drm/amd/pm: Fix incorrect avg vcn utilization in gpu_metrics

[PATCH] drm/amd/pm: Fix incorrect avg vcn utilization in gpu_metrics

Posted by Boqun Feng 1 month, 3 weeks ago

In a Strix Halo system, a >100 average_vcn_activity in gpu_metrics can
be observed by running the following command:

    ffmpeg -hwaccel vappi -vappi_device /dev/dri/renderD128 -i \
    ~/sample-10s.mp4 -vf hwupload,scale_vappi=format=nv12 -c:v \
    h264_vappi /tmp/output.mp4

This is incorrect because the value is supposed to be in [0-100] range.

The cause of the issue is that the metrics.VcnActivity reported by
smu_cmn_get_metrics_table() is a permyriad value instead of a percentage
value (e.g. smu_v14_0_0_get_smu_metrics_data() has a division by 100 to
report the vcn_busy_percent). Therefore fix this by applying the same
division in smu_v14_0_0_get_gpu_metrics().

Reported-by: Mark Janes <mjanes@netflix.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
---
 drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c
index 568665265a13..1058338344b0 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c
@@ -566,7 +566,8 @@ static ssize_t smu_v14_0_0_get_gpu_metrics(struct smu_context *smu,
 	gpu_metrics->temperature_skin = metrics.SkinTemp;
 
 	gpu_metrics->average_gfx_activity = metrics.GfxActivity;
-	gpu_metrics->average_vcn_activity = metrics.VcnActivity;
+	/* metrics.VcnActivity is permyriad, convert it to percentage. */
+	gpu_metrics->average_vcn_activity = metrics.VcnActivity / 100;
 	memcpy(&gpu_metrics->average_ipu_activity[0],
 		&metrics.IpuBusy[0],
 		sizeof(uint16_t) * 8);
-- 
2.50.1 (Apple Git-155)

Re: [PATCH] drm/amd/pm: Fix incorrect avg vcn utilization in gpu_metrics

Posted by Boqun Feng 1 month, 2 weeks ago

On Wed, Aug 05, 2026 at 07:02:21AM -0700, Boqun Feng wrote:
> In a Strix Halo system, a >100 average_vcn_activity in gpu_metrics can
> be observed by running the following command:
> 
>     ffmpeg -hwaccel vappi -vappi_device /dev/dri/renderD128 -i \
>     ~/sample-10s.mp4 -vf hwupload,scale_vappi=format=nv12 -c:v \
>     h264_vappi /tmp/output.mp4
> 
> This is incorrect because the value is supposed to be in [0-100] range.
> 
> The cause of the issue is that the metrics.VcnActivity reported by
> smu_cmn_get_metrics_table() is a permyriad value instead of a percentage
> value (e.g. smu_v14_0_0_get_smu_metrics_data() has a division by 100 to
> report the vcn_busy_percent). Therefore fix this by applying the same
> division in smu_v14_0_0_get_gpu_metrics().
> 
> Reported-by: Mark Janes <mjanes@netflix.com>
> Signed-off-by: Boqun Feng <boqun@kernel.org>

Ping?

Regards,
Boqun

> ---
>  drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c
> index 568665265a13..1058338344b0 100644
> --- a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c
> +++ b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c
> @@ -566,7 +566,8 @@ static ssize_t smu_v14_0_0_get_gpu_metrics(struct smu_context *smu,
>  	gpu_metrics->temperature_skin = metrics.SkinTemp;
>  
>  	gpu_metrics->average_gfx_activity = metrics.GfxActivity;
> -	gpu_metrics->average_vcn_activity = metrics.VcnActivity;
> +	/* metrics.VcnActivity is permyriad, convert it to percentage. */
> +	gpu_metrics->average_vcn_activity = metrics.VcnActivity / 100;
>  	memcpy(&gpu_metrics->average_ipu_activity[0],
>  		&metrics.IpuBusy[0],
>  		sizeof(uint16_t) * 8);
> -- 
> 2.50.1 (Apple Git-155)
>

Re: [PATCH] drm/amd/pm: Fix incorrect avg vcn utilization in gpu_metrics

Posted by Alex Deucher 1 month, 2 weeks ago

On Thu, Aug 13, 2026 at 5:36 PM Boqun Feng <boqun@kernel.org> wrote:
>
> On Wed, Aug 05, 2026 at 07:02:21AM -0700, Boqun Feng wrote:
> > In a Strix Halo system, a >100 average_vcn_activity in gpu_metrics can
> > be observed by running the following command:
> >
> >     ffmpeg -hwaccel vappi -vappi_device /dev/dri/renderD128 -i \
> >     ~/sample-10s.mp4 -vf hwupload,scale_vappi=format=nv12 -c:v \
> >     h264_vappi /tmp/output.mp4
> >
> > This is incorrect because the value is supposed to be in [0-100] range.
> >
> > The cause of the issue is that the metrics.VcnActivity reported by
> > smu_cmn_get_metrics_table() is a permyriad value instead of a percentage
> > value (e.g. smu_v14_0_0_get_smu_metrics_data() has a division by 100 to
> > report the vcn_busy_percent). Therefore fix this by applying the same
> > division in smu_v14_0_0_get_gpu_metrics().

I think this is correct as is.  smu_v14_0_0_get_smu_metrics_data() is
used to fetch data for standardized formats like hwmon while
smu_v14_0_0_get_gpu_metrics() is for dumping the raw metrics data.

Alex

> >
> > Reported-by: Mark Janes <mjanes@netflix.com>
> > Signed-off-by: Boqun Feng <boqun@kernel.org>
>
> Ping?
>
> Regards,
> Boqun
>
> > ---
> >  drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c | 3 ++-
> >  1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c
> > index 568665265a13..1058338344b0 100644
> > --- a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c
> > +++ b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c
> > @@ -566,7 +566,8 @@ static ssize_t smu_v14_0_0_get_gpu_metrics(struct smu_context *smu,
> >       gpu_metrics->temperature_skin = metrics.SkinTemp;
> >
> >       gpu_metrics->average_gfx_activity = metrics.GfxActivity;
> > -     gpu_metrics->average_vcn_activity = metrics.VcnActivity;
> > +     /* metrics.VcnActivity is permyriad, convert it to percentage. */
> > +     gpu_metrics->average_vcn_activity = metrics.VcnActivity / 100;
> >       memcpy(&gpu_metrics->average_ipu_activity[0],
> >               &metrics.IpuBusy[0],
> >               sizeof(uint16_t) * 8);
> > --
> > 2.50.1 (Apple Git-155)
> >

Re: [PATCH] drm/amd/pm: Fix incorrect avg vcn utilization in gpu_metrics

Posted by Boqun Feng 1 month, 2 weeks ago

On Thu, Aug 13, 2026 at 06:01:47PM -0400, Alex Deucher wrote:
> On Thu, Aug 13, 2026 at 5:36 PM Boqun Feng <boqun@kernel.org> wrote:
> >
> > On Wed, Aug 05, 2026 at 07:02:21AM -0700, Boqun Feng wrote:
> > > In a Strix Halo system, a >100 average_vcn_activity in gpu_metrics can
> > > be observed by running the following command:
> > >
> > >     ffmpeg -hwaccel vappi -vappi_device /dev/dri/renderD128 -i \
> > >     ~/sample-10s.mp4 -vf hwupload,scale_vappi=format=nv12 -c:v \
> > >     h264_vappi /tmp/output.mp4
> > >
> > > This is incorrect because the value is supposed to be in [0-100] range.
> > >
> > > The cause of the issue is that the metrics.VcnActivity reported by
> > > smu_cmn_get_metrics_table() is a permyriad value instead of a percentage
> > > value (e.g. smu_v14_0_0_get_smu_metrics_data() has a division by 100 to
> > > report the vcn_busy_percent). Therefore fix this by applying the same
> > > division in smu_v14_0_0_get_gpu_metrics().
> 
> I think this is correct as is.  smu_v14_0_0_get_smu_metrics_data() is
> used to fetch data for standardized formats like hwmon while
> smu_v14_0_0_get_gpu_metrics() is for dumping the raw metrics data.
> 

