[PATCH v4 0/2] ARM: dts: aspeed: ASRock Rack X470D4U BMC support

Tan Siewert posted 2 patches 1 month, 1 week ago
.../devicetree/bindings/arm/aspeed/aspeed.yaml     |   2 +
arch/arm/boot/dts/aspeed/Makefile                  |   2 +
.../aspeed/aspeed-bmc-asrock-x470d4u-data64.dts    |  15 +
.../boot/dts/aspeed/aspeed-bmc-asrock-x470d4u.dts  | 381 +++++++++++++++++++++
4 files changed, 400 insertions(+)
[PATCH v4 0/2] ARM: dts: aspeed: ASRock Rack X470D4U BMC support
Posted by Tan Siewert 1 month, 1 week ago
This series adds support for the BMC of the ASRock Rack X470D4U mainboard,
which uses an ASPEED AST2500.

The mainboard exists in three known flavors, the "normal" X470D4U, the
X470D4U2-2T (with 2x10G RJ45) and the X470D4U2/1N1 (an ODM version with
2x1G RJ45 that is now available in retail). The 1N1 version also has a 64MB
BMC SPI by default, but they are all swappable.

There are two device trees, one that has all the config and uses a 32MB
flash layout, and another one called "data64" (similar to facebook-fuji)
that uses the 64MB flash layout.

Please note that this board has been fully reverse-engineered.

Thanks,
Tan

Signed-off-by: Tan Siewert <tan@siewert.io>
---
Changes in v4:
- use plural wording in commit message for dt-bindings [Sashiko-bot]
- Correct model name to be ASRock instead of Asrock, and use flash instead
  of store in name [Zev]
- Link to v3: https://patch.msgid.link/20260812-ts-x470d4u-v3-0-c8e266f1663b@siewert.io

Changes in v3:
- remove mdio pinctrl from mac1 nc-si interface [Andrew Jeffrey]
- remove "st,24c128" compatibility from fru eeprom [Tan]
- enable uart1-4 [Tan]
- add a data64 tree as alternative for boards with a 64M SPI [Zev]
- add hog to bmc-ready GPIO pin as required by the host BIOS [Tan]
- fix offenses reported by scripts/dtc/dt-check-style --mode strict [Tan]
- Link to v2: https://lore.kernel.org/all/20251011112124.17588-1-tan@siewert.io/

Changes in v2:
- fix led node names [robh]
- fix missing gfx memory region and other fixable dtbs_check issues [Tan]
- Link to v1: https://lore.kernel.org/all/20250919185621.6647-1-tan@siewert.io/

To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Joel Stanley <joel@jms.id.au>
To: Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: Zev Weiss <zev@bewilderbeest.net>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org

---
Tan Siewert (2):
      dt-bindings: arm: aspeed: add ASRock X470D4U BMC
      ARM: dts: aspeed: add asrock x470d4u bmc

 .../devicetree/bindings/arm/aspeed/aspeed.yaml     |   2 +
 arch/arm/boot/dts/aspeed/Makefile                  |   2 +
 .../aspeed/aspeed-bmc-asrock-x470d4u-data64.dts    |  15 +
 .../boot/dts/aspeed/aspeed-bmc-asrock-x470d4u.dts  | 381 +++++++++++++++++++++
 4 files changed, 400 insertions(+)
---
base-commit: cd7d1ef7d74ed5f5a1790a40389bc38382924556
change-id: 20251017-ts-x470d4u-54b9e98e4333

Best regards,
--  
Tan Siewert <tan@siewert.io>
Re: [PATCH v4 0/2] ARM: dts: aspeed: ASRock Rack X470D4U BMC support
Posted by Zev Weiss 1 month, 1 week ago
On Sun, Aug 16, 2026 at 04:05:48AM PDT, Tan Siewert wrote:
>This series adds support for the BMC of the ASRock Rack X470D4U mainboard,
>which uses an ASPEED AST2500.
>
>The mainboard exists in three known flavors, the "normal" X470D4U, the
>X470D4U2-2T (with 2x10G RJ45) and the X470D4U2/1N1 (an ODM version with
>2x1G RJ45 that is now available in retail). The 1N1 version also has a 64MB
>BMC SPI by default, but they are all swappable.
>
>There are two device trees, one that has all the config and uses a 32MB
>flash layout, and another one called "data64" (similar to facebook-fuji)
>that uses the 64MB flash layout.
>
>Please note that this board has been fully reverse-engineered.
>
>Thanks,
>Tan
>
>Signed-off-by: Tan Siewert <tan@siewert.io>

Reviewed-by: Zev Weiss <zev@bewilderbeest.net>


Zev