Hello,
This patch series adds support for the ABX81X RTCs, which are essentially
SPI versions of the ABX80X RTCs. The first patches (P2-P4) contain bug fixes 
(added after sashiko's review in v1-v5), then (P5-P8) we have some cleanup and
reorganization changes (converting the driver to use the regmap API was
needed for this), followed by the actual ABX81X support.

Kind regards,
Antoni Pokusinski

---
Changes since v5:
* PATCH 2 ("rtc: abx80x: fix error check after i2c_smbus_read in read_alarm()")
  Handle the case of 0<=err<7
* PATCH 4 ("rtc: abx80x: properly handle shared IRQs")
  - probe: added missing configuration key unlock before writing REG_OSC
  - handle_irq: fixed the value being written to REG_STATUS
* PATCH 6 ("rtc: abx80x: use regmap instead of I2C specific API")
  Changed the type of "flag" argument of "regmap_read()" from "int" to
  "unsigned int" in "set_time()"
Changes since v4:
  None
Changes since v3:
* PATCH 2 ("rtc: abx80x: fix error check after i2c_smbus_read in read_alarm()")
  New patch
* PATCH 3 ("rtc: abx80x: add mutex protection for register writes")
  Replaced "guard()" with "scoped_guard()" in "abx80x_ioctl()"
* PATCH 4 ("rtc: abx80x: properly handle shared IRQs")
  Disable all the unused interrupts in "probe()"
* PATCH 6 ("rtc: abx80x: use regmap instead of I2C specific API")
  Changed the type of "flag" arguments in "regmap_read()" from "int" to "unsigned int"
---
Changes since v2:
* dropped patch "rtc: abx80x: move part autodetection before RV1805 configuration"
* PATCH 2 ("rtc: abx80x: add mutex protection for register writes")
  New patch
* PATCH 5 ("rtc: abx80x: use regmap instead of I2C specific API")
  - return PTR_ERR(regmap) on I2C regmap init error
* PATCH 8 ("rtc: abx80x: add support for ABX81X")
  - return PTR_ERR(regmap) on SPI regmap init error
---
Changes since v1:
* PATCH 1 ("dt-bindings: rtc: abx80x: document ABX81X RTCs")
  - added missing "spi-peripherals-props" reference
  - added abx815 compatible strings to the trickle charger enum list
* PATCH 2 ("rtc: abx80x: move part autodetection before RV1805 configuration")
  New patch
* PATCH 3 ("rtc: abx80x: properly handle shared IRQs")
  New patch
* PATCH 5 ("rtc: abx80x: use regmap instead of I2C specific API")
  - changed regmap_read() argument types from `int` to `unsigned int`
---

Antoni Pokusinski (9):
  dt-bindings: rtc: abx80x: document ABX81X RTCs
  rtc: abx80x: fix error check after i2c_smbus_read in read_alarm()
  rtc: abx80x: add mutex protection for register writes
  rtc: abx80x: properly handle shared IRQs
  rtc: abx80x: add irq to struct abx80x_priv
  rtc: abx80x: use regmap instead of I2C specific API
  rtc: abx80x: replace read-modify-write pattern with regmap helpers
  rtc: abx80x: create abx80x_i2c_probe()
  rtc: abx80x: add support for ABX81X

 .../bindings/rtc/abracon,abx80x.yaml          |  18 +-
 drivers/rtc/Kconfig                           |  25 +-
 drivers/rtc/rtc-abx80x.c                      | 664 +++++++++++-------
 3 files changed, 454 insertions(+), 253 deletions(-)

-- 
2.55.0