[PATCH] HID: sony: fix UAF of ghl_poke_timer / ghl_urb at driver unbind

Doruk Tan Ozturk posted 1 patch 7 hours ago
There is a newer version of this series
drivers/hid/hid-sony.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
[PATCH] HID: sony: fix UAF of ghl_poke_timer / ghl_urb at driver unbind
Posted by Doruk Tan Ozturk 7 hours ago
For GHL (Guitar Hero Live) dongles, sony_probe() arms a periodic timer:
ghl_magic_poke() (the timer callback) submits sc->ghl_urb, and the URB
completion ghl_magic_poke_cb() re-arms the timer with mod_timer().

sony_remove() drained the timer with timer_delete_sync() and then freed
the URB with usb_free_urb():

	timer_delete_sync(&sc->ghl_poke_timer);
	usb_free_urb(sc->ghl_urb);

timer_delete_sync() does not block re-arming, and while the URB is in
flight the timer is not pending, so the sync delete is a no-op. A URB
completion that runs after the delete re-arms the timer, and usb_free_urb()
only drops a reference -- it does not kill an in-flight URB. sc is
allocated with devm_kzalloc() and freed once sony_remove() returns, so the
re-armed ghl_poke_timer (embedded in sc) then fires on freed memory, a
use-after-free from timer softirq. This is a disconnect/rmmod race.

Kill the URB first so no completion can re-arm the timer (further
usb_submit_urb() from the callback then fails), then timer_shutdown_sync()
to drain any last callback and permanently block re-arming, before freeing
the URB. The probe error path is unaffected: it is only reached before the
timer is armed.

Reproduced under KASAN on next-20260710 via dummy_hcd + raw-gadget
emulation of the GHL PS4 dongle (VID 0x1430 / PID 0x07bb): hid-sony binds
and arms the poke timer, the poke URB is held in flight, the driver is
unbound (freeing sc), then the URB is released. The completion re-arms the
timer on the freed sc, and the re-armed timer fires ~8 s later:

  BUG: KASAN: slab-use-after-free in ghl_magic_poke+0x98/0xb0
  Read of size 8 at addr ffff88810b02fd50 by task swapper/0/0
   ghl_magic_poke+0x98/0xb0
   call_timer_fn+0x35/0x2b0
   __run_timers+0x69c/0x9a0
   run_timer_softirq+0x173/0x2a0
  Allocated by task 169:  sony_probe
  Freed by task 338:      devres_release_group <- hid_device_remove (sony_remove)

Found by 0sec (https://0sec.ai) using automated source analysis.

Fixes: cc894ac55360