docs: parport: Fix FIFO Kconfig symbol

[PATCH] docs: parport: Fix FIFO Kconfig symbol

Posted by Karl Mehltretter 1 month, 1 week ago

The ReST conversion shortened CONFIG_PARPORT_PC_FIFO to the nonexistent
CONFIG_FIFO symbol. Restore the full name.

Fixes: e095f0711b49 ("Documentation/parport.txt: convert to ReST markup")
Assisted-by: Codex:gpt-5.6-sol
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
---
 Documentation/admin-guide/parport.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/admin-guide/parport.rst b/Documentation/admin-guide/parport.rst
index ad3f9b8a11e19..4aef45262bd49 100644
--- a/Documentation/admin-guide/parport.rst
+++ b/Documentation/admin-guide/parport.rst
@@ -273,7 +273,7 @@ If that works fine, try with ``io=0x378 irq=7`` (adjust for your
 hardware), to make it use interrupt-driven in-software protocol.
 
 If **that** works fine, then one of the hardware modes isn't working
-right.  Enable ``CONFIG_FIFO`` (no, it isn't a module option,
+right.  Enable ``CONFIG_PARPORT_PC_FIFO`` (no, it isn't a module option,
 and yes, it should be), set the port to ECP mode in the BIOS and note
 the DMA channel, and try with::
 
-- 
2.53.0

Re: [PATCH] docs: parport: Fix FIFO Kconfig symbol

Posted by Jonathan Corbet 3 weeks, 6 days ago

Karl Mehltretter <kmehltretter@gmail.com> writes:

> The ReST conversion shortened CONFIG_PARPORT_PC_FIFO to the nonexistent
> CONFIG_FIFO symbol. Restore the full name.
>
> Fixes: e095f0711b49 ("Documentation/parport.txt: convert to ReST markup")
> Assisted-by: Codex:gpt-5.6-sol
> Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
> ---
>  Documentation/admin-guide/parport.rst | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/admin-guide/parport.rst b/Documentation/admin-guide/parport.rst
> index ad3f9b8a11e19..4aef45262bd49 100644
> --- a/Documentation/admin-guide/parport.rst
> +++ b/Documentation/admin-guide/parport.rst
> @@ -273,7 +273,7 @@ If that works fine, try with ``io=0x378 irq=7`` (adjust for your
>  hardware), to make it use interrupt-driven in-software protocol.
>  
>  If **that** works fine, then one of the hardware modes isn't working
> -right.  Enable ``CONFIG_FIFO`` (no, it isn't a module option,
> +right.  Enable ``CONFIG_PARPORT_PC_FIFO`` (no, it isn't a module option,
>  and yes, it should be), set the port to ECP mode in the BIOS and note

Applied, thanks.

jon

Re: [PATCH] docs: parport: Fix FIFO Kconfig symbol

Posted by Randy Dunlap 1 month ago


On 8/22/26 1:22 AM, Karl Mehltretter wrote:
> The ReST conversion shortened CONFIG_PARPORT_PC_FIFO to the nonexistent
> CONFIG_FIFO symbol. Restore the full name.
> 
> Fixes: e095f0711b49 ("Documentation/parport.txt: convert to ReST markup")
> Assisted-by: Codex:gpt-5.6-sol
> Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>

Acked-by: Randy Dunlap <rdunlap@infradead.org>
Thanks.

> ---
>  Documentation/admin-guide/parport.rst | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/admin-guide/parport.rst b/Documentation/admin-guide/parport.rst
> index ad3f9b8a11e19..4aef45262bd49 100644
> --- a/Documentation/admin-guide/parport.rst
> +++ b/Documentation/admin-guide/parport.rst
> @@ -273,7 +273,7 @@ If that works fine, try with ``io=0x378 irq=7`` (adjust for your
>  hardware), to make it use interrupt-driven in-software protocol.
>  
>  If **that** works fine, then one of the hardware modes isn't working
> -right.  Enable ``CONFIG_FIFO`` (no, it isn't a module option,
> +right.  Enable ``CONFIG_PARPORT_PC_FIFO`` (no, it isn't a module option,
>  and yes, it should be), set the port to ECP mode in the BIOS and note
>  the DMA channel, and try with::
>  

-- 
~Randy