drivers/pinctrl/renesas/pinctrl-rzv2m.c | 28 ++++++++++++++++++------- 1 file changed, 20 insertions(+), 8 deletions(-)
The eMMC and SDHI pin control configuration nodes in DT have subnodes
with the same names ("data" and "ctrl"). As the RZ/V2M pin control
driver considers only the names of the subnodes, this leads to
conflicts:
pinctrl-rzv2m b6250000.pinctrl: pin P8_2 already requested by 85000000.mmc; cannot claim for 85020000.mmc
pinctrl-rzv2m b6250000.pinctrl: pin-130 (85020000.mmc) status -22
renesas_sdhi_internal_dmac 85020000.mmc: Error applying setting, reverse things back
Fix this by constructing unique names from the node names of both the
pin control configuration node and its child node, where appropriate.
Reported by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Fixes: 92a9b825257614af ("pinctrl: renesas: Add RZ/V2M pin and gpio controller driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Untested on real hardware.
The RZ/G2L pin control drivers needs a similar fix.
Before:
$ cat /sys/kernel/debug/pinctrl/b6250000.pinctrl/pingroups
registered pin groups:
group: data
pin 130 (P8_2)
pin 131 (P8_3)
pin 132 (P8_4)
pin 133 (P8_5)
group: ctrl
pin 128 (P8_0)
pin 129 (P8_1)
group: cd
pin 135 (P8_7)
$ cat /sys/kernel/debug/pinctrl/b6250000.pinctrl/pinmux-functions
function 0: data, groups = [ data ]
function 1: ctrl, groups = [ ctrl ]
function 2: cd, groups = [ cd ]
After:
$ cat /sys/kernel/debug/pinctrl/b6250000.pinctrl/pingroups
registered pin groups:
group: sd0.data
pin 130 (P8_2)
pin 131 (P8_3)
pin 132 (P8_4)
pin 133 (P8_5)
group: emmc.data
pin 0 (P0_0)
pin 1 (P0_1)
pin 2 (P0_2)
pin 3 (P0_3)
pin 4 (P0_4)
pin 5 (P0_5)
pin 6 (P0_6)
pin 7 (P0_7)
group: sd0.ctrl
pin 128 (P8_0)
pin 129 (P8_1)
group: emmc.ctrl
pin 10 (P0_10)
pin 11 (P0_11)
group: sd0.cd
pin 135 (P8_7)
group: sd0-uhs.data
pin 130 (P8_2)
pin 131 (P8_3)
pin 132 (P8_4)
pin 133 (P8_5)
group: sd0-uhs.ctrl
pin 128 (P8_0)
pin 129 (P8_1)
group: sd0-uhs.cd
pin 135 (P8_7)
$ cat /sys/kernel/debug/pinctrl/b6250000.pinctrl/pinmux-functions
function 0: sd0.data, groups = [ sd0.data ]
function 1: emmc.data, groups = [ emmc.data ]
function 2: sd0.ctrl, groups = [ sd0.ctrl ]
function 3: sd0.cd, groups = [ sd0.cd ]
function 4: emmc.ctrl, groups = [ emmc.ctrl ]
function 5: sd0-uhs.data, groups = [ sd0-uhs.data ]
function 6: sd0-uhs.ctrl, groups = [ sd0-uhs.ctrl ]
function 7: sd0-uhs.cd, groups = [ sd0-uhs.cd ]
---
drivers/pinctrl/renesas/pinctrl-rzv2m.c | 28 ++++++++++++++++++-------
1 file changed, 20 insertions(+), 8 deletions(-)
diff --git a/drivers/pinctrl/renesas/pinctrl-rzv2m.c b/drivers/pinctrl/renesas/pinctrl-rzv2m.c
index e5472293bc7fb247..35b23c1a5684d3e4 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzv2m.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzv2m.c
@@ -209,6 +209,7 @@ static int rzv2m_map_add_config(struct pinctrl_map *map,
static int rzv2m_dt_subnode_to_map(struct pinctrl_dev *pctldev,
struct device_node *np,
+ struct device_node *parent,
struct pinctrl_map **map,
unsigned int *num_maps,
unsigned int *index)
