[RESEND][PATCH v1 1/8] thermal: broadcom: Use thermal_zone_get_crit_temp() in bcm2835_thermal_probe()

Posted by Rafael J. Wysocki 1 year, 6 months ago

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Modify the bcm2835 thermal driver to use thermal_zone_get_crit_temp() in
bcm2835_thermal_probe() instead of relying on the assumption that the
critical trip index will always be 0.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/thermal/broadcom/bcm2835_thermal.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

Index: linux-pm/drivers/thermal/broadcom/bcm2835_thermal.c
===================================================================
--- linux-pm.orig/drivers/thermal/broadcom/bcm2835_thermal.c
+++ linux-pm/drivers/thermal/broadcom/bcm2835_thermal.c
@@ -208,8 +208,7 @@ static int bcm2835_thermal_probe(struct
 	 */
 	val = readl(data->regs + BCM2835_TS_TSENSCTL);
 	if (!(val & BCM2835_TS_TSENSCTL_RSTB)) {
-		struct thermal_trip trip;
-		int offset, slope;
+		int offset, slope, crit_temp;
 
 		slope = thermal_zone_get_slope(tz);
 		offset = thermal_zone_get_offset(tz);
@@ -217,7 +216,7 @@ static int bcm2835_thermal_probe(struct
 		 * For now we deal only with critical, otherwise
 		 * would need to iterate
 		 */
-		err = thermal_zone_get_trip(tz, 0, &trip);
+		err = thermal_zone_get_crit_temp(tz, &crit_temp);
 		if (err < 0) {
 			dev_err(dev, "Not able to read trip_temp: %d\n", err);
 			return err;
@@ -232,7 +231,7 @@ static int bcm2835_thermal_probe(struct
 		val |= (0xFE << BCM2835_TS_TSENSCTL_RSTDELAY_SHIFT);
 
 		/*  trip_adc value from info */
-		val |= bcm2835_thermal_temp2adc(trip.temperature,
+		val |= bcm2835_thermal_temp2adc(crit_temp,
 						offset,
 						slope)
 			<< BCM2835_TS_TSENSCTL_THOLD_SHIFT;

Re: [RESEND][PATCH v1 1/8] thermal: broadcom: Use thermal_zone_get_crit_temp() in bcm2835_thermal_probe()

Posted by Lukasz Luba 1 year, 6 months ago


On 7/29/24 16:53, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> 
> Modify the bcm2835 thermal driver to use thermal_zone_get_crit_temp() in
> bcm2835_thermal_probe() instead of relying on the assumption that the
> critical trip index will always be 0.
> 
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
>   drivers/thermal/broadcom/bcm2835_thermal.c |    7 +++----
>   1 file changed, 3 insertions(+), 4 deletions(-)
> 
> Index: linux-pm/drivers/thermal/broadcom/bcm2835_thermal.c
> ===================================================================
> --- linux-pm.orig/drivers/thermal/broadcom/bcm2835_thermal.c
> +++ linux-pm/drivers/thermal/broadcom/bcm2835_thermal.c
> @@ -208,8 +208,7 @@ static int bcm2835_thermal_probe(struct
>   	 */
>   	val = readl(data->regs + BCM2835_TS_TSENSCTL);
>   	if (!(val & BCM2835_TS_TSENSCTL_RSTB)) {
> -		struct thermal_trip trip;
> -		int offset, slope;
> +		int offset, slope, crit_temp;
>   
>   		slope = thermal_zone_get_slope(tz);
>   		offset = thermal_zone_get_offset(tz);
> @@ -217,7 +216,7 @@ static int bcm2835_thermal_probe(struct
>   		 * For now we deal only with critical, otherwise
>   		 * would need to iterate
>   		 */
> -		err = thermal_zone_get_trip(tz, 0, &trip);
> +		err = thermal_zone_get_crit_temp(tz, &crit_temp);
>   		if (err < 0) {
>   			dev_err(dev, "Not able to read trip_temp: %d\n", err);
>   			return err;
> @@ -232,7 +231,7 @@ static int bcm2835_thermal_probe(struct
>   		val |= (0xFE << BCM2835_TS_TSENSCTL_RSTDELAY_SHIFT);
>   
>   		/*  trip_adc value from info */
> -		val |= bcm2835_thermal_temp2adc(trip.temperature,
> +		val |= bcm2835_thermal_temp2adc(crit_temp,
>   						offset,
>   						slope)
>   			<< BCM2835_TS_TSENSCTL_THOLD_SHIFT;
> 
> 
> 


Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>

Re: [RESEND][PATCH v1 1/8] thermal: broadcom: Use thermal_zone_get_crit_temp() in bcm2835_thermal_probe()

Posted by Florian Fainelli 1 year, 6 months ago

On 7/29/24 08:53, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> 
> Modify the bcm2835 thermal driver to use thermal_zone_get_crit_temp() in
> bcm2835_thermal_probe() instead of relying on the assumption that the
> critical trip index will always be 0.
> 
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian