drivers/net/ethernet/freescale/fec.h | 2 +- drivers/net/ethernet/freescale/fec_main.c | 11 ++++++++--- drivers/net/ethernet/freescale/fec_ptp.c | 22 ++++++++++++++-------- 3 files changed, 23 insertions(+), 12 deletions(-)
From: bui duc phuc <phucduc.bui@gmail.com>
Change fec_ptp_init() to return an error code instead of silently
ignoring failures during PTP initialization.
The PPS IRQ is not required for the FEC/PTP functionality, so its
absence should not make the probe fail. However, an unavailable
optional IRQ should be distinguished from an actual error returned
during the IRQ lookup.
If a platform does not support the PPS IRQ, it can omit the IRQ from
its device tree and the optional lookup will return -ENXIO. Propagate
other errors from the IRQ lookup instead of silently ignoring them.
Also propagate failures from devm_request_irq() and ptp_clock_register().
Update the function declaration in fec.h accordingly.
Found by manual code inspection.
Fixes: b86bcb299092 ("net: fec_ptp: Use platform_get_irq_xxx_optional() to avoid error message")
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
Link v1:
https://lore.kernel.org/all/20260820111416.97917-1-phucduc.bui@gmail.com/
Link v2:
https://lore.kernel.org/all/20260903092430.354186-1-phucduc.bui@gmail.com/
Changes in v2:
- Squash the two patches into one.
- Add error handling for platform_get_irq_byname_optional().
- Fix error handling for ptp_clock_register().
Changes in v3:
- Retarget the patch to the net tree instead of net-next.
- Add error handling for platform_get_irq_byname_optional()
in fec_probe() for the fec_enet_interrupt IRQ.
drivers/net/ethernet/freescale/fec.h | 2 +-
drivers/net/ethernet/freescale/fec_main.c | 11 ++++++++---
drivers/net/ethernet/freescale/fec_ptp.c | 22 ++++++++++++++--------
3 files changed, 23 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
index 7176803146f3..8831da37326b 100644
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -692,7 +692,7 @@ struct fec_enet_private {
u64 ethtool_stats[];
};
-void fec_ptp_init(struct platform_device *pdev, int irq_idx);
+int fec_ptp_init(struct platform_device *pdev, int irq_idx);
void fec_ptp_restore_state(struct fec_enet_private *fep);
void fec_ptp_save_state(struct fec_enet_private *fep);
void fec_ptp_stop(struct platform_device *pdev);
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 794ec427b0ee..a9a458703547 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -5384,8 +5384,11 @@ fec_probe(struct platform_device *pdev)
goto failed_reset;
irq_cnt = fec_enet_get_irq_cnt(pdev);
- if (fep->bufdesc_ex)
- fec_ptp_init(pdev, irq_cnt);
+ if (fep->bufdesc_ex) {
+ ret = fec_ptp_init(pdev, irq_cnt);
+ if (ret)
+ goto failed_reset;
+ }
ret = fec_enet_init(ndev);
if (ret)
@@ -5394,7 +5397,9 @@ fec_probe(struct platform_device *pdev)
for (i = 0; i < irq_cnt; i++) {
snprintf(irq_name, sizeof(irq_name), "int%d", i);
irq = platform_get_irq_byname_optional(pdev, irq_name);
- if (irq < 0)
+ if (irq < 0 && irq != -ENXIO)
+ return irq;
+ if (irq == -ENXIO)
irq = platform_get_irq(pdev, i);
if (irq < 0) {
ret = irq;
diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c
index 56801c2009d5..557a76797eba 100644
--- a/drivers/net/ethernet/freescale/fec_ptp.c
+++ b/drivers/net/ethernet/freescale/fec_ptp.c
@@ -736,7 +736,7 @@ static irqreturn_t fec_pps_interrupt(int irq, void *dev_id)
* cyclecounter init routine and exits.
*/
-void fec_ptp_init(struct platform_device *pdev, int irq_idx)
+int fec_ptp_init(struct platform_device *pdev, int irq_idx)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct fec_enet_private *fep = netdev_priv(ndev);
@@ -779,26 +779,32 @@ void fec_ptp_init(struct platform_device *pdev, int irq_idx)
HRTIMER_MODE_REL);
irq = platform_get_irq_byname_optional(pdev, "pps");
- if (irq < 0)
+ if (irq < 0 && irq != -ENXIO)
+ return irq;
+ if (irq == -ENXIO) {
irq = platform_get_irq_optional(pdev, irq_idx);
- /* Failure to get an irq is not fatal,
- * only the PTP_CLOCK_PPS clock events should stop
- */
- if (irq >= 0) {
+ if (irq < 0 && irq != -ENXIO)
+ return irq;
+ }
+
+ if (irq > 0) {
ret = devm_request_irq(&pdev->dev, irq, fec_pps_interrupt,
0, pdev->name, ndev);
if (ret < 0)
- dev_warn(&pdev->dev, "request for pps irq failed(%d)\n",
- ret);
+ return ret;
}
fep->ptp_clock = ptp_clock_register(&fep->ptp_caps, &pdev->dev);
if (IS_ERR(fep->ptp_clock)) {
+ ret = PTR_ERR(fep->ptp_clock);
fep->ptp_clock = NULL;
dev_err(&pdev->dev, "ptp_clock_register failed\n");
+ return ret;
}
schedule_delayed_work(&fep->time_keep, HZ);
+
+ return 0;
}
void fec_ptp_save_state(struct fec_enet_private *fep)
--
2.43.0
This is an AI-generated review of your patch. The human sending this
email has considered the AI review valid, or at least plausible.