@@ -226,6 +227,7 @@ static int rzv2m_dt_subnode_to_map(struct pinctrl_dev *pctldev,
struct property *prop;
int ret, gsel, fsel;
const char **pin_fn;
+ const char *name;
const char *pin;
pinmux = of_find_property(np, "pinmux", NULL);
@@ -309,8 +311,19 @@ static int rzv2m_dt_subnode_to_map(struct pinctrl_dev *pctldev,
psel_val[i] = MUX_FUNC(value);
}
+ if (parent) {
+ name = devm_kasprintf(pctrl->dev, GFP_KERNEL, "%pOFn.%pOFn",
+ parent, np);
+ if (!name) {
+ ret = -ENOMEM;
+ goto done;
+ }
+ } else {
+ name = np->name;
+ }
+
/* Register a single pin group listing all the pins we read from DT */
- gsel = pinctrl_generic_add_group(pctldev, np->name, pins, num_pinmux, NULL);
+ gsel = pinctrl_generic_add_group(pctldev, name, pins, num_pinmux, NULL);
if (gsel < 0) {
ret = gsel;
goto done;
@@ -320,17 +333,16 @@ static int rzv2m_dt_subnode_to_map(struct pinctrl_dev *pctldev,
* Register a single group function where the 'data' is an array PSEL
* register values read from DT.
*/
- pin_fn[0] = np->name;
- fsel = pinmux_generic_add_function(pctldev, np->name, pin_fn, 1,
- psel_val);
+ pin_fn[0] = name;
+ fsel = pinmux_generic_add_function(pctldev, name, pin_fn, 1, psel_val);
if (fsel < 0) {
ret = fsel;
goto remove_group;
}
maps[idx].type = PIN_MAP_TYPE_MUX_GROUP;
- maps[idx].data.mux.group = np->name;
- maps[idx].data.mux.function = np->name;
+ maps[idx].data.mux.group = name;
+ maps[idx].data.mux.function = name;
idx++;
dev_dbg(pctrl->dev, "Parsed %pOF with %d pins\n", np, num_pinmux);
@@ -377,7 +389,7 @@ static int rzv2m_dt_node_to_map(struct pinctrl_dev *pctldev,
index = 0;
for_each_child_of_node(np, child) {
- ret = rzv2m_dt_subnode_to_map(pctldev, child, map,
+ ret = rzv2m_dt_subnode_to_map(pctldev, child, np, map,
num_maps, &index);
if (ret < 0) {
of_node_put(child);
@@ -386,7 +398,7 @@ static int rzv2m_dt_node_to_map(struct pinctrl_dev *pctldev,
}
if (*num_maps == 0) {
- ret = rzv2m_dt_subnode_to_map(pctldev, np, map,
+ ret = rzv2m_dt_subnode_to_map(pctldev, np, NULL, map,
num_maps, &index);
if (ret < 0)
goto done;
--
2.34.1+ Fabrizio
Kind regards, Chris
> From: Geert Uytterhoeven <geert+renesas@glider.be>
> Sent: Monday, July 3, 2023 4:07 PM
>
> The eMMC and SDHI pin control configuration nodes in DT have subnodes
> with the same names ("data" and "ctrl"). As the RZ/V2M pin control
> driver considers only the names of the subnodes, this leads to
> conflicts:
>
> pinctrl-rzv2m b6250000.pinctrl: pin P8_2 already requested by
> 85000000.mmc; cannot claim for 85020000.mmc
> pinctrl-rzv2m b6250000.pinctrl: pin-130 (85020000.mmc) status -22
> renesas_sdhi_internal_dmac 85020000.mmc: Error applying setting,
> reverse things back
>
> Fix this by constructing unique names from the node names of both the
> pin control configuration node and its child node, where appropriate.
>
> Reported by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> Fixes: 92a9b825257614af ("pinctrl: renesas: Add RZ/V2M pin and gpio
> controller driver")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> Untested on real hardware.
