From: Carlos Casadiego <cdcp206@gmail.com>

The software reset is required to bring the device into a known
state before reading the chip ID.

Check the return value of regmap_write() and abort initialization if
the reset command cannot be written.

Fixes: 1c500840934a ("iio: accel: bmc150: reset chip at init time")

Signed-off-by: Carlos Casadiego <cdcp206@gmail.com>
---
 drivers/iio/accel/bmc150-accel-core.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c
index 46bb36d9366e..43a39e1ccce5 100644
--- a/drivers/iio/accel/bmc150-accel-core.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -1561,8 +1561,12 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data)
 	 * Reset chip to get it in a known good state. A delay of 1.8ms after
 	 * reset is required according to the data sheets of supported chips.
 	 */
-	regmap_write(data->regmap, BMC150_ACCEL_REG_RESET,
-		     BMC150_ACCEL_RESET_VAL);
+	ret = regmap_write(data->regmap, BMC150_ACCEL_REG_RESET,
+			   BMC150_ACCEL_RESET_VAL);
+	if (ret < 0) {
+		dev_err(dev, "Error writing reset register\n");
+		return ret;
+	}
 	usleep_range(1800, 2500);
 
 	ret = regmap_read(data->regmap, BMC150_ACCEL_REG_CHIP_ID, &val);

---
base-commit: d8c0f48f0b1583308a98401c0c7b1a65d1d43a6c
change-id: 20260923-iio-bmc150-check-reset-error-389b096b0ad4

Best regards,
--  
Carlos Casadiego <cdcp206@gmail.com>

On Wed, 2026-09-23 at 11:41 -0500, Carlos Casadiego via B4 Relay wrote:
> From: Carlos Casadiego <cdcp206@gmail.com>
> 
> The software reset is required to bring the device into a known
> state before reading the chip ID.
> 
> Check the return value of regmap_write() and abort initialization if
> the reset command cannot be written.
> 
> Fixes: 1c500840934a ("iio: accel: bmc150: reset chip at init time")
> 
> Signed-off-by: Carlos Casadiego <cdcp206@gmail.com>

Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

> ---
>  drivers/iio/accel/bmc150-accel-core.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iio/accel/bmc150-accel-core.c
> b/drivers/iio/accel/bmc150-accel-core.c
> index 46bb36d9366e..43a39e1ccce5 100644
> --- a/drivers/iio/accel/bmc150-accel-core.c
> +++ b/drivers/iio/accel/bmc150-accel-core.c
> @@ -1561,8 +1561,12 @@ static int bmc150_accel_chip_init(struct
> bmc150_accel_data *data)
>  	 * Reset chip to get it in a known good state. A delay of
> 1.8ms after
>  	 * reset is required according to the data sheets of
> supported chips.
>  	 */
> -	regmap_write(data->regmap, BMC150_ACCEL_REG_RESET,
> -		     BMC150_ACCEL_RESET_VAL);
> +	ret = regmap_write(data->regmap, BMC150_ACCEL_REG_RESET,
> +			   BMC150_ACCEL_RESET_VAL);
> +	if (ret < 0) {
> +		dev_err(dev, "Error writing reset register\n");
> +		return ret;
> +	}
>  	usleep_range(1800, 2500);
>  
>  	ret = regmap_read(data->regmap, BMC150_ACCEL_REG_CHIP_ID,
> &val);
> 
> ---
> base-commit: d8c0f48f0b1583308a98401c0c7b1a65d1d43a6c
> change-id: 20260923-iio-bmc150-check-reset-error-389b096b0ad4
> 
> Best regards,
> --  
> Carlos Casadiego <cdcp206@gmail.com>
>