Remove a confusable that prevented the pdfdocs target to complete,
prompting the following error:

  Latexmk: ====Problematic refs and citations with line #s in .tex file:
  Missing character: There is no ： (U+FF1A) in font DejaVu Serif/OT:script=latn;l

Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
---
 Documentation/hwmon/gpd-fan.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/hwmon/gpd-fan.rst b/Documentation/hwmon/gpd-fan.rst
index 29527a77fe88..b27657d33056 100644
--- a/Documentation/hwmon/gpd-fan.rst
+++ b/Documentation/hwmon/gpd-fan.rst
@@ -67,7 +67,7 @@ pwm1_enable
   at full speed. Write "1" to set to manual, write "2" to let the EC control
   decide fan speed. Read this attribute to see current status.
 
-  NB：In consideration of the safety of the device, when setting to manual mode,
+  NB: In consideration of the safety of the device, when setting to manual mode,
   the pwm speed will be set to the maximum value (255) by default. You can set
   a different value by writing pwm1 later.
 

---
base-commit: 248951ddc14de84de3910f9b13f51491a8cd91df
change-id: 20260812-doc-hwmon-remove-confusable-de457420ec02

On 8/17/26 02:46, Antonin Godard wrote:
> Remove a confusable that prevented the pdfdocs target to complete,
> prompting the following error:
> 

The term "confusable" is confusing. The patch is replacing a "Fullwidth Colon"
with a standard ASCII colon.

Please either resend with updated subject and description, or I'll
fix it up while applying.

Thanks,
Guenter

>    Latexmk: ====Problematic refs and citations with line #s in .tex file:
>    Missing character: There is no ： (U+FF1A) in font DejaVu Serif/OT:script=latn;l
> 
> Signed-off-by: Antonin Godard <antonin.godard@bootlin.com>
> ---
>   Documentation/hwmon/gpd-fan.rst | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/hwmon/gpd-fan.rst b/Documentation/hwmon/gpd-fan.rst
> index 29527a77fe88..b27657d33056 100644
> --- a/Documentation/hwmon/gpd-fan.rst
> +++ b/Documentation/hwmon/gpd-fan.rst
> @@ -67,7 +67,7 @@ pwm1_enable
>     at full speed. Write "1" to set to manual, write "2" to let the EC control
>     decide fan speed. Read this attribute to see current status.
>   
> -  NB：In consideration of the safety of the device, when setting to manual mode,
> +  NB: In consideration of the safety of the device, when setting to manual mode,
>     the pwm speed will be set to the maximum value (255) by default. You can set
>     a different value by writing pwm1 later.
>   
> 
> ---
> base-commit: 248951ddc14de84de3910f9b13f51491a8cd91df
> change-id: 20260812-doc-hwmon-remove-confusable-de457420ec02
> 
>