Well, then kgd_pp_interface.h needs some help?

struct gpu_metrics_v3_0 {
	...
	/* Utilization */
	/* time filtered GFX busy % [0-100] */
	uint16_t			average_gfx_activity;
	/* time filtered VCN busy % [0-100] */
	uint16_t			average_vcn_activity;
	...
}

Clearly it's not true.

[Cc amdgpu_top]

Regards,
Boqun

> Alex
> 
> > >
> > > Reported-by: Mark Janes <mjanes@netflix.com>
> > > Signed-off-by: Boqun Feng <boqun@kernel.org>
> >
> > Ping?
> >
> > Regards,
> > Boqun
> >
> > > ---
> > >  drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c | 3 ++-
> > >  1 file changed, 2 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c
> > > index 568665265a13..1058338344b0 100644
> > > --- a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c
> > > +++ b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c
> > > @@ -566,7 +566,8 @@ static ssize_t smu_v14_0_0_get_gpu_metrics(struct smu_context *smu,
> > >       gpu_metrics->temperature_skin = metrics.SkinTemp;
> > >
> > >       gpu_metrics->average_gfx_activity = metrics.GfxActivity;
> > > -     gpu_metrics->average_vcn_activity = metrics.VcnActivity;
> > > +     /* metrics.VcnActivity is permyriad, convert it to percentage. */
> > > +     gpu_metrics->average_vcn_activity = metrics.VcnActivity / 100;
> > >       memcpy(&gpu_metrics->average_ipu_activity[0],
> > >               &metrics.IpuBusy[0],
> > >               sizeof(uint16_t) * 8);
> > > --
> > > 2.50.1 (Apple Git-155)
> > >

Re: [PATCH] drm/amd/pm: Fix incorrect avg vcn utilization in gpu_metrics

Posted by Umio-Yasuno - coelacanth_dream 1 month, 2 weeks ago

Apologies, I forgot to set the CC. Below is my opinion that I wrote outside the thread.

---
amdgpu_top already divides average_vcn_activity in gpu_metrics_v3_0 by 100, so this patch would unfortunately end up affecting user-space applications.

In my view, if users want to obtain media engine usage that is properly corrected based on the firmware (or firmware version) in the AMDGPU driver, the best option is to use the vcn_busy_percent sysfs interface.
However, that adds extra reading cost.

Alternatively, since gpu_metrics is designed as an interface that provides raw data[^1] (but undocumented it[^2]), it would be better to have the correction applied on the user-space.

[^1]: https://gitlab.freedesktop.org/drm/amd/-/work_items/3251#note_2904104
[^2]: https://www.kernel.org/doc/html/latest/gpu/amdgpu/thermal.html#gpu-metrics
---

On Friday, August 14th, 2026 at 7:25, Boqun Feng <boqun@kernel.org> wrote:

