drivers/bluetooth/btmtksdio.c | 8 ++++++++ 1 file changed, 8 insertions(+)
From: Sean Wang <sean.wang@mediatek.com>
'ce64b3e94919 ("Bluetooth: mt7921s: Support wake on bluetooth")'
have added the waken-on-bluetooth via dedicated GPIO.
The patch extends the function to the waken-on-bluetooth via SDIO DAT1 pin
(inband wakeup) when the SDIO host driver is able to support.
Co-developed-by: Yake Yang <yake.yang@mediatek.com>
Signed-off-by: Yake Yang <yake.yang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
drivers/bluetooth/btmtksdio.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index d6700efcfe8c..9ed3af4ba51a 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -118,6 +118,7 @@ MODULE_DEVICE_TABLE(sdio, btmtksdio_table);
#define BTMTKSDIO_FUNC_ENABLED 3
#define BTMTKSDIO_PATCH_ENABLED 4
#define BTMTKSDIO_HW_RESET_ACTIVE 5
+#define BTMTKSDIO_INBAND_WAKEUP 6
struct mtkbtsdio_hdr {
__le16 len;
@@ -1294,6 +1295,9 @@ static bool btmtksdio_sdio_wakeup(struct hci_dev *hdev)
.wakeup_delay = cpu_to_le16(0x20),
};
+ if (test_bit(BTMTKSDIO_INBAND_WAKEUP, &bdev->tx_state))
+ return may_wakeup;
+
if (may_wakeup && bdev->data->chipid == 0x7921) {
struct sk_buff *skb;
@@ -1384,6 +1388,10 @@ static int btmtksdio_probe(struct sdio_func *func,
*/
pm_runtime_put_noidle(bdev->dev);
+ /* Mark if the mmc host can support waken by SDIO */
+ if (device_can_wakeup(func->card->host->parent))
+ set_bit(BTMTKSDIO_INBAND_WAKEUP, &bdev->tx_state);
+
err = device_init_wakeup(bdev->dev, true);
if (err)
bt_dev_err(hdev, "failed to initialize device wakeup");
--
2.25.1
Dear Sean, Thank you for the patch. Am 10.06.22 um 02:17 schrieb sean.wang@mediatek.com: > From: Sean Wang <sean.wang@mediatek.com> > > 'ce64b3e94919 ("Bluetooth: mt7921s: Support wake on bluetooth")' > have added the waken-on-bluetooth via dedicated GPIO. Maybe: Commit ce64b3e94919 ("Bluetooth: mt7921s: Support wake on bluetooth") adds the wake on bluethooth via a dedicated GPIO. > The patch extends the function to the waken-on-bluetooth via SDIO DAT1 pin > (inband wakeup) when the SDIO host driver is able to support. Maybe: Extend the wake-on-bluetooth to use the SDIO DAT1 pin (in-band wakeup), when supported by the SDIO host driver. How did you test this? In what datasheet is it documented? > Co-developed-by: Yake Yang <yake.yang@mediatek.com> > Signed-off-by: Yake Yang <yake.yang@mediatek.com> > Signed-off-by: Sean Wang <sean.wang@mediatek.com> > --- > drivers/bluetooth/btmtksdio.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c > index d6700efcfe8c..9ed3af4ba51a 100644 > --- a/drivers/bluetooth/btmtksdio.c > +++ b/drivers/bluetooth/btmtksdio.c > @@ -118,6 +118,7 @@ MODULE_DEVICE_TABLE(sdio, btmtksdio_table); > #define BTMTKSDIO_FUNC_ENABLED 3 > #define BTMTKSDIO_PATCH_ENABLED 4 > #define BTMTKSDIO_HW_RESET_ACTIVE 5 > +#define BTMTKSDIO_INBAND_WAKEUP 6 > > struct mtkbtsdio_hdr { > __le16 len; > @@ -1294,6 +1295,9 @@ static bool btmtksdio_sdio_wakeup(struct hci_dev *hdev) > .wakeup_delay = cpu_to_le16(0x20), > }; > > + if (test_bit(BTMTKSDIO_INBAND_WAKEUP, &bdev->tx_state)) > + return may_wakeup; > + > if (may_wakeup && bdev->data->chipid == 0x7921) { > struct sk_buff *skb; > > @@ -1384,6 +1388,10 @@ static int btmtksdio_probe(struct sdio_func *func, > */ > pm_runtime_put_noidle(bdev->dev); > > + /* Mark if the mmc host can support waken by SDIO */ Maybe: Mark if MMC host supports wake on bluetooth by SDIO > + if (device_can_wakeup(func->card->host->parent)) > + set_bit(BTMTKSDIO_INBAND_WAKEUP, &bdev->tx_state); > + > err = device_init_wakeup(bdev->dev, true); > if (err) > bt_dev_err(hdev, "failed to initialize device wakeup"); Kind regards, Paul
© 2016 - 2024 Red Hat, Inc.