.../devicetree/bindings/regulator/lp872x.txt | 161 ------------------ .../devicetree/bindings/regulator/ti,lp872x.yaml | 186 +++++++++++++++++++++ 2 files changed, 186 insertions(+), 161 deletions(-)
Convert the TI/National Semiconductor LP8720/LP8725 PMIC text binding
to standard DT schema. No functional changes.
Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>
---
.../devicetree/bindings/regulator/lp872x.txt | 161 ------------------
.../devicetree/bindings/regulator/ti,lp872x.yaml | 186 +++++++++++++++++++++
2 files changed, 186 insertions(+), 161 deletions(-)
diff --git a/Documentation/devicetree/bindings/regulator/lp872x.txt b/Documentation/devicetree/bindings/regulator/lp872x.txt
deleted file mode 100644
index ab895cd1cac1..000000000000
--- a/Documentation/devicetree/bindings/regulator/lp872x.txt
+++ /dev/null
@@ -1,161 +0,0 @@
-Binding for TI/National Semiconductor LP872x Driver
-
-Required properties:
- - compatible: "ti,lp8720" or "ti,lp8725"
- - reg: I2C slave address. 0x7d = LP8720, 0x7a = LP8725
-
-Optional properties:
- - ti,general-config: the value of LP872X_GENERAL_CFG register (u8)
- (LP8720)
- bit[2]: BUCK output voltage control by external DVS pin or register
- 1 = external pin, 0 = bit7 of register 08h
- bit[1]: sleep control by external DVS pin or register
- 1 = external pin, 0 = bit6 of register 08h
- bit[0]: time step unit(usec). 1 = 25, 0 = 50
-
- (LP8725)
- bit[7:6]: time step unit(usec). 00 = 32, 01 = 64, 10 = 128, 11 = 256
- bit[4]: BUCK2 enable control. 1 = enable, 0 = disable
- bit[3]: BUCK2 output voltage register address. 1 = 0Ah, 0 = 0Bh
- bit[2]: BUCK1 output voltage control by external DVS pin or register
- 1 = register 08h, 0 = DVS
- bit[1]: LDO sleep control. 1 = sleep mode, 0 = normal
- bit[0]: BUCK1 enable control, 1 = enable, 0 = disable
-
- For more details, please see the datasheet.
-
- - ti,update-config: define it when LP872X_GENERAL_CFG register should be set
- - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices.
- - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2.
- - ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH.
- - enable-gpios: GPIO specifier for EN pin control of LP872x devices.
-
- Sub nodes for regulator_init_data
- LP8720 has maximum 6 nodes. (child name: ldo1 ~ 5 and buck)
- LP8725 has maximum 9 nodes. (child name: ldo1 ~ 5, lilo1,2 and buck1,2)
- For more details, please see the following binding document.
- (Documentation/devicetree/bindings/regulator/regulator.txt)
-
-Datasheet
- - LP8720: https://www.ti.com/lit/ds/symlink/lp8720.pdf
- - LP8725: https://www.ti.com/lit/ds/symlink/lp8725.pdf
-
-Example 1) LP8720
-
-lp8720@7d {
- compatible = "ti,lp8720";
- reg = <0x7d>;
-
- /* external DVS pin used, timestep is 25usec */
- ti,general-config = /bits/ 8 <0x03>;
- ti,update-config;
-
- /*
- * The dvs-gpio depends on the processor environment.
- * For example, following GPIO specifier means GPIO134 in OMAP4.