> On Thu, Aug 13, 2026 at 06:01:47PM -0400, Alex Deucher wrote:
> > On Thu, Aug 13, 2026 at 5:36 PM Boqun Feng <boqun@kernel.org> wrote:
> > >
> > > On Wed, Aug 05, 2026 at 07:02:21AM -0700, Boqun Feng wrote:
> > > > In a Strix Halo system, a >100 average_vcn_activity in gpu_metrics can
> > > > be observed by running the following command:
> > > >
> > > >     ffmpeg -hwaccel vappi -vappi_device /dev/dri/renderD128 -i \
> > > >     ~/sample-10s.mp4 -vf hwupload,scale_vappi=format=nv12 -c:v \
> > > >     h264_vappi /tmp/output.mp4
> > > >
> > > > This is incorrect because the value is supposed to be in [0-100] range.
> > > >
> > > > The cause of the issue is that the metrics.VcnActivity reported by
> > > > smu_cmn_get_metrics_table() is a permyriad value instead of a percentage
> > > > value (e.g. smu_v14_0_0_get_smu_metrics_data() has a division by 100 to
> > > > report the vcn_busy_percent). Therefore fix this by applying the same
> > > > division in smu_v14_0_0_get_gpu_metrics().
> >
> > I think this is correct as is.  smu_v14_0_0_get_smu_metrics_data() is
> > used to fetch data for standardized formats like hwmon while
> > smu_v14_0_0_get_gpu_metrics() is for dumping the raw metrics data.
> >
> 
> Well, then kgd_pp_interface.h needs some help?
> 
> struct gpu_metrics_v3_0 {
> 	...
> 	/* Utilization */
> 	/* time filtered GFX busy % [0-100] */
> 	uint16_t			average_gfx_activity;
> 	/* time filtered VCN busy % [0-100] */
> 	uint16_t			average_vcn_activity;
> 	...
> }
> 
> Clearly it's not true.
> 
> [Cc amdgpu_top]
> 
> Regards,
> Boqun
> 
> > Alex
> >
> > > >
> > > > Reported-by: Mark Janes <mjanes@netflix.com>
> > > > Signed-off-by: Boqun Feng <boqun@kernel.org>
> > >
> > > Ping?
> > >
> > > Regards,
> > > Boqun
> > >
> > > > ---
> > > >  drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c | 3 ++-
> > > >  1 file changed, 2 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c
> > > > index 568665265a13..1058338344b0 100644
> > > > --- a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c
> > > > +++ b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c
> > > > @@ -566,7 +566,8 @@ static ssize_t smu_v14_0_0_get_gpu_metrics(struct smu_context *smu,
> > > >       gpu_metrics->temperature_skin = metrics.SkinTemp;
> > > >
> > > >       gpu_metrics->average_gfx_activity = metrics.GfxActivity;
> > > > -     gpu_metrics->average_vcn_activity = metrics.VcnActivity;
> > > > +     /* metrics.VcnActivity is permyriad, convert it to percentage. */
> > > > +     gpu_metrics->average_vcn_activity = metrics.VcnActivity / 100;
> > > >       memcpy(&gpu_metrics->average_ipu_activity[0],
> > > >               &metrics.IpuBusy[0],
> > > >               sizeof(uint16_t) * 8);
> > > > --
> > > > 2.50.1 (Apple Git-155)
> > > >
>

