In the GRC dump path, "len" count of dword-sized registers are read into
the previously-allocated GRC dump buffer.

However, the amount of data written into the GRC dump buffer is never
checked against the length of the dump buffer. This can result in
writing past the end of the dump buffer's kmalloc and a kernel panic.

Resolve this by clamping the amount of data written to the length of the
dump buffer, avoiding the out-of-bounds memory access and panic.

Fixes: d52c89f120de8 ("qed*: Utilize FW 8.37.2.0")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
---
 drivers/net/ethernet/qlogic/qed/qed_debug.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_debug.c b/drivers/net/ethernet/qlogic/qed/qed_debug.c
index 9c3d3dd2f84753100d3c639505677bd53e3ca543..2e88fd79a02e220fc05caa8c27bb7d41b4b37c0d 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_debug.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_debug.c
@@ -2085,6 +2085,13 @@ static u32 qed_grc_dump_addr_range(struct qed_hwfn *p_hwfn,
 		dev_data->pretend.split_id = split_id;
 	}
 
+	/* Ensure we don't write past the end of the GRC buffer */
+	u32 buf_size_bytes = p_hwfn->cdev->dbg_features[DBG_FEATURE_GRC].buf_size;
+	u32 len_bytes = len * sizeof(u32);
+
+	if (len_bytes > buf_size_bytes)
+		len = buf_size_bytes / sizeof(u32);
+
 	/* Read registers using GRC */
 	qed_read_regs(p_hwfn, p_ptt, dump_buf, addr, len);
 
-- 
2.39.5

On Fri, 15 Aug 2025 14:17:25 +1000 Jamie Bainbridge wrote:
> In the GRC dump path, "len" count of dword-sized registers are read into
> the previously-allocated GRC dump buffer.

How did you find the issue? Did you happen to have a stack trace?
It'd be great to know the call trace cause the code is hard to make
sense of.

> However, the amount of data written into the GRC dump buffer is never
> checked against the length of the dump buffer. This can result in
> writing past the end of the dump buffer's kmalloc and a kernel panic.

I could be misreading but it sounds to me like you're trying to protect
against overflow on dump_buf, while the code is protecting against going
over the "feature" buf_size.

> Resolve this by clamping the amount of data written to the length of the
> dump buffer, avoiding the out-of-bounds memory access and panic.
> 
> Fixes: d52c89f120de8 ("qed*: Utilize FW 8.37.2.0")
> Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
> ---
>  drivers/net/ethernet/qlogic/qed/qed_debug.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/net/ethernet/qlogic/qed/qed_debug.c b/drivers/net/ethernet/qlogic/qed/qed_debug.c
> index 9c3d3dd2f84753100d3c639505677bd53e3ca543..2e88fd79a02e220fc05caa8c27bb7d41b4b37c0d 100644
> --- a/drivers/net/ethernet/qlogic/qed/qed_debug.c
> +++ b/drivers/net/ethernet/qlogic/qed/qed_debug.c
> @@ -2085,6 +2085,13 @@ static u32 qed_grc_dump_addr_range(struct qed_hwfn *p_hwfn,
>  		dev_data->pretend.split_id = split_id;
>  	}
>  
> +	/* Ensure we don't write past the end of the GRC buffer */
> +	u32 buf_size_bytes = p_hwfn->cdev->dbg_features[DBG_FEATURE_GRC].buf_size;
> +	u32 len_bytes = len * sizeof(u32);

Please don't mix code with variable declarations.

> +	if (len_bytes > buf_size_bytes)
> +		len = buf_size_bytes / sizeof(u32);

The way it's written it seems to be protecting from buffer being too
big for the feature. In which case you must take addr into account
and make sure dump_buf was zeroed.
-- 
pw-bot: cr

On Wed, 20 Aug 2025 at 10:47, Jakub Kicinski <kuba@kernel.org> wrote:
>
> On Fri, 15 Aug 2025 14:17:25 +1000 Jamie Bainbridge wrote:
> > In the GRC dump path, "len" count of dword-sized registers are read into
> > the previously-allocated GRC dump buffer.
>
> How did you find the issue? Did you happen to have a stack trace?
> It'd be great to know the call trace cause the code is hard to make
> sense of.

We have a customer vmcore and a private Jira Issue with Marvell.
I can submit a v2 with a panic backtrace. However...

> > However, the amount of data written into the GRC dump buffer is never
> > checked against the length of the dump buffer. This can result in
> > writing past the end of the dump buffer's kmalloc and a kernel panic.
>
> I could be misreading but it sounds to me like you're trying to protect
> against overflow on dump_buf, while the code is protecting against going
> over the "feature" buf_size.

I double-checked based on your comment and I have selected the wrong
buffer in the array.

Like you said, it's not easy to follow.

I will resubmit this if possible.

Please disregard this patch for now. Sorry for the bother and thank
you for your review!

Jamie

> > Resolve this by clamping the amount of data written to the length of the
> > dump buffer, avoiding the out-of-bounds memory access and panic.
> >
> > Fixes: d52c89f120de8 ("qed*: Utilize FW 8.37.2.0")
> > Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
> > ---
> >  drivers/net/ethernet/qlogic/qed/qed_debug.c | 7 +++++++
> >  1 file changed, 7 insertions(+)
> >
> > diff --git a/drivers/net/ethernet/qlogic/qed/qed_debug.c b/drivers/net/ethernet/qlogic/qed/qed_debug.c
> > index 9c3d3dd2f84753100d3c639505677bd53e3ca543..2e88fd79a02e220fc05caa8c27bb7d41b4b37c0d 100644
> > --- a/drivers/net/ethernet/qlogic/qed/qed_debug.c
> > +++ b/drivers/net/ethernet/qlogic/qed/qed_debug.c
> > @@ -2085,6 +2085,13 @@ static u32 qed_grc_dump_addr_range(struct qed_hwfn *p_hwfn,
> >               dev_data->pretend.split_id = split_id;
> >       }
> >
> > +     /* Ensure we don't write past the end of the GRC buffer */
> > +     u32 buf_size_bytes = p_hwfn->cdev->dbg_features[DBG_FEATURE_GRC].buf_size;
> > +     u32 len_bytes = len * sizeof(u32);
>
> Please don't mix code with variable declarations.
>
> > +     if (len_bytes > buf_size_bytes)
> > +             len = buf_size_bytes / sizeof(u32);
>
> The way it's written it seems to be protecting from buffer being too
> big for the feature. In which case you must take addr into account
> and make sure dump_buf was zeroed.
> --
> pw-bot: cr