Full review at: https://sashiko.dev/#/patchset/20260904105542.70540-1-phucduc.bui@gmail.com?part=1
---
net: fec: Propagate PTP initialization errors
Change fec_ptp_init() to return an error code instead of silently
ignoring failures during PTP initialization.
Link: https://lore.kernel.org/all/20260903092430.354186-1-phucduc.bui@gmail.com/
> diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
> index 794ec427b0ee6..a9a458703547d 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
[ ... ]
> @@ -5394,7 +5397,9 @@ fec_probe(struct platform_device *pdev)
> for (i = 0; i < irq_cnt; i++) {
> snprintf(irq_name, sizeof(irq_name), "int%d", i);
> irq = platform_get_irq_byname_optional(pdev, irq_name);
> - if (irq < 0)
> + if (irq < 0 && irq != -ENXIO)
> + return irq;
[Severity: High]
Does this direct return bypass the error handling cleanup at the end of
fec_probe()?
By returning directly instead of jumping to the failed_irq label, the driver
bypasses fec_ptp_stop(). This leaves the fep->time_keep delayed work
(scheduled earlier in fec_ptp_init()) active.
It also bypasses free_netdev(ndev), which leaks the net_device structure.
When the driver core cleans up devres allocations on probe failure, it unmaps
fep->hwp. If the un-canceled delayed work subsequently fires, will it attempt
to access the unmapped memory at fep->hwp and cause a kernel panic?
[ ... ]
> diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c
> index 56801c2009d59..557a76797ebaa 100644
> --- a/drivers/net/ethernet/freescale/fec_ptp.c
> +++ b/drivers/net/ethernet/freescale/fec_ptp.c
[ ... ]
> @@ -779,26 +779,32 @@ void fec_ptp_init(struct platform_device *pdev, int irq_idx)
> HRTIMER_MODE_REL);
>
> irq = platform_get_irq_byname_optional(pdev, "pps");
[ ... ]
> + if (irq > 0) {
> ret = devm_request_irq(&pdev->dev, irq, fec_pps_interrupt,
> 0, pdev->name, ndev);
> if (ret < 0)
> - dev_warn(&pdev->dev, "request for pps irq failed(%d)\n",
> - ret);
> + return ret;
> }
>
> fep->ptp_clock = ptp_clock_register(&fep->ptp_caps, &pdev->dev);
> if (IS_ERR(fep->ptp_clock)) {
> + ret = PTR_ERR(fep->ptp_clock);
> fep->ptp_clock = NULL;
> dev_err(&pdev->dev, "ptp_clock_register failed\n");
> + return ret;
[Severity: High]
Does this error return leave the devm-managed IRQ active while propagating an
error back to the probe function?
If ptp_clock_register() fails, fec_ptp_init() returns an error which
propagates to fec_probe(), causing it to jump to failed_reset.
The error path in fec_probe() manually frees ndev via free_netdev(ndev).
However, the PPS interrupt was registered just prior using devm_request_irq(),
so it remains active until fec_probe() returns and devres tears it down.
If the PPS interrupt fires between the manual free of ndev and the devres
cleanup, will fec_pps_interrupt() cast dev_id to ndev and attempt to
dereference the already-freed ndev structure, causing a use-after-free crash?
> > - if (irq < 0) > > + if (irq < 0 && irq != -ENXIO) > > + return irq; > > [Severity: High] > Does this direct return bypass the error handling cleanup at the end of > fec_probe()? > > By returning directly instead of jumping to the failed_irq label, the driver > bypasses fec_ptp_stop(). This leaves the fep->time_keep delayed work > (scheduled earlier in fec_ptp_init()) active. > > It also bypasses free_netdev(ndev), which leaks the net_device structure. > > When the driver core cleans up devres allocations on probe failure, it unmaps > fep->hwp. If the un-canceled delayed work subsequently fires, will it attempt > to access the unmapped memory at fep->hwp and cause a kernel panic? > Yes, this was my mistake. It should be: + ret = irq; + goto failed_irq; instead of : + return irq;. I will fix this in the next version. > [Severity: High] > Does this error return leave the devm-managed IRQ active while propagating an > error back to the probe function? > > If ptp_clock_register() fails, fec_ptp_init() returns an error which > propagates to fec_probe(), causing it to jump to failed_reset. > > The error path in fec_probe() manually frees ndev via free_netdev(ndev). > > However, the PPS interrupt was registered just prior using devm_request_irq(), > so it remains active until fec_probe() returns and devres tears it down. > > If the PPS interrupt fires between the manual free of ndev and the devres > cleanup, will fec_pps_interrupt() cast dev_id to ndev and attempt to > dereference the already-freed ndev structure, causing a use-after-free crash? This is a pre-existing issue: https://lore.kernel.org/all/CAABR9nEkci1OFoHx2qmJWvKabUN=JSu5AcPynQ-tH02wxHEmOA@mail.gmail.com/ Previously, I suggested using request_irq() and free_irq() manually, but that would add more code. Another option is to replace alloc_etherdev_mqs() with devm_alloc_etherdev_mqs(). With the LIFO cleanup order, devm_request_irq() will be cleaned up before free_netdev(res->ndev), which should resolve the issue. Since this is a long-standing, pre-existing issue, I think it would be better to handle it in a separate patch.
© 2016 - 2026 Red Hat, Inc.