> The RZ/G2L pin control drivers needs a similar fix.
>
> Before:
>
> $ cat /sys/kernel/debug/pinctrl/b6250000.pinctrl/pingroups
> registered pin groups:
> group: data
> pin 130 (P8_2)
> pin 131 (P8_3)
> pin 132 (P8_4)
> pin 133 (P8_5)
>
> group: ctrl
> pin 128 (P8_0)
> pin 129 (P8_1)
>
> group: cd
> pin 135 (P8_7)
>
> $ cat /sys/kernel/debug/pinctrl/b6250000.pinctrl/pinmux-functions
> function 0: data, groups = [ data ]
> function 1: ctrl, groups = [ ctrl ]
> function 2: cd, groups = [ cd ]
>
> After:
>
> $ cat /sys/kernel/debug/pinctrl/b6250000.pinctrl/pingroups
> registered pin groups:
> group: sd0.data
> pin 130 (P8_2)
> pin 131 (P8_3)
> pin 132 (P8_4)
> pin 133 (P8_5)
>
> group: emmc.data
> pin 0 (P0_0)
> pin 1 (P0_1)
> pin 2 (P0_2)
> pin 3 (P0_3)
> pin 4 (P0_4)
> pin 5 (P0_5)
> pin 6 (P0_6)
> pin 7 (P0_7)
>
> group: sd0.ctrl
> pin 128 (P8_0)
> pin 129 (P8_1)
>
> group: emmc.ctrl
> pin 10 (P0_10)
> pin 11 (P0_11)
>
> group: sd0.cd
> pin 135 (P8_7)
>
> group: sd0-uhs.data
> pin 130 (P8_2)
> pin 131 (P8_3)
> pin 132 (P8_4)
> pin 133 (P8_5)
>
> group: sd0-uhs.ctrl
> pin 128 (P8_0)
> pin 129 (P8_1)
>
> group: sd0-uhs.cd
> pin 135 (P8_7)
>
> $ cat /sys/kernel/debug/pinctrl/b6250000.pinctrl/pinmux-functions
> function 0: sd0.data, groups = [ sd0.data ]
> function 1: emmc.data, groups = [ emmc.data ]
> function 2: sd0.ctrl, groups = [ sd0.ctrl ]
> function 3: sd0.cd, groups = [ sd0.cd ]
> function 4: emmc.ctrl, groups = [ emmc.ctrl ]
> function 5: sd0-uhs.data, groups = [ sd0-uhs.data ]
> function 6: sd0-uhs.ctrl, groups = [ sd0-uhs.ctrl ]
> function 7: sd0-uhs.cd, groups = [ sd0-uhs.cd ]
> ---
> drivers/pinctrl/renesas/pinctrl-rzv2m.c | 28 ++++++++++++++++++-------
> 1 file changed, 20 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/pinctrl/renesas/pinctrl-rzv2m.c
> b/drivers/pinctrl/renesas/pinctrl-rzv2m.c
> index e5472293bc7fb247..35b23c1a5684d3e4 100644
> --- a/drivers/pinctrl/renesas/pinctrl-rzv2m.c
> +++ b/drivers/pinctrl/renesas/pinctrl-rzv2m.c
> @@ -209,6 +209,7 @@ static int rzv2m_map_add_config(struct pinctrl_map
> *map,
>
> static int rzv2m_dt_subnode_to_map(struct pinctrl_dev *pctldev,
> struct device_node *np,
> + struct device_node *parent,
> struct pinctrl_map **map,
> unsigned int *num_maps,
> unsigned int *index)
> @@ -226,6 +227,7 @@ static int rzv2m_dt_subnode_to_map(struct
> pinctrl_dev *pctldev,
> struct property *prop;
> int ret, gsel, fsel;
> const char **pin_fn;
> + const char *name;
> const char *pin;
>
> pinmux = of_find_property(np, "pinmux", NULL);
> @@ -309,8 +311,19 @@ static int rzv2m_dt_subnode_to_map(struct
> pinctrl_dev *pctldev,
> psel_val[i] = MUX_FUNC(value);
> }
>
> + if (parent) {
> + name = devm_kasprintf(pctrl->dev, GFP_KERNEL,
> "%pOFn.%pOFn",
> + parent, np);
> + if (!name) {
> + ret = -ENOMEM;
> + goto done;
> + }
> + } else {
> + name = np->name;
> + }
> +
> /* Register a single pin group listing all the pins we read from DT */
> - gsel = pinctrl_generic_add_group(pctldev, np->name, pins,
> num_pinmux, NULL);
> + gsel = pinctrl_generic_add_group(pctldev, name, pins, num_pinmux,
> NULL);
> if (gsel < 0) {
> ret = gsel;
> goto done;
> @@ -320,17 +333,16 @@ static int rzv2m_dt_subnode_to_map(struct
> pinctrl_dev *pctldev,
> * Register a single group function where the 'data' is an array PSEL
> * register values read from DT.
