From: Francesco Dolcini <francesco.dolcini@toradex.com>

This series adds support for the Thine THC63LVD827 DPI to LVDS encoder and
afterward uses it to add a DT overlay to enable the Toradex 10inch LVDS panel
on Colibri iMX7 / Iris

Francesco Dolcini (3):
  dt-bindings: display: bridge: Add THine THC63LVD827
  drm/bridge: Add THine THC63LVD827 LVDS encoder
  ARM: dts: imx7d-colibri-emmc: Add Toradex Capacitive Touch Display 10"
    LVDS

 .../display/bridge/thine,thc63lvd827.yaml     | 126 ++++++++++++
 MAINTAINERS                                   |   6 +
 arch/arm/boot/dts/nxp/imx/Makefile            |   6 +
 ...emmc-iris-panel-cap-touch-10inch-lvds.dtso |  92 +++++++++
 drivers/gpu/drm/bridge/Kconfig                |  11 +
 drivers/gpu/drm/bridge/Makefile               |   1 +
 drivers/gpu/drm/bridge/thc63lvd827.c          | 193 ++++++++++++++++++
 7 files changed, 435 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd827.yaml
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-iris-panel-cap-touch-10inch-lvds.dtso
 create mode 100644 drivers/gpu/drm/bridge/thc63lvd827.c

-- 
2.47.3

Hello,
just a gentle ping on this.

On Tue, Sep 08, 2026 at 12:02:24PM +0200, Francesco Dolcini wrote:
> From: Francesco Dolcini <francesco.dolcini@toradex.com>
> 
> This series adds support for the Thine THC63LVD827 DPI to LVDS encoder and
> afterward uses it to add a DT overlay to enable the Toradex 10inch LVDS panel
> on Colibri iMX7 / Iris

I did not get any feedback on the binding (apart a small comment from
Frank -> thanks!) and zero feedback on the driver. Maybe some DT and DRM
bridge people can have a look?

Thanks a lot, appreciated.

Francesco