Replace the legacy of_get_named_gpio() / gpio_request_one() /
gpio_set_value() API with the descriptor-based devm_gpiod_get_optional() /
gpiod_set_value() API from <linux/gpio/consumer.h>, removing the
dependency on <linux/of_gpio.h>.

The "reset-n-io" property rename quirk already exists in gpiolib-of.c
(added in commit 9c2cc7171e08), so no additional quirk is needed.

Signed-off-by: Jialu Xu <xujialu@vimux.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
---
 drivers/nfc/nfcmrvl/main.c    | 47 ++++++++++++-----------------------
 drivers/nfc/nfcmrvl/nfcmrvl.h |  4 ++-
 drivers/nfc/nfcmrvl/uart.c    | 23 +++++++++++------
 drivers/nfc/nfcmrvl/usb.c     |  2 +-
 4 files changed, 36 insertions(+), 40 deletions(-)

diff --git a/drivers/nfc/nfcmrvl/main.c b/drivers/nfc/nfcmrvl/main.c
index c51d22e4579c1..6efa832191172 100644
--- a/drivers/nfc/nfcmrvl/main.c
+++ b/drivers/nfc/nfcmrvl/main.c
@@ -6,9 +6,9 @@
  */
 
 #include <linux/module.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
-#include <linux/of_gpio.h>
+#include <linux/of.h>
 #include <linux/nfc.h>
 #include <net/nfc/nci.h>
 #include <net/nfc/nci_core.h>
@@ -112,13 +112,12 @@ struct nfcmrvl_private *nfcmrvl_nci_register_dev(enum nfcmrvl_phy phy,
 
 	memcpy(&priv->config, pdata, sizeof(*pdata));
 
-	if (gpio_is_valid(priv->config.reset_n_io)) {
-		rc = gpio_request_one(priv->config.reset_n_io,
-				      GPIOF_OUT_INIT_LOW,
-				      "nfcmrvl_reset_n");
-		if (rc < 0) {
-			priv->config.reset_n_io = -EINVAL;
-			nfc_err(dev, "failed to request reset_n io\n");
+	if (!priv->config.reset_gpio) {
+		priv->config.reset_gpio =
+			devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+		if (IS_ERR(priv->config.reset_gpio)) {
+			priv->config.reset_gpio = NULL;
+			nfc_err(dev, "failed to get reset gpio\n");
 		}
 	}
 
@@ -144,7 +143,7 @@ struct nfcmrvl_private *nfcmrvl_nci_register_dev(enum nfcmrvl_phy phy,
 	if (!priv->ndev) {
 		nfc_err(dev, "nci_allocate_device failed\n");
 		rc = -ENOMEM;
-		goto error_free_gpio;
+		goto error_free;
 	}
 
 	rc = nfcmrvl_fw_dnld_init(priv);
@@ -171,9 +170,7 @@ struct nfcmrvl_private *nfcmrvl_nci_register_dev(enum nfcmrvl_phy phy,
 	nfcmrvl_fw_dnld_deinit(priv);
 error_free_dev:
 	nci_free_device(priv->ndev);
-error_free_gpio:
-	if (gpio_is_valid(priv->config.reset_n_io))
-		gpio_free(priv->config.reset_n_io);
+error_free:
 	kfree(priv);
 	return ERR_PTR(rc);
 }
@@ -189,9 +186,6 @@ void nfcmrvl_nci_unregister_dev(struct nfcmrvl_private *priv)
 
 	nfcmrvl_fw_dnld_deinit(priv);
 
-	if (gpio_is_valid(priv->config.reset_n_io))
-		gpio_free(priv->config.reset_n_io);
-
 	nci_free_device(ndev);
 	kfree(priv);
 }
@@ -233,34 +227,25 @@ void nfcmrvl_chip_reset(struct nfcmrvl_private *priv)
 	/* Reset possible fault of previous session */
 	clear_bit(NFCMRVL_PHY_ERROR, &priv->flags);
 
-	if (gpio_is_valid(priv->config.reset_n_io)) {
+	if (priv->config.reset_gpio) {
 		nfc_info(priv->dev, "reset the chip\n");
-		gpio_set_value(priv->config.reset_n_io, 0);
+		gpiod_set_value(priv->config.reset_gpio, 1);
 		usleep_range(5000, 10000);
-		gpio_set_value(priv->config.reset_n_io, 1);
+		gpiod_set_value(priv->config.reset_gpio, 0);
 	} else
 		nfc_info(priv->dev, "no reset available on this interface\n");
 }
 
 void nfcmrvl_chip_halt(struct nfcmrvl_private *priv)
 {
-	if (gpio_is_valid(priv->config.reset_n_io))
-		gpio_set_value(priv->config.reset_n_io, 0);
+	if (priv->config.reset_gpio)
+		gpiod_set_value(priv->config.reset_gpio, 1);
 }
 