- */
- ti,dvs-gpio = <&gpio5 6 0>;
- ti,dvs-vsel = /bits/ 8 <1>; /* SEL_V2 */
- ti,dvs-state = /bits/ 8 <1>; /* DVS_HIGH */
-
- vaf: ldo1 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vmmc: ldo2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vcam_io: ldo3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- };
-
- vcam_core: ldo4 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <2850000>;
- regulator-boot-on;
- };
-
- vcam: ldo5 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vcc: buck {
- regulator-name = "VBUCK";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <2300000>;
- };
-};
-
-Example 2) LP8725
-
-lp8725@7a {
- compatible = "ti,lp8725";
- reg = <0x7a>;
-
- /* Enable BUCK1,2, no DVS, normal LDO mode, timestep is 256usec */
- ti,general-config = /bits/ 8 <0xdd>;
- ti,update-config;
-
- vcam_io: ldo1 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vcam_core: ldo2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vcam: ldo3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vcmmb_io: ldo4 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- };
-
- vcmmb_core: ldo5 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- };
-
- vaux1: lilo1 {
- regulator-name = "VAUX1";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vaux2: lilo2 {
- regulator-name = "VAUX2";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vcc1: buck1 {
- regulator-name = "VBUCK1";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3000000>;
- regulator-min-microamp = <460000>;
- regulator-max-microamp = <1370000>;
- regulator-boot-on;
- };
-
- vcc2: buck2 {
- regulator-name = "VBUCK2";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3000000>;
- regulator-min-microamp = <460000>;
- regulator-max-microamp = <1370000>;
- regulator-boot-on;
- };
-};
diff --git a/Documentation/devicetree/bindings/regulator/ti,lp872x.yaml b/Documentation/devicetree/bindings/regulator/ti,lp872x.yaml
new file mode 100644
index 000000000000..8e74dbb3ae30
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ti,lp872x.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,lp872x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI/National Semiconductor LP872x
+
+maintainers:
+ - Milo Kim <milo.kim@ti.com>
+
+description:
+ See Datasheet
+ LP8720 https://www.ti.com/lit/ds/symlink/lp8720.pdf
+ LP8725 https://www.ti.com/lit/ds/symlink/lp8725.pdf
+
+properties:
+ compatible:
+ enum:
+ - ti,lp8720
+ - ti,lp8725
+
+ reg:
+ enum: [0x7a, 0x7d]
+
+ ti,general-config:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ description: |
+ the value of LP872X_GENERAL_CFG register (u8)
+ (LP8720)
+ bit[2]: BUCK output voltage control by external DVS pin or register
+ 1 = external pin, 0 = bit7 of register 08h
+ bit[1]: sleep control by external DVS pin or register
+ 1 = external pin, 0 = bit6 of register 08h
+ bit[0]: time step unit(usec). 1 = 25, 0 = 50
+
+ (LP8725)
+ bit[7:6]: time step unit(usec). 00 = 32, 01 = 64, 10 = 128, 11 = 256
+ bit[4]: BUCK2 enable control. 1 = enable, 0 = disable
+ bit[3]: BUCK2 output voltage register address. 1 = 0Ah, 0 = 0Bh
+ bit[2]: BUCK1 output voltage control by external DVS pin or register
+ 1 = register 08h, 0 = DVS
+ bit[1]: LDO sleep control. 1 = sleep mode, 0 = normal
+ bit[0]: BUCK1 enable control, 1 = enable, 0 = disable
+
+ For more details, please see the datasheet.
+
+ ti,update-config:
+ type: boolean
+ description: define it when LP872X_GENERAL_CFG register should be set
+
+ ti,dvs-gpio:
+ maxItems: 1
+ description: GPIO specifier for external DVS pin control of LP872x devices.
+
+ ti,dvs-vsel:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ enum: [0, 1]
+ description: DVS selector. 0 = SEL_V1, 1 = SEL_V2.
+
+ ti,dvs-state:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ enum: [0, 1]
+ description: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH.
+
+ enable-gpios:
+ maxItems: 1
+ description: GPIO specifier for EN pin control of LP872x devices.
+
+ buck:
+ type: object
+ $ref: regulator.yaml#
+ unevaluatedProperties: false
+ description:
+ Single BUCK regulator for LP8720.
+
+patternProperties:
+ "^(buck[1-2]?|ldo[1-5]|lilo[1-2])$":
+ type: object
+ $ref: regulator.yaml#
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,lp8720
+ then:
+ properties:
+ reg:
+ const: 0x7d
+ patternProperties:
+ "^(buck[1-2]|lilo[1-2])$": false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,lp8725
+ then:
+ properties:
+ reg:
+ const: 0x7a
+ buck: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@7a {
+ compatible = "ti,lp8725";
+ reg = <0x7a>;
+
+ /* Enable BUCK1,2, no DVS, normal LDO mode, timestep is 256usec */
+ ti,general-config = /bits/ 8 <0xdd>;
+ ti,update-config;
+
+ ldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ lilo1 {
+ regulator-name = "VAUX1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ lilo2 {
+ regulator-name = "VAUX2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ buck1 {
+ regulator-name = "VBUCK1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microamp = <460000>;
+ regulator-max-microamp = <1370000>;
+ regulator-boot-on;
+ };
+
+ buck2 {
+ regulator-name = "VBUCK2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microamp = <460000>;
+ regulator-max-microamp = <1370000>;
+ regulator-boot-on;
+ };
+ };
+ };
---
base-commit: 818bebeb63dd6bf5f4e07e145f6cdbace520a34c
change-id: 20260822-ti-lp872x-a884bead9b0d
Best regards,
--
Bhargav© 2016 - 2026 Red Hat, Inc.