arch/riscv/Kconfig.errata | 11 +++++++++ arch/riscv/errata/mips/errata.c | 17 +++++++++++++ arch/riscv/include/asm/errata_list.h | 37 ++++++++++++++++++++++++++++ arch/riscv/include/asm/errata_list_vendors.h | 5 ++-- arch/riscv/include/asm/processor.h | 3 ++- arch/riscv/kernel/head.S | 4 ++- 6 files changed, 73 insertions(+), 4 deletions(-)
From: Djordje Todorovic <djordje.todorovic@htecgroup.com>
The MIPS P8700 has bugs with the WFI instruction. A WFI instruction
after a mispredicted branch can result in erroneous address
translation on the MIPS P8700. MIPS has not published an erratum
for this.
The workaround uses the RISC-V alternatives framework to patch all WFI
instructions with the MIPS P8700 pause opcode (0x00501013)
at runtime when running on P8700 hardware.
Two call sites are patched:
- arch/riscv/kernel/head.S: secondary hart parking loop
- arch/riscv/include/asm/processor.h: wait_for_interrupt()
Signed-off-by: Djordje Todorovic <djordje.todorovic@htecgroup.com>
Signed-off-by: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
---
This patch was tested on QEMU configured with eight P8700 harts,
as well as on the MIPS Boston board, configured with a single P8700 CPU.
Errata application was tested by disassembling with GDB on QEMU
and inserting an illegal instruction on the Boston board.
Correctness was tested with a combination of kselftests
and torture tests (rcu, locktorture), along with coremark testing.
This patch depends on 'riscv: Add support for early boot errata application on
MIPS chips' [1].
Links:
[1] https://lore.kernel.org/linux-riscv/20260810-p8700-early-boot-v1-1-5c4aa08d500f@htecgroup.com/
---
Changes in v3:
- Rebase onto the early boot patch (linked in [1])
- Expand the errata comment with additional information about PAUSE instruction latency.
- Link to v2: https://lore.kernel.org/r/20260608-p8700-wfi-v2-1-77efc7459f3d@htecgroup.com
Changes in v2:
- Replace .insn with .4byte in ALT_WFI macro
- Add explanatory comments
- Link to v1: https://lore.kernel.org/r/20260511-p8700-wfi-v1-1-099b1d10fcf2@htecgroup.com
---
arch/riscv/Kconfig.errata | 11 +++++++++
arch/riscv/errata/mips/errata.c | 17 +++++++++++++
arch/riscv/include/asm/errata_list.h | 37 ++++++++++++++++++++++++++++
arch/riscv/include/asm/errata_list_vendors.h | 5 ++--
arch/riscv/include/asm/processor.h | 3 ++-
arch/riscv/kernel/head.S | 4 ++-
6 files changed, 73 insertions(+), 4 deletions(-)
diff --git a/arch/riscv/Kconfig.errata b/arch/riscv/Kconfig.errata
index 45f3a4a7c9e234e1dc95ff4595a91922ce6176d1..7e7f784a6194bc3c4cdab5fde559e4f37f784dc2 100644
--- a/arch/riscv/Kconfig.errata
+++ b/arch/riscv/Kconfig.errata
@@ -45,6 +45,17 @@ config ERRATA_MIPS_P8700_PAUSE_OPCODE
If you are not using the P8700 processor, say n.
+config ERRATA_MIPS_P8700_WFI
+ bool "Replace WFI with mips.pause for MIPS P8700"
+ depends on ERRATA_MIPS && 64BIT
+ default n
+ help
+ The RISCV MIPS P8700 has bugs with the WFI instruction.
+ This errata replaces all WFI instructions with the MIPS
+ P8700 pause opcode to avoid these issues.
+
+ If you are not using the P8700 processor, say n.
+
config ERRATA_SIFIVE
bool "SiFive errata"
depends on RISCV_ALTERNATIVE
diff --git a/arch/riscv/errata/mips/errata.c b/arch/riscv/errata/mips/errata.c
index ac9a12d0a30c9d2bf5d4920d5f6e9d2ed22fe0e5..6e715552745011d0b719d78199290490e19d6d2f 100644
--- a/arch/riscv/errata/mips/errata.c
+++ b/arch/riscv/errata/mips/errata.c
@@ -27,6 +27,20 @@ static inline bool errata_probe_pause(unsigned int stage)
return true;
}
+static inline bool errata_probe_wfi(unsigned int stage)
+{
+ if (!IS_ENABLED(CONFIG_ERRATA_MIPS_P8700_WFI))
+ return false;
+
+ if (!riscv_isa_vendor_extension_available(MIPS_VENDOR_ID, XMIPSEXECTL))
+ return false;
+
+ if (stage == RISCV_ALTERNATIVES_EARLY_BOOT)
+ return false;
+
+ return true;
+}
+
static u32 mips_errata_probe(unsigned int stage)
{
u32 cpu_req_errata = 0;
@@ -34,6 +48,9 @@ static u32 mips_errata_probe(unsigned int stage)
if (errata_probe_pause(stage))
cpu_req_errata |= BIT(ERRATA_MIPS_P8700_PAUSE_OPCODE);
+ if (errata_probe_wfi(stage))
+ cpu_req_errata |= BIT(ERRATA_MIPS_P8700_WFI);
+
return cpu_req_errata;
}
diff --git a/arch/riscv/include/asm/errata_list.h b/arch/riscv/include/asm/errata_list.h
index 6694b5ccdcf85cfe7e767ea4de981b34f2b17b04..6fdb445c0f45430e5bdd9a8e1382c6f63efe6323 100644
--- a/arch/riscv/include/asm/errata_list.h
+++ b/arch/riscv/include/asm/errata_list.h
@@ -25,6 +25,16 @@ ALTERNATIVE(__stringify(RISCV_PTR do_page_fault), \
__stringify(RISCV_PTR sifive_cip_453_page_fault_trp), \
SIFIVE_VENDOR_ID, ERRATA_SIFIVE_CIP_453, \
CONFIG_ERRATA_SIFIVE_CIP_453)
+
+#ifdef CONFIG_ERRATA_MIPS_P8700_WFI
+#define ALT_WFI \
+ALTERNATIVE("wfi; .rept 7; nop; .endr;", \
+ ".rept 8; .4byte 0x00501013; .endr;", MIPS_VENDOR_ID, \
+ ERRATA_MIPS_P8700_WFI, CONFIG_ERRATA_MIPS_P8700_WFI)
+#else
+#define ALT_WFI wfi
+#endif
+
#else /* !__ASSEMBLER__ */
#define ALT_SFENCE_VMA_ASID(asid) \
@@ -53,6 +63,33 @@ asm(ALTERNATIVE( \
: /* no inputs */ \
: "memory")
+#ifdef CONFIG_ERRATA_MIPS_P8700_WFI
+/*
+ * A WFI instruction after a mispredicted branch can result in erroneous address translation
+ * on the MIPS P8700.