Re: [PATCH] drm/amd/pm: Fix incorrect avg vcn utilization in gpu_metrics

Posted by Alex Deucher 1 month, 2 weeks ago

On Thu, Aug 13, 2026 at 6:25 PM Boqun Feng <boqun@kernel.org> wrote:
>
> On Thu, Aug 13, 2026 at 06:01:47PM -0400, Alex Deucher wrote:
> > On Thu, Aug 13, 2026 at 5:36 PM Boqun Feng <boqun@kernel.org> wrote:
> > >
> > > On Wed, Aug 05, 2026 at 07:02:21AM -0700, Boqun Feng wrote:
> > > > In a Strix Halo system, a >100 average_vcn_activity in gpu_metrics can
> > > > be observed by running the following command:
> > > >
> > > >     ffmpeg -hwaccel vappi -vappi_device /dev/dri/renderD128 -i \
> > > >     ~/sample-10s.mp4 -vf hwupload,scale_vappi=format=nv12 -c:v \
> > > >     h264_vappi /tmp/output.mp4
> > > >
> > > > This is incorrect because the value is supposed to be in [0-100] range.
> > > >
> > > > The cause of the issue is that the metrics.VcnActivity reported by
> > > > smu_cmn_get_metrics_table() is a permyriad value instead of a percentage
> > > > value (e.g. smu_v14_0_0_get_smu_metrics_data() has a division by 100 to
> > > > report the vcn_busy_percent). Therefore fix this by applying the same
> > > > division in smu_v14_0_0_get_gpu_metrics().
> >
> > I think this is correct as is.  smu_v14_0_0_get_smu_metrics_data() is
> > used to fetch data for standardized formats like hwmon while
> > smu_v14_0_0_get_gpu_metrics() is for dumping the raw metrics data.
> >
>
> Well, then kgd_pp_interface.h needs some help?
>
> struct gpu_metrics_v3_0 {
>         ...
>         /* Utilization */
>         /* time filtered GFX busy % [0-100] */
>         uint16_t                        average_gfx_activity;
>         /* time filtered VCN busy % [0-100] */
>         uint16_t                        average_vcn_activity;
>         ...
> }
>
> Clearly it's not true.

That was likely copy and pasted from the firmware interface
(smu14_driver_if_v14_0_0.h):
uint16_t VcnActivity;                //Time filtered VCN busy % [0-100]

Other generations seem to do the same thing (raw data in metrics table
and % in the hwmon type interfaces). E.g., smu_v13_0_4_ppt.c:
smu_v13_0_4_get_gpu_metrics()
gpu_metrics->average_mm_activity = metrics.UvdActivity;
vs smu_v13_0_4_get_smu_metrics_data():
*value = metrics->UvdActivity / 100;

Alex

>
> [Cc amdgpu_top]
>
> Regards,
> Boqun
>
> > Alex
> >
> > > >
> > > > Reported-by: Mark Janes <mjanes@netflix.com>
> > > > Signed-off-by: Boqun Feng <boqun@kernel.org>
> > >
> > > Ping?
> > >
> > > Regards,
> > > Boqun
> > >
> > > > ---
> > > >  drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c | 3 ++-
> > > >  1 file changed, 2 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c
> > > > index 568665265a13..1058338344b0 100644
> > > > --- a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c
> > > > +++ b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c
> > > > @@ -566,7 +566,8 @@ static ssize_t smu_v14_0_0_get_gpu_metrics(struct smu_context *smu,
> > > >       gpu_metrics->temperature_skin = metrics.SkinTemp;
> > > >
> > > >       gpu_metrics->average_gfx_activity = metrics.GfxActivity;
> > > > -     gpu_metrics->average_vcn_activity = metrics.VcnActivity;
> > > > +     /* metrics.VcnActivity is permyriad, convert it to percentage. */
> > > > +     gpu_metrics->average_vcn_activity = metrics.VcnActivity / 100;
> > > >       memcpy(&gpu_metrics->average_ipu_activity[0],
> > > >               &metrics.IpuBusy[0],
> > > >               sizeof(uint16_t) * 8);
> > > > --
> > > > 2.50.1 (Apple Git-155)
> > > >

