Restructure the probe error labels so each failure only tears down
what was already acquired, and stop calling
usb_phy_generic_unregister() with NULL or an ERR_PTR() on paths
where the phy was never registered.

The old error paths only worked because platform_device_del() and
platform_device_put() ignore NULL and ERR_PTR() arguments.

Signed-off-by: Felix Gu <ustc.gu@gmail.com>
---
 drivers/usb/musb/mpfs.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/musb/mpfs.c b/drivers/usb/musb/mpfs.c
index 587127abd30a..59625ed95656 100644
--- a/drivers/usb/musb/mpfs.c
+++ b/drivers/usb/musb/mpfs.c
@@ -276,13 +276,13 @@ static int mpfs_probe(struct platform_device *pdev)
 	if (IS_ERR(clk)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
 		ret = PTR_ERR(clk);
-		goto err_phy_release;
+		goto err_pdev_put;
 	}
 
 	ret = clk_prepare_enable(clk);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to enable clock\n");
-		goto err_phy_release;
+		goto err_pdev_put;
 	}
 
 	musb_pdev->dev.parent = dev;
@@ -324,29 +324,29 @@ static int mpfs_probe(struct platform_device *pdev)
 	ret = platform_device_add_resources(musb_pdev, pdev->resource, pdev->num_resources);
 	if (ret) {
 		dev_err(dev, "failed to add resources\n");
-		goto err_clk_disable;
+		goto err_phy_release;
 	}
 
 	ret = platform_device_add_data(musb_pdev, pdata, sizeof(*pdata));
 	if (ret) {
 		dev_err(dev, "failed to add platform_data\n");
-		goto err_clk_disable;
+		goto err_phy_release;
 	}
 
 	ret = platform_device_add(musb_pdev);
 	if (ret) {
 		dev_err(dev, "failed to register musb device\n");
-		goto err_clk_disable;
+		goto err_phy_release;
 	}
 
 	dev_info(&pdev->dev, "Registered MPFS MUSB driver\n");
 	return 0;
 
-err_clk_disable:
-	clk_disable_unprepare(clk);
-
 err_phy_release:
 	usb_phy_generic_unregister(glue->phy);
+err_clk_disable:
+	clk_disable_unprepare(clk);
+err_pdev_put:
 	platform_device_put(musb_pdev);
 	return ret;
 }

---
base-commit: 68142f986ff04b2b70b31db00f719bf690f64a9a
change-id: 20260914-mpfs-1-2e062f29128e

Best regards,
--  
Felix Gu <ustc.gu@gmail.com>

On Tue, Sep 15, 2026 at 01:14:08AM +0800, Felix Gu wrote:
> Restructure the probe error labels so each failure only tears down
> what was already acquired, and stop calling
> usb_phy_generic_unregister() with NULL or an ERR_PTR() on paths
> where the phy was never registered.
> 
> The old error paths only worked because platform_device_del() and
> platform_device_put() ignore NULL and ERR_PTR() arguments.
> 
> Signed-off-by: Felix Gu <ustc.gu@gmail.com>
> ---
>  drivers/usb/musb/mpfs.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/usb/musb/mpfs.c b/drivers/usb/musb/mpfs.c
> index 587127abd30a..59625ed95656 100644
> --- a/drivers/usb/musb/mpfs.c
> +++ b/drivers/usb/musb/mpfs.c
> @@ -276,13 +276,13 @@ static int mpfs_probe(struct platform_device *pdev)
>  	if (IS_ERR(clk)) {
>  		dev_err(&pdev->dev, "failed to get clock\n");

Could go a step further if you want, and use devm_clk_get_enabled().

This is clearly the wrong order, so this patch is fine as-is.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.

>  		ret = PTR_ERR(clk);
> -		goto err_phy_release;
> +		goto err_pdev_put;
>  	}
>  
>  	ret = clk_prepare_enable(clk);
>  	if (ret) {
>  		dev_err(&pdev->dev, "failed to enable clock\n");
> -		goto err_phy_release;
> +		goto err_pdev_put;
>  	}
>  
>  	musb_pdev->dev.parent = dev;
> @@ -324,29 +324,29 @@ static int mpfs_probe(struct platform_device *pdev)
>  	ret = platform_device_add_resources(musb_pdev, pdev->resource, pdev->num_resources);
>  	if (ret) {
>  		dev_err(dev, "failed to add resources\n");
> -		goto err_clk_disable;
> +		goto err_phy_release;
>  	}
>  
>  	ret = platform_device_add_data(musb_pdev, pdata, sizeof(*pdata));
>  	if (ret) {
>  		dev_err(dev, "failed to add platform_data\n");
> -		goto err_clk_disable;
> +		goto err_phy_release;
>  	}
>  
>  	ret = platform_device_add(musb_pdev);
>  	if (ret) {
>  		dev_err(dev, "failed to register musb device\n");
> -		goto err_clk_disable;
> +		goto err_phy_release;
>  	}
>  
>  	dev_info(&pdev->dev, "Registered MPFS MUSB driver\n");
>  	return 0;
>  
> -err_clk_disable:
> -	clk_disable_unprepare(clk);
> -
>  err_phy_release:
>  	usb_phy_generic_unregister(glue->phy);
> +err_clk_disable:
> +	clk_disable_unprepare(clk);
> +err_pdev_put:
>  	platform_device_put(musb_pdev);
>  	return ret;
>  }
> 
> ---
> base-commit: 68142f986ff04b2b70b31db00f719bf690f64a9a
> change-id: 20260914-mpfs-1-2e062f29128e
> 
> Best regards,
> --  
> Felix Gu <ustc.gu@gmail.com>
>