 int nfcmrvl_parse_dt(struct device_node *node,
 		     struct nfcmrvl_platform_data *pdata)
 {
-	int reset_n_io;
-
-	reset_n_io = of_get_named_gpio(node, "reset-n-io", 0);
-	if (reset_n_io < 0) {
-		pr_info("no reset-n-io config\n");
-	} else if (!gpio_is_valid(reset_n_io)) {
-		pr_err("invalid reset-n-io GPIO\n");
-		return reset_n_io;
-	}
-	pdata->reset_n_io = reset_n_io;
+	pdata->reset_gpio = NULL;
 	pdata->hci_muxed = of_property_read_bool(node, "hci-muxed");
 
 	return 0;
diff --git a/drivers/nfc/nfcmrvl/nfcmrvl.h b/drivers/nfc/nfcmrvl/nfcmrvl.h
index f61a99e553db0..62fa77d587b2b 100644
--- a/drivers/nfc/nfcmrvl/nfcmrvl.h
+++ b/drivers/nfc/nfcmrvl/nfcmrvl.h
@@ -10,6 +10,8 @@
 
 #include "fw_dnld.h"
 
+struct gpio_desc;
+
 /* Define private flags: */
 #define NFCMRVL_NCI_RUNNING			1
 #define NFCMRVL_PHY_ERROR			2
@@ -54,7 +56,7 @@ struct nfcmrvl_platform_data {
 	 */
 
 	/* GPIO that is wired to RESET_N signal */
-	int reset_n_io;
+	struct gpio_desc *reset_gpio;
 	/* Tell if transport is muxed in HCI one */
 	bool hci_muxed;
 
diff --git a/drivers/nfc/nfcmrvl/uart.c b/drivers/nfc/nfcmrvl/uart.c
index 2037cd6d4f4f4..9aedd168759c7 100644
--- a/drivers/nfc/nfcmrvl/uart.c
+++ b/drivers/nfc/nfcmrvl/uart.c
@@ -8,6 +8,7 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/err.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/printk.h>
@@ -20,7 +21,6 @@
 static unsigned int hci_muxed;
 static unsigned int flow_control;
 static unsigned int break_control;
-static int reset_n_io = -EINVAL;
 
 /*
  * NFCMRVL NCI OPS
@@ -62,9 +62,11 @@ static const struct nfcmrvl_if_ops uart_ops = {
 };
 
 static int nfcmrvl_uart_parse_dt(struct device_node *node,
-				 struct nfcmrvl_platform_data *pdata)
+				 struct nfcmrvl_platform_data *pdata,
+				 struct device *dev)
 {
 	struct device_node *matched_node;
+	struct gpio_desc *reset_gpio;
 	int ret;
 
 	matched_node = of_get_compatible_child(node, "marvell,nfc-uart");
@@ -84,6 +86,16 @@ static int nfcmrvl_uart_parse_dt(struct device_node *node,
 	pdata->flow_control = of_property_read_bool(matched_node, "flow-control");
 	pdata->break_control = of_property_read_bool(matched_node, "break-control");
 
+	reset_gpio = devm_fwnode_gpiod_get_optional(dev,
+						    of_fwnode_handle(matched_node),
+						    "reset", GPIOD_OUT_HIGH,
+						    "nfcmrvl_reset_n");
+	if (IS_ERR(reset_gpio)) {
+		of_node_put(matched_node);
+		return PTR_ERR(reset_gpio);
+	}
+	pdata->reset_gpio = reset_gpio;
+
 	of_node_put(matched_node);
 
 	return 0;
@@ -107,13 +119,13 @@ static int nfcmrvl_nci_uart_open(struct nci_uart *nu)
 	 */
 
 	if (dev && dev->parent && dev->parent->of_node)
-		if (nfcmrvl_uart_parse_dt(dev->parent->of_node, &config) == 0)
+		if (nfcmrvl_uart_parse_dt(dev->parent->of_node, &config, dev) == 0)
 			pdata = &config;
 
 	if (!pdata) {
 		pr_info("No platform data / DT -> fallback to module params\n");
 		config.hci_muxed = hci_muxed;
-		config.reset_n_io = reset_n_io;
+		config.reset_gpio = NULL;
 		config.flow_control = flow_control;
 		config.break_control = break_control;
 		pdata = &config;
@@ -201,6 +213,3 @@ MODULE_PARM_DESC(break_control, "Tell if UART driver must drive break signal.");
 
 module_param(hci_muxed, uint, 0);
 MODULE_PARM_DESC(hci_muxed, "Tell if transport is muxed in HCI one.");
-
-module_param(reset_n_io, int, 0);
-MODULE_PARM_DESC(reset_n_io, "GPIO that is wired to RESET_N signal.");
diff --git a/drivers/nfc/nfcmrvl/usb.c b/drivers/nfc/nfcmrvl/usb.c
index ea73094530968..ac62358445bf8 100644
--- a/drivers/nfc/nfcmrvl/usb.c
+++ b/drivers/nfc/nfcmrvl/usb.c
@@ -294,7 +294,7 @@ static int nfcmrvl_probe(struct usb_interface *intf,
 
 	/* No configuration for USB */
 	memset(&config, 0, sizeof(config));
-	config.reset_n_io = -EINVAL;
+	config.reset_gpio = NULL;
 
 	nfc_info(&udev->dev, "intf %p id %p\n", intf, id);
 
-- 
2.47.3