fs/ntfs/attrib.c | 11 +++++++++++ fs/ntfs/inode.c | 2 ++ fs/ntfs/volume.h | 3 +++ 3 files changed, 16 insertions(+)
Mounting a crafted image hangs the mount process forever: no output, no
progress, unkillable, 0% CPU. Nothing is reported, because the task is
not blocked on any lock lockdep tracks. With PROVE_LOCKING and
DEBUG_MUTEXES on it stays silent, and only the hung-task detector
notices:
INFO: task mount:74 blocked in I/O wait for more than 30 seconds.
locks held by mount/74: 1
#0: (&type->s_umount_key#26/1) at sget_fc
It is a folio lock, which lockdep does not track:
folio_wait_bit_common <- waits forever
filemap_read_folio
map_mft_record_folio
map_mft_record
ntfs_map_runlist_nolock
ntfs_attr_vcn_to_rl
__ntfs_read_iomap_begin
iomap_read_folio
ntfs_read_folio <- already holds that folio's lock
ntfs_read_inode_mount
ntfs_fill_super
ntfs_read_inode_mount() builds the first extent of $MFT/$DATA by hand
and then calls ntfs_read_locked_inode() to pick up $MFT's remaining
attributes. The comment there says what that assumes:
* ... we would hope that we don't need
* further extents in order to find the other
* attributes belonging to $MFT. ... But lets
* hope this never happens...
An image whose $MFT attribute list puts those attributes in one of
$MFT's own extent records makes it false. Mapping that extent record
reads $MFT at a vcn the half-built runlist does not cover, so the read
comes back into ntfs_map_runlist_nolock() for $MFT while it already
holds the lock on the folio it then waits for.
So check it. Mark the volume while the bootstrap is assembling $MFT's
runlist, and refuse to map $MFT's runlist through the general path
while that mark is set. The bootstrap builds the runlist itself with
ntfs_mapping_pairs_decompress() and never goes through the guarded
path, so only the re-entrant case is rejected.
The mount now fails instead of hanging:
ntfs: (device vda): ntfs_map_runlist_nolock(): $MFT needs its own
extent records to describe itself. $MFT is corrupt. Run chkdsk.
ntfs: (device vda): ntfs_read_inode_mount(): ntfs_read_inode() of
$MFT failed.
The guard bails before the function touches anything: no search
context, no mapped record, no lock taken. -EIO is not a new return
value here either, and all six call sites already handle a negative
one. ntfs_map_runlist() and ntfs_empty_logfile() propagate it,
ntfs_attr_vcn_to_lcn_nolock() maps it to LCN_EIO,
ntfs_attr_find_vcn_nolock() passes it through, and
ntfs_attr_vcn_to_rl() and ntfs_write_simple_iomap_begin_non_resident()
only act on success, falling through to the unmapped-runlist handling
they already have.
Found by fuzzing mountable images. Checked under qemu with KASAN,
PROVE_LOCKING and the hung-task detector: two crafted images hang an
unpatched kernel and are rejected by a patched one, and eight
well-formed images mount on both.
Fixes: b041ca562526 ("ntfs: update iomap and address space operations")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Goergens <matthias.goergens@gmail.com>
---
The two crafted images are 28 KB each; happy to send them or put them
somewhere fetchable.
fs/ntfs3 rejects both while loading $Volume, so it is not affected by
these images, but I did not try fuzzing its parser.
fs/ntfs/attrib.c | 11 +++++++++++
fs/ntfs/inode.c | 2 ++
fs/ntfs/volume.h | 3 +++
3 files changed, 16 insertions(+)
diff --git a/fs/ntfs/attrib.c b/fs/ntfs/attrib.c
index c949ff765075..f94e928f145f 100644
--- a/fs/ntfs/attrib.c
+++ b/fs/ntfs/attrib.c
@@ -103,6 +103,17 @@ int ntfs_map_runlist_nolock(struct ntfs_inode *ni, s64 vcn, struct ntfs_attr_sea
base_ni = ni;
else
base_ni = ni->ext.base_ntfs_ino;
+ /*
+ * ntfs_read_inode_mount() builds $MFT's runlist itself, so nothing
+ * should reach here for $MFT. A crafted image can: the read that
+ * gets here already holds the $MFT folio lock it would wait on.
+ */
+ if (unlikely(NVolMftBootstrap(ni->vol) &&
+ base_ni == NTFS_I(ni->vol->mft_ino))) {
+ ntfs_error(ni->vol->sb,
+ "$MFT needs its own extent records to describe itself. $MFT is corrupt. Run chkdsk.");
+ return -EIO;
+ }
if (!ctx) {
ctx_is_temporary = ctx_needs_reset = true;
m = map_mft_record(base_ni);
diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c
index a777de8a80c7..55f6d3334238 100644
--- a/fs/ntfs/inode.c
+++ b/fs/ntfs/inode.c
@@ -2150,7 +2150,9 @@ int ntfs_read_inode_mount(struct inode *vi)
* ntfs_read_inode() on extents of $MFT/$DATA. But lets
* hope this never happens...
