ocores_i2c_resume() enables the controller clock before reinitializing
the hardware. If the clock rate changed while the device was suspended,
ocores_init() may reject the resulting prescaler. The callback then
returns an error with the clock still enabled, while the controller
itself remains disabled.

Disable and unprepare the clock when ocores_init() fails so the failed
resume path balances the successful clk_prepare_enable() call.

This issue was found by a static analysis checker and confirmed by manual
source review.

Fixes: e961a094afe0 ("i2c: ocores: add common clock support")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
---
 drivers/i2c/busses/i2c-ocores.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index df6ebf32d6e8f3..2d18c10358375f 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -755,7 +755,11 @@ static int ocores_i2c_resume(struct device *dev)
 	rate = clk_get_rate(i2c->clk) / 1000;
 	if (rate)
 		i2c->ip_clock_khz = rate;
-	return ocores_init(dev, i2c);
+	ret = ocores_init(dev, i2c);
+	if (ret)
+		clk_disable_unprepare(i2c->clk);
+
+	return ret;
 }
 
 static DEFINE_NOIRQ_DEV_PM_OPS(ocores_i2c_pm,
-- 
2.51.0

Hi Ruoyu,

On Thu, Aug 13, 2026 at 11:31:55PM +0800, Ruoyu Wang wrote:
> ocores_i2c_resume() enables the controller clock before reinitializing
> the hardware. If the clock rate changed while the device was suspended,
> ocores_init() may reject the resulting prescaler. The callback then
> returns an error with the clock still enabled, while the controller
> itself remains disabled.
> 
> Disable and unprepare the clock when ocores_init() fails so the failed
> resume path balances the successful clk_prepare_enable() call.
> 
> This issue was found by a static analysis checker and confirmed by manual
> source review.
> 
> Fixes: e961a094afe0 ("i2c: ocores: add common clock support")
> Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>

merged to i2c/i2c-2.

Thanks,
Andi

On Thu, Aug 13, 2026 at 8:32 AM Ruoyu Wang <ruoyuw560@gmail.com> wrote:
>
> ocores_i2c_resume() enables the controller clock before reinitializing
> the hardware. If the clock rate changed while the device was suspended,
> ocores_init() may reject the resulting prescaler. The callback then
> returns an error with the clock still enabled, while the controller
> itself remains disabled.
>
> Disable and unprepare the clock when ocores_init() fails so the failed
> resume path balances the successful clk_prepare_enable() call.
>
> This issue was found by a static analysis checker and confirmed by manual
> source review.
>
> Fixes: e961a094afe0 ("i2c: ocores: add common clock support")
> Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
> ---
>  drivers/i2c/busses/i2c-ocores.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)

Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>

-- 
Thanks.
-- Max