+ * The number of MIPS_PAUSE instructions required was determined by measuring
+ * Coremark performance on a one-core, two-hart configuration. Eight PAUSE instructions matched
+ * the latency of a single WFI instruction.
+ * Usually, the maximum number of cycles per PAUSE instruction is 63. Exceptionally, if the hart's
+ * LR reservation bit is set, the maximum number of cycles is extended to 255
+ * (and the hart is woken up once it is cleared). This case should not affect the patched sites.
+ */
+#define ALT_RISCV_WFI() \
+asm volatile(ALTERNATIVE( \
+ "wfi\n" /* Original RISC-V wfi insn */ \
+ __nops(7), \
+ ".rept 8;" MIPS_PAUSE ".endr;\n", /* Replacement: mips.pause for P8700 */ \
+ MIPS_VENDOR_ID, /* Vendor ID to match */ \
+ ERRATA_MIPS_P8700_WFI, /* patch_id */ \
+ CONFIG_ERRATA_MIPS_P8700_WFI) \
+ : /* no outputs */ \
+ : /* no inputs */ \
+ : "memory")
+#else
+#define ALT_RISCV_WFI() \
+ __asm__ __volatile__ ("wfi")
+#endif
+
/*
* _val is marked as "will be overwritten", so need to set it to 0
* in the default case.
diff --git a/arch/riscv/include/asm/errata_list_vendors.h b/arch/riscv/include/asm/errata_list_vendors.h
index ec7eba3734371a2d8b68fbd4cbd88a8e7135a413..4505317a6b949be602f507547fc9cd495c923e32 100644
--- a/arch/riscv/include/asm/errata_list_vendors.h
+++ b/arch/riscv/include/asm/errata_list_vendors.h
@@ -22,8 +22,9 @@
#endif
#ifdef CONFIG_ERRATA_MIPS
-#define ERRATA_MIPS_P8700_PAUSE_OPCODE 0
-#define ERRATA_MIPS_NUMBER 1
+#define ERRATA_MIPS_P8700_PAUSE_OPCODE 0
+#define ERRATA_MIPS_P8700_WFI 1
+#define ERRATA_MIPS_NUMBER 2
#endif
#endif /* ASM_ERRATA_LIST_VENDORS_H */
diff --git a/arch/riscv/include/asm/processor.h b/arch/riscv/include/asm/processor.h
index 812517b2cec1350f741849c1c56a35027321ef50..c65c2314206d7d958a1e52cd81b18a8142a6e1a8 100644
--- a/arch/riscv/include/asm/processor.h
+++ b/arch/riscv/include/asm/processor.h
@@ -17,6 +17,7 @@
#include <asm/alternative-macros.h>
#include <asm/hwcap.h>
#include <asm/usercfi.h>
+#include <asm/errata_list.h>
#define arch_get_mmap_end(addr, len, flags) \
({ \
@@ -176,7 +177,7 @@ extern unsigned long __get_wchan(struct task_struct *p);
static inline void wait_for_interrupt(void)
{
- __asm__ __volatile__ ("wfi");
+ ALT_RISCV_WFI();
}
extern phys_addr_t dma32_phys_limit;
diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
index f6a8ca49e6277c39b634b3b7d5c248ffa1a0b310..1631fd6bc786b81c9c63e5e38217108ddbde47cd 100644
--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@@ -15,6 +15,8 @@
#include <asm/image.h>
#include <asm/scs.h>
#include <asm/usercfi.h>
+#include <asm/alternative.h>
+#include <asm/errata_list.h>
#include "efi-header.S"
__HEAD
@@ -189,7 +191,7 @@ secondary_start_sbi:
* - receive an early trap, before setup_trap_vector finished
* - fail in smp_callin(), as a successful one wouldn't return
*/
- wfi
+ ALT_WFI
j .Lsecondary_park
.align 2
---
base-commit: c2cd463d6ee7d55a3ec0719d93c49ff99022d58f
change-id: 20260415-p8700-wfi-9083b1d87d22
prerequisite-message-id: <20260810-p8700-early-boot-v1-1-5c4aa08d500f@htecgroup.com>
prerequisite-patch-id: d530f62a25369e72a6ead97617c437b1fca1b276
Best regards,
--
Aleksa Paunovic <aleksa.paunovic@htecgroup.com>© 2016 - 2026 Red Hat, Inc.