In virtblk_add_req(), each request consumes 2 extra descriptors (out_hdr
and in_hdr) in addition to the data scatter-gather segments.

When a hypervisor (e.g. QNX Hypervisor) advertises VIRTIO_BLK_F_SEG_MAX
with seg_max = 1024 alongside a 1024-entry split ring (vring.num = 1024)
and VIRTIO_RING_F_INDIRECT_DESC disabled, lim->max_segments is set to
1024. When the block layer submits requests with 1023 or 1024 data
segments, total_sg reaches 1025 or 1026. This exceeds vring.num (1024),
causing virtqueue_add_split() to return -ENOSPC and permanently wedge
the blk-mq queue.

Furthermore, the Virtio specification (2.7.5.3.1) requires that a
descriptor chain never exceed the Queue Size, and virtqueue_add_split()
falls back to direct descriptors if indirect table allocation fails.

Fix this by:
1. Rejecting queues with ring_size < 3 at probe, or
   ring_size < (queue_max_segments + 2) during resume/reset recovery in
   init_vq().
2. Unconditionally clamping sg_elems to (ring_size - 2) across all
   virtqueues in virtblk_read_limits().

Fixes: 0864b79a1533 ("virtio: block: dynamic maximum segments")
Signed-off-by: Sergii Ushakov <sergiiushakov@google.com>
---
Changes in v4:
- Add Fixes tag.
- Add code comments in init_vq() documenting the constants 3 and + 2.

 drivers/block/virtio_blk.c | 44 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 43 insertions(+), 1 deletion(-)

diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 32bf3ba07a9d..cafca309b4d0 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -1021,6 +1021,30 @@ static int init_vq(struct virtio_blk *vblk)
 		goto out;
 
 	for (i = 0; i < num_vqs; i++) {
+		unsigned int ring_size = virtqueue_get_vring_size(vqs[i]);
+		/*
+		 * Each request consumes 2 extra descriptors (out_hdr and
+		 * in_hdr) in addition to the data segments.
+		 *
+		 * At initial probe (!vblk->disk), each virtqueue must fit at
+		 * least 1 data segment + 2 header descriptors (3).
+		 * On resume/recovery (vblk->disk), each virtqueue must fit the
+		 * existing queue_max_segments() + 2 header descriptors.
+		 */
+		unsigned int min_ring_size = 3;
+
+		if (vblk->disk)
+			min_ring_size = queue_max_segments(vblk->disk->queue) + 2;
+
+		if (ring_size < min_ring_size) {
+			dev_err(&vdev->dev,
+				"virtqueue %u ring size %u is smaller than minimum %u\n",
+				i, ring_size, min_ring_size);
+			vdev->config->del_vqs(vdev);
+			err = -EINVAL;
+			goto out;
+		}
+
 		spin_lock_init(&vblk->vqs[i].lock);
 		vblk->vqs[i].vq = vqs[i];
 	}
@@ -1253,7 +1277,7 @@ static int virtblk_read_limits(struct virtio_blk *vblk,
 	u16 min_io_size;
 	u8 physical_block_exp, alignment_offset;
 	size_t max_dma_size;
-	int err;
+	int err, i;
 
 	/* We need to know how many segments before we allocate. */
 	err = virtio_cread_feature(vdev, VIRTIO_BLK_F_SEG_MAX,
@@ -1267,6 +1291,23 @@ static int virtblk_read_limits(struct virtio_blk *vblk,
 	/* Prevent integer overflows and honor max vq size */
 	sg_elems = min_t(u32, sg_elems, VIRTIO_BLK_MAX_SG_ELEMS - 2);
 
+	/*
+	 * virtblk_add_req() uses separate outgoing and incoming header
+	 * descriptors (out_hdr and in_hdr), consuming 2 extra descriptors
+	 * per request in addition to the data segments.
+	 *
+	 * Per virtio specification (2.7.5.3.1), a driver MUST NOT create a
+	 * descriptor chain longer than the Queue Size of the device.
+	 *
+	 * Clamp max_segments to (ring_size - 2) across all virtqueues so
+	 * that a request never exceeds the ring size of any queue.
+	 */
+	for (i = 0; i < vblk->num_vqs; i++) {
+		u32 ring_size = virtqueue_get_vring_size(vblk->vqs[i].vq);
+
+		sg_elems = min_t(u32, sg_elems, ring_size - 2);
+	}
+
 	/* We can handle whatever the host told us to handle. */
 	lim->max_segments = sg_elems;
 
@@ -1466,6 +1507,7 @@ static int virtblk_probe(struct virtio_device *vdev)
 	mutex_init(&vblk->vdev_mutex);
 
 	vblk->vdev = vdev;
+	vblk->disk = NULL;
 
 	INIT_WORK(&vblk->config_work, virtblk_config_changed_work);
 
-- 
2.55.0.1082.g2b9226bbc0-goog