*/
+ NVolSetMftBootstrap(vol);
err = ntfs_read_locked_inode(vi);
+ NVolClearMftBootstrap(vol);
if (err) {
ntfs_error(sb, "ntfs_read_inode() of $MFT failed.\n");
ntfs_attr_put_search_ctx(ctx);
diff --git a/fs/ntfs/volume.h b/fs/ntfs/volume.h
index bc85a9592245..f9ecbbe205ad 100644
--- a/fs/ntfs/volume.h
+++ b/fs/ntfs/volume.h
@@ -184,6 +184,7 @@ struct ntfs_volume {
* NV_Discard Issue discard/TRIM commands for freed clusters.
* NV_DisableSparse Disable creation of sparse regions.
* NV_NativeSymlinkRel Translate absolute Windows reparse targets (native_symlink=rel).
+ * NV_MftBootstrap Mount is still assembling $MFT's own runlist.
*/
enum {
NV_Errors,
@@ -203,6 +204,7 @@ enum {
NV_DisableSparse,
NV_NativeSymlinkRel,
NV_SymlinkNative,
+ NV_MftBootstrap,
};
/*
@@ -241,6 +243,7 @@ DEFINE_NVOL_BIT_OPS(Discard)
DEFINE_NVOL_BIT_OPS(DisableSparse)
DEFINE_NVOL_BIT_OPS(NativeSymlinkRel)
DEFINE_NVOL_BIT_OPS(SymlinkNative)
+DEFINE_NVOL_BIT_OPS(MftBootstrap)
static inline void ntfs_inc_free_clusters(struct ntfs_volume *vol, s64 nr)
{
base-commit: 40288c9206c17eb66a603262e06a58d300d0f279
--
2.55.0
Hi Matthias,
On Tue, Sep 22, 2026 at 11:39:31PM +0800, Matthias Goergens wrote:
> Mounting a crafted image hangs the mount process forever: no output, no
> progress, unkillable, 0% CPU. Nothing is reported, because the task is
> not blocked on any lock lockdep tracks. With PROVE_LOCKING and
> DEBUG_MUTEXES on it stays silent, and only the hung-task detector
> notices:
>
> INFO: task mount:74 blocked in I/O wait for more than 30 seconds.
> locks held by mount/74: 1
> #0: (&type->s_umount_key#26/1) at sget_fc
>
> It is a folio lock, which lockdep does not track:
>
> folio_wait_bit_common <- waits forever
> filemap_read_folio
> map_mft_record_folio
> map_mft_record
> ntfs_map_runlist_nolock
> ntfs_attr_vcn_to_rl
> __ntfs_read_iomap_begin
> iomap_read_folio
> ntfs_read_folio <- already holds that folio's lock
> ntfs_read_inode_mount
> ntfs_fill_super
>
> ntfs_read_inode_mount() builds the first extent of $MFT/$DATA by hand
> and then calls ntfs_read_locked_inode() to pick up $MFT's remaining
> attributes. The comment there says what that assumes:
>
> * ... we would hope that we don't need
> * further extents in order to find the other
> * attributes belonging to $MFT. ... But lets
> * hope this never happens...
>
> An image whose $MFT attribute list puts those attributes in one of
> $MFT's own extent records makes it false. Mapping that extent record
> reads $MFT at a vcn the half-built runlist does not cover, so the read
> comes back into ntfs_map_runlist_nolock() for $MFT while it already
> holds the lock on the folio it then waits for.
>
> So check it. Mark the volume while the bootstrap is assembling $MFT's
> runlist, and refuse to map $MFT's runlist through the general path
> while that mark is set. The bootstrap builds the runlist itself with
> ntfs_mapping_pairs_decompress() and never goes through the guarded
> path, so only the re-entrant case is rejected.
>
> The mount now fails instead of hanging:
>
> ntfs: (device vda): ntfs_map_runlist_nolock(): $MFT needs its own
> extent records to describe itself. $MFT is corrupt. Run chkdsk.
> ntfs: (device vda): ntfs_read_inode_mount(): ntfs_read_inode() of
> $MFT failed.
>
> The guard bails before the function touches anything: no search
> context, no mapped record, no lock taken. -EIO is not a new return
> value here either, and all six call sites already handle a negative
> one. ntfs_map_runlist() and ntfs_empty_logfile() propagate it,
> ntfs_attr_vcn_to_lcn_nolock() maps it to LCN_EIO,
> ntfs_attr_find_vcn_nolock() passes it through, and
> ntfs_attr_vcn_to_rl() and ntfs_write_simple_iomap_begin_non_resident()
> only act on success, falling through to the unmapped-runlist handling
> they already have.
