If we're returning because "reg >= HX9023S_CH_NUM" then set the error code
to -ENIVAL instead of success.

Fixes: 60df548277b7 ("iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity sensor")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
---
 drivers/iio/proximity/hx9023s.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/proximity/hx9023s.c b/drivers/iio/proximity/hx9023s.c
index fe14a62a1342..8b9f84400e00 100644
--- a/drivers/iio/proximity/hx9023s.c
+++ b/drivers/iio/proximity/hx9023s.c
@@ -598,7 +598,8 @@ static int hx9023s_property_get(struct hx9023s_data *data)
 	device_for_each_child_node_scoped(dev, child) {
 		ret = fwnode_property_read_u32(child, "reg", &reg);
 		if (ret || reg >= HX9023S_CH_NUM)
-			return dev_err_probe(dev, ret, "Failed to read reg\n");
+			return dev_err_probe(dev, ret < 0 ? ret : -EINVAL,
+					     "Failed to read reg\n");
 		__set_bit(reg, &data->chan_in_use);
 
 		ret = fwnode_property_read_u32(child, "single-channel", &temp);
-- 
2.43.0

On Mon, 12 Aug 2024 09:43:05 +0300
Dan Carpenter <dan.carpenter@linaro.org> wrote:

> If we're returning because "reg >= HX9023S_CH_NUM" then set the error code
> to -ENIVAL instead of success.
> 
> Fixes: 60df548277b7 ("iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity sensor")
> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Hi Dan,

Applied,

Thanks,

Jonathan

> ---
>  drivers/iio/proximity/hx9023s.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/proximity/hx9023s.c b/drivers/iio/proximity/hx9023s.c
> index fe14a62a1342..8b9f84400e00 100644
> --- a/drivers/iio/proximity/hx9023s.c
> +++ b/drivers/iio/proximity/hx9023s.c
> @@ -598,7 +598,8 @@ static int hx9023s_property_get(struct hx9023s_data *data)
>  	device_for_each_child_node_scoped(dev, child) {
>  		ret = fwnode_property_read_u32(child, "reg", &reg);
>  		if (ret || reg >= HX9023S_CH_NUM)
> -			return dev_err_probe(dev, ret, "Failed to read reg\n");
> +			return dev_err_probe(dev, ret < 0 ? ret : -EINVAL,
> +					     "Failed to read reg\n");
>  		__set_bit(reg, &data->chan_in_use);
>  
>  		ret = fwnode_property_read_u32(child, "single-channel", &temp);