Re: [PATCH] drm/amd/pm: Fix incorrect avg vcn utilization in gpu_metrics

Posted by Boqun Feng 1 month, 2 weeks ago

On Thu, Aug 13, 2026 at 08:51:22PM -0400, Alex Deucher wrote:
> On Thu, Aug 13, 2026 at 6:25 PM Boqun Feng <boqun@kernel.org> wrote:
> >
> > On Thu, Aug 13, 2026 at 06:01:47PM -0400, Alex Deucher wrote:
> > > On Thu, Aug 13, 2026 at 5:36 PM Boqun Feng <boqun@kernel.org> wrote:
> > > >
> > > > On Wed, Aug 05, 2026 at 07:02:21AM -0700, Boqun Feng wrote:
> > > > > In a Strix Halo system, a >100 average_vcn_activity in gpu_metrics can
> > > > > be observed by running the following command:
> > > > >
> > > > >     ffmpeg -hwaccel vappi -vappi_device /dev/dri/renderD128 -i \
> > > > >     ~/sample-10s.mp4 -vf hwupload,scale_vappi=format=nv12 -c:v \
> > > > >     h264_vappi /tmp/output.mp4
> > > > >
> > > > > This is incorrect because the value is supposed to be in [0-100] range.
> > > > >
> > > > > The cause of the issue is that the metrics.VcnActivity reported by
> > > > > smu_cmn_get_metrics_table() is a permyriad value instead of a percentage
> > > > > value (e.g. smu_v14_0_0_get_smu_metrics_data() has a division by 100 to
> > > > > report the vcn_busy_percent). Therefore fix this by applying the same
> > > > > division in smu_v14_0_0_get_gpu_metrics().
> > >
> > > I think this is correct as is.  smu_v14_0_0_get_smu_metrics_data() is
> > > used to fetch data for standardized formats like hwmon while
> > > smu_v14_0_0_get_gpu_metrics() is for dumping the raw metrics data.
> > >
> >
> > Well, then kgd_pp_interface.h needs some help?
> >
> > struct gpu_metrics_v3_0 {
> >         ...
> >         /* Utilization */
> >         /* time filtered GFX busy % [0-100] */
> >         uint16_t                        average_gfx_activity;
> >         /* time filtered VCN busy % [0-100] */
> >         uint16_t                        average_vcn_activity;
> >         ...
> > }
> >
> > Clearly it's not true.
> 
> That was likely copy and pasted from the firmware interface
> (smu14_driver_if_v14_0_0.h):
> uint16_t VcnActivity;                //Time filtered VCN busy % [0-100]
> 
> Other generations seem to do the same thing (raw data in metrics table
> and % in the hwmon type interfaces). E.g., smu_v13_0_4_ppt.c:
> smu_v13_0_4_get_gpu_metrics()
> gpu_metrics->average_mm_activity = metrics.UvdActivity;
> vs smu_v13_0_4_get_smu_metrics_data():
> *value = metrics->UvdActivity / 100;
> 

Could you help fix the document while you're at it? I cannot confirm by
myself the valid range of that raw data. Thanks!

Regards,
Boqun

> Alex
> 
> >
> > [Cc amdgpu_top]
> >
> > Regards,
> > Boqun
> >
> > > Alex
> > >
> > > > >
> > > > > Reported-by: Mark Janes <mjanes@netflix.com>
> > > > > Signed-off-by: Boqun Feng <boqun@kernel.org>
> > > >
> > > > Ping?
> > > >
> > > > Regards,
> > > > Boqun
> > > >
> > > > > ---
> > > > >  drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c | 3 ++-
> > > > >  1 file changed, 2 insertions(+), 1 deletion(-)
> > > > >
> > > > > diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c
> > > > > index 568665265a13..1058338344b0 100644
> > > > > --- a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c
> > > > > +++ b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c
> > > > > @@ -566,7 +566,8 @@ static ssize_t smu_v14_0_0_get_gpu_metrics(struct smu_context *smu,
> > > > >       gpu_metrics->temperature_skin = metrics.SkinTemp;
> > > > >
> > > > >       gpu_metrics->average_gfx_activity = metrics.GfxActivity;
> > > > > -     gpu_metrics->average_vcn_activity = metrics.VcnActivity;
> > > > > +     /* metrics.VcnActivity is permyriad, convert it to percentage. */
> > > > > +     gpu_metrics->average_vcn_activity = metrics.VcnActivity / 100;
> > > > >       memcpy(&gpu_metrics->average_ipu_activity[0],
> > > > >               &metrics.IpuBusy[0],
> > > > >               sizeof(uint16_t) * 8);
> > > > > --
> > > > > 2.50.1 (Apple Git-155)
> > > > >