>
> Found by fuzzing mountable images. Checked under qemu with KASAN,
> PROVE_LOCKING and the hung-task detector: two crafted images hang an
> unpatched kernel and are rejected by a patched one, and eight
> well-formed images mount on both.
>
> Fixes: b041ca562526 ("ntfs: update iomap and address space operations")
> Cc: stable@vger.kernel.org
> Signed-off-by: Matthias Goergens <matthias.goergens@gmail.com>
> ---
> The two crafted images are 28 KB each; happy to send them or put them
> somewhere fetchable.
>
> fs/ntfs3 rejects both while loading $Volume, so it is not affected by
> these images, but I did not try fuzzing its parser.
>
> fs/ntfs/attrib.c | 11 +++++++++++
> fs/ntfs/inode.c | 2 ++
> fs/ntfs/volume.h | 3 +++
> 3 files changed, 16 insertions(+)
>
> diff --git a/fs/ntfs/attrib.c b/fs/ntfs/attrib.c
> index c949ff765075..f94e928f145f 100644
> --- a/fs/ntfs/attrib.c
> +++ b/fs/ntfs/attrib.c
> @@ -103,6 +103,17 @@ int ntfs_map_runlist_nolock(struct ntfs_inode *ni, s64 vcn, struct ntfs_attr_sea
> base_ni = ni;
> else
> base_ni = ni->ext.base_ntfs_ino;
> + /*
> + * ntfs_read_inode_mount() builds $MFT's runlist itself, so nothing
> + * should reach here for $MFT. A crafted image can: the read that
> + * gets here already holds the $MFT folio lock it would wait on.
> + */
> + if (unlikely(NVolMftBootstrap(ni->vol) &&
> + base_ni == NTFS_I(ni->vol->mft_ino))) {
> + ntfs_error(ni->vol->sb,
> + "$MFT needs its own extent records to describe itself. $MFT is corrupt. Run chkdsk.");
> + return -EIO;
> + }
> if (!ctx) {
> ctx_is_temporary = ctx_needs_reset = true;
> m = map_mft_record(base_ni);
> diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c
> index a777de8a80c7..55f6d3334238 100644
> --- a/fs/ntfs/inode.c
> +++ b/fs/ntfs/inode.c
> @@ -2150,7 +2150,9 @@ int ntfs_read_inode_mount(struct inode *vi)
> * ntfs_read_inode() on extents of $MFT/$DATA. But lets
> * hope this never happens...
> */
> + NVolSetMftBootstrap(vol);
> err = ntfs_read_locked_inode(vi);
> + NVolClearMftBootstrap(vol);
The scope of the bootstrp flag seems to be too narrow.
The outer loop continues to call ntfs_attr_lookup() until all $DATA
extents are enumerated. ntfs_attr_lookup() can call map_mft_record()
also, when mapping pairs is stored in another MFT record. So the same
folio deadlock can occur.
I think that NVolMftBootstrap should remain set until all $DATA
extent enumeration has completed.
> if (err) {
> ntfs_error(sb, "ntfs_read_inode() of $MFT failed.\n");
> ntfs_attr_put_search_ctx(ctx);
> diff --git a/fs/ntfs/volume.h b/fs/ntfs/volume.h
> index bc85a9592245..f9ecbbe205ad 100644
> --- a/fs/ntfs/volume.h
> +++ b/fs/ntfs/volume.h
> @@ -184,6 +184,7 @@ struct ntfs_volume {
> * NV_Discard Issue discard/TRIM commands for freed clusters.
> * NV_DisableSparse Disable creation of sparse regions.
> * NV_NativeSymlinkRel Translate absolute Windows reparse targets (native_symlink=rel).
> + * NV_MftBootstrap Mount is still assembling $MFT's own runlist.
> */
> enum {
> NV_Errors,
> @@ -203,6 +204,7 @@ enum {
> NV_DisableSparse,
> NV_NativeSymlinkRel,
> NV_SymlinkNative,
> + NV_MftBootstrap,
> };
>
> /*
> @@ -241,6 +243,7 @@ DEFINE_NVOL_BIT_OPS(Discard)
> DEFINE_NVOL_BIT_OPS(DisableSparse)
> DEFINE_NVOL_BIT_OPS(NativeSymlinkRel)
> DEFINE_NVOL_BIT_OPS(SymlinkNative)
> +DEFINE_NVOL_BIT_OPS(MftBootstrap)
>
> static inline void ntfs_inc_free_clusters(struct ntfs_volume *vol, s64 nr)
> {
>
> base-commit: 40288c9206c17eb66a603262e06a58d300d0f279
> --
> 2.55.0
>
--
Thanks,
Hyunchul
© 2016 - 2026 Red Hat, Inc.