This series adds support for the Cypress cypd6129/cypd6229 dual
Type-C PD controllers used on the Shikra CQM/CQS/IQS platforms to
handle usb-role-switch, and wires up the corresponding DT nodes.

Changes in v2:
- dt-bindings: add a top-level "wakeup-source" property on the
  controller node (matching richtek,rt1719.yaml/ti,tps6598x.yaml) and
  move "wakeup-source;" in the example out of "connector@0" onto the
  parent node, since usb-connector.yaml ends in
  "unevaluatedProperties: false" and does not itself declare
  "wakeup-source" -- placing it inside the connector node fails
  dtbs_check. Also fixed related whitespace nitpicks in the example.
- dts: apply the same wakeup-source relocation to all three affected
  boards (shikra-cqm-evk, shikra-cqs-evk, shikra-iqs-evk).
- dts: fix shikra-iqs-evk's cypd6229 node to use the
  "cypress,cypd6229", "cypress,cypd6129" fallback compatible string
  pair required by the binding, instead of "cypress,cypd6229" alone.
- dts: fix shikra-cqm-evk/shikra-cqs-evk wiring so CYPD6129 connects
  to usb_2_dwc3_hs (secondary port) and PM4125's built-in typec
  connects to usb_1_dwc3_hs/pm4125_hs_in (primary port), and add the
  missing reverse remote-endpoint links on pm4125_hs_in/pm4125_ss_in.
- No changes to patch 2/3 (driver match table).

Link to v1: https://lore.kernel.org/all/20260820145036.2035641-1-akash.kumar@oss.qualcomm.com/

Signed-off-by: Akash Kumar <akash.kumar@oss.qualcomm.com>
---
Akash Kumar (3):
      dt-bindings: usb: Add Cypress cypd6129/cypd6229 Type-C controller
      usb: typec: ucsi: ccg: Add support for cypd6129/cypd6229
      arm64: dts: qcom: shikra: Wire up usb-role-switch for USB Type-C ports

 .../devicetree/bindings/usb/cypress,cypd6129.yaml  | 107 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts        |  84 +++++++++++++++-
 arch/arm64/boot/dts/qcom/shikra-cqm-som.dtsi       |  45 +++++++++
 arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts        |  84 +++++++++++++++-
 arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts        | 107 ++++++++++++++++++++-
 drivers/usb/typec/ucsi/ucsi_ccg.c                  |   2 +
 6 files changed, 418 insertions(+), 11 deletions(-)
---
base-commit: da0b33862d815a7c88f2a809e40b098a15a2faad
change-id: 20260821-shikra-usb-dt-v7-apply-512eccb018a1

Best regards,
-- 
Akash Kumar <akash.kumar@oss.qualcomm.com>

On 26-08-21 15:56:49, Akash Kumar wrote:
> This series adds support for the Cypress cypd6129/cypd6229 dual
> Type-C PD controllers used on the Shikra CQM/CQS/IQS platforms to
> handle usb-role-switch, and wires up the corresponding DT nodes.
> 
> Changes in v2:
> - dt-bindings: add a top-level "wakeup-source" property on the
>   controller node (matching richtek,rt1719.yaml/ti,tps6598x.yaml) and
>   move "wakeup-source;" in the example out of "connector@0" onto the
>   parent node, since usb-connector.yaml ends in
>   "unevaluatedProperties: false" and does not itself declare
>   "wakeup-source" -- placing it inside the connector node fails
>   dtbs_check. Also fixed related whitespace nitpicks in the example.
> - dts: apply the same wakeup-source relocation to all three affected
>   boards (shikra-cqm-evk, shikra-cqs-evk, shikra-iqs-evk).
> - dts: fix shikra-iqs-evk's cypd6229 node to use the
>   "cypress,cypd6229", "cypress,cypd6129" fallback compatible string
>   pair required by the binding, instead of "cypress,cypd6229" alone.
> - dts: fix shikra-cqm-evk/shikra-cqs-evk wiring so CYPD6129 connects
>   to usb_2_dwc3_hs (secondary port) and PM4125's built-in typec
>   connects to usb_1_dwc3_hs/pm4125_hs_in (primary port), and add the
>   missing reverse remote-endpoint links on pm4125_hs_in/pm4125_ss_in.
> - No changes to patch 2/3 (driver match table).
> 
> Link to v1: https://lore.kernel.org/all/20260820145036.2035641-1-akash.kumar@oss.qualcomm.com/
> 
> Signed-off-by: Akash Kumar <akash.kumar@oss.qualcomm.com>

Please do not send as reply to earlier revisions.