> */
> - pin_fn[0] = np->name;
> - fsel = pinmux_generic_add_function(pctldev, np->name, pin_fn, 1,
> - psel_val);
> + pin_fn[0] = name;
> + fsel = pinmux_generic_add_function(pctldev, name, pin_fn, 1,
> psel_val);
> if (fsel < 0) {
> ret = fsel;
> goto remove_group;
> }
>
> maps[idx].type = PIN_MAP_TYPE_MUX_GROUP;
> - maps[idx].data.mux.group = np->name;
> - maps[idx].data.mux.function = np->name;
> + maps[idx].data.mux.group = name;
> + maps[idx].data.mux.function = name;
> idx++;
>
> dev_dbg(pctrl->dev, "Parsed %pOF with %d pins\n", np,
> num_pinmux);
> @@ -377,7 +389,7 @@ static int rzv2m_dt_node_to_map(struct pinctrl_dev
> *pctldev,
> index = 0;
>
> for_each_child_of_node(np, child) {
> - ret = rzv2m_dt_subnode_to_map(pctldev, child, map,
> + ret = rzv2m_dt_subnode_to_map(pctldev, child, np, map,
> num_maps, &index);
> if (ret < 0) {
> of_node_put(child);
> @@ -386,7 +398,7 @@ static int rzv2m_dt_node_to_map(struct pinctrl_dev
> *pctldev,
> }
>
> if (*num_maps == 0) {
> - ret = rzv2m_dt_subnode_to_map(pctldev, np, map,
> + ret = rzv2m_dt_subnode_to_map(pctldev, np, NULL, map,
> num_maps, &index);
> if (ret < 0)
> goto done;
> --
> 2.34.1
On Mon, Jul 3, 2023 at 5:07 PM Geert Uytterhoeven
<geert+renesas@glider.be> wrote:
> The eMMC and SDHI pin control configuration nodes in DT have subnodes
> with the same names ("data" and "ctrl"). As the RZ/V2M pin control
> driver considers only the names of the subnodes, this leads to
> conflicts:
>
> pinctrl-rzv2m b6250000.pinctrl: pin P8_2 already requested by 85000000.mmc; cannot claim for 85020000.mmc
> pinctrl-rzv2m b6250000.pinctrl: pin-130 (85020000.mmc) status -22
> renesas_sdhi_internal_dmac 85020000.mmc: Error applying setting, reverse things back
>
> Fix this by constructing unique names from the node names of both the
> pin control configuration node and its child node, where appropriate.
>
> Reported by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> Fixes: 92a9b825257614af ("pinctrl: renesas: Add RZ/V2M pin and gpio controller driver")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> Untested on real hardware.
> The RZ/G2L pin control drivers needs a similar fix.
If I need to merge this for fixes it's be great if we could also
include a fix for RX/G2L.
Anyway, I expect a pull request for renesas fixes or some explicit
instruction on
what to do when it's tested and confirmed working.
