[PATCH v2 0/3] Support AM62P silicon revision detection via uniphier-efuse

Judith Mendez posted 3 patches 3 weeks, 2 days ago
There is a newer version of this series
.../devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml   | 4 +++-
drivers/nvmem/Kconfig                                         | 3 ++-
drivers/nvmem/uniphier-efuse.c                                | 1 +
3 files changed, 6 insertions(+), 2 deletions(-)
[PATCH v2 0/3] Support AM62P silicon revision detection via uniphier-efuse
Posted by Judith Mendez 3 weeks, 2 days ago
This series adds support for reading AM62P silicon revision from the
efuse GP_SW register. The solution reuses the  existing uniphier-efuse
driver by adding ti,am62p-efuse as a compatible string. The three patches
update the devicetree binding to document the new compatible, configure
the driver as mandatory builtin for K3 architectures, and extend the driver
to support AM62P devices. The uniphier-efuse driver is simple enough to be
reused for efuse register reads on the AM62P SoC.

Patches have been tested on AM62p SK hardware using SR1.0, SR1.1 and SR1.2
silicon.

Changes since rfc:
- rebase against next
- update cover letter

Link to rfc:
https://lore.kernel.org/all/20260812154442.3379851-1-jm@ti.com/

Judith Mendez (3):
  dt-bindings: nvmem: uniphier-efuse: Add ti,am62p-efuse compatible
  nvmem: uniphier-efuse: Enable for K3 SoCs
  nvmem: uniphier-efuse: Add ti,am62p-efuse compatible

 .../devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml   | 4 +++-
 drivers/nvmem/Kconfig                                         | 3 ++-
 drivers/nvmem/uniphier-efuse.c                                | 1 +
 3 files changed, 6 insertions(+), 2 deletions(-)

-- 
2.34.1
Re: [PATCH v2 0/3] Support AM62P silicon revision detection via uniphier-efuse
Posted by Kunihiko Hayashi 3 weeks, 1 day ago
Hi Judith,

On 2026/09/03 7:27, Judith Mendez wrote:
> This series adds support for reading AM62P silicon revision from the
> efuse GP_SW register. The solution reuses the  existing uniphier-efuse
> driver by adding ti,am62p-efuse as a compatible string. The three patches
> update the devicetree binding to document the new compatible, configure
> the driver as mandatory builtin for K3 architectures, and extend the
> driver
> to support AM62P devices. The uniphier-efuse driver is simple enough to be
> reused for efuse register reads on the AM62P SoC.
> 
> Patches have been tested on AM62p SK hardware using SR1.0, SR1.1 and SR1.2
> silicon.
> 
> Changes since rfc:
> - rebase against next
> - update cover letter
> 
> Link to rfc:
> https://lore.kernel.org/all/20260812154442.3379851-1-jm@ti.com/
> 
> Judith Mendez (3):
>    dt-bindings: nvmem: uniphier-efuse: Add ti,am62p-efuse compatible
>    nvmem: uniphier-efuse: Enable for K3 SoCs
>    nvmem: uniphier-efuse: Add ti,am62p-efuse compatible
> 
>   .../devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml   | 4 +++-
>   drivers/nvmem/Kconfig                                         | 3 ++-
>   drivers/nvmem/uniphier-efuse.c                                | 1 +
>   3 files changed, 6 insertions(+), 2 deletions(-)
Looks good to me.

Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

Thank you,

---
Best Regards
Kunihiko Hayashi