pxa_timer_dt_init() obtains the timer clock with of_clk_get() but never
releases the consumer reference: the clk_prepare_enable() failure path,
the irq_of_parse_and_map() failure path and the success path all return
without clk_put(), leaking the reference on each init attempt.

Call clk_put() on all three paths. The clock is left prepared and
enabled, so the timer behaviour is unchanged.

Fixes: ab5354c48d58 ("clocksource: pxa: Add device-tree support for PXA timer")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
---
 drivers/clocksource/timer-pxa.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/clocksource/timer-pxa.c b/drivers/clocksource/timer-pxa.c
index 7ad0e5adb2ff..8bb473b75b48 100644
--- a/drivers/clocksource/timer-pxa.c
+++ b/drivers/clocksource/timer-pxa.c
@@ -195,6 +195,7 @@ static int __init pxa_timer_dt_init(struct device_node *np)
 	ret = clk_prepare_enable(clk);
 	if (ret) {
 		pr_crit("Failed to prepare clock\n");
+		clk_put(clk);
 		return ret;
 	}
 
@@ -202,10 +203,14 @@ static int __init pxa_timer_dt_init(struct device_node *np)
 	irq = irq_of_parse_and_map(np, 0);
 	if (irq <= 0) {
 		pr_crit("%pOFn: unable to parse OS-timer0 irq\n", np);
+		clk_put(clk);
 		return -EINVAL;
 	}
 
-	return pxa_timer_common_init(irq, clk_get_rate(clk));
+	ret = pxa_timer_common_init(irq, clk_get_rate(clk));
+	clk_put(clk);
+
+	return ret;
 }
 TIMER_OF_DECLARE(pxa_timer, "marvell,pxa-timer", pxa_timer_dt_init);
 
-- 
2.34.1