Yours,
Linus Walleij
Hi Linus W,
> Subject: Re: [PATCH/RFT] pinctrl: renesas: rzv2m: Handle non-unique
> subnode names
>
> On Mon, Jul 3, 2023 at 5:07 PM Geert Uytterhoeven
> <geert+renesas@glider.be> wrote:
>
> > The eMMC and SDHI pin control configuration nodes in DT have subnodes
> > with the same names ("data" and "ctrl"). As the RZ/V2M pin control
> > driver considers only the names of the subnodes, this leads to
> > conflicts:
> >
> > pinctrl-rzv2m b6250000.pinctrl: pin P8_2 already requested by
> 85000000.mmc; cannot claim for 85020000.mmc
> > pinctrl-rzv2m b6250000.pinctrl: pin-130 (85020000.mmc) status -22
> > renesas_sdhi_internal_dmac 85020000.mmc: Error applying setting,
> > reverse things back
> >
> > Fix this by constructing unique names from the node names of both the
> > pin control configuration node and its child node, where appropriate.
> >
> > Reported by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> > Fixes: 92a9b825257614af ("pinctrl: renesas: Add RZ/V2M pin and gpio
> > controller driver")
> > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> > ---
> > Untested on real hardware.
> > The RZ/G2L pin control drivers needs a similar fix.
>
> If I need to merge this for fixes it's be great if we could also include
> a fix for RX/G2L.
>
> Anyway, I expect a pull request for renesas fixes or some explicit
> instruction on what to do when it's tested and confirmed working.
OK, I will prepare a similar patch for RZ/G2L and will test and confirm.
Cheers,
Biju
Hi Geert,
Thank you for your patch!
> From: Geert Uytterhoeven <geert+renesas@glider.be>
> Subject: [PATCH/RFT] pinctrl: renesas: rzv2m: Handle non-unique subnode
> names
>
> The eMMC and SDHI pin control configuration nodes in DT have subnodes
> with the same names ("data" and "ctrl"). As the RZ/V2M pin control
> driver considers only the names of the subnodes, this leads to
> conflicts:
>
> pinctrl-rzv2m b6250000.pinctrl: pin P8_2 already requested by
> 85000000.mmc; cannot claim for 85020000.mmc
> pinctrl-rzv2m b6250000.pinctrl: pin-130 (85020000.mmc) status -22
> renesas_sdhi_internal_dmac 85020000.mmc: Error applying setting, reverse
> things back
>
> Fix this by constructing unique names from the node names of both the
> pin control configuration node and its child node, where appropriate.
>
> Reported by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> Fixes: 92a9b825257614af ("pinctrl: renesas: Add RZ/V2M pin and gpio
> controller driver")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
On Tue, Jul 4, 2023 at 5:48 PM Fabrizio Castro
<fabrizio.castro.jz@renesas.com> wrote:
> > From: Geert Uytterhoeven <geert+renesas@glider.be>
> > Subject: [PATCH/RFT] pinctrl: renesas: rzv2m: Handle non-unique subnode
> > names
> >
> > The eMMC and SDHI pin control configuration nodes in DT have subnodes
> > with the same names ("data" and "ctrl"). As the RZ/V2M pin control
> > driver considers only the names of the subnodes, this leads to
> > conflicts:
> >
> > pinctrl-rzv2m b6250000.pinctrl: pin P8_2 already requested by
> > 85000000.mmc; cannot claim for 85020000.mmc
> > pinctrl-rzv2m b6250000.pinctrl: pin-130 (85020000.mmc) status -22
> > renesas_sdhi_internal_dmac 85020000.mmc: Error applying setting, reverse
> > things back
> >
> > Fix this by constructing unique names from the node names of both the
> > pin control configuration node and its child node, where appropriate.
> >
> > Reported by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> > Fixes: 92a9b825257614af ("pinctrl: renesas: Add RZ/V2M pin and gpio
> > controller driver")
> > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
>
> Tested-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Thanks, will queue as a fix in renesas-pinctrl-for-v6.5.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
© 2016 - 2026 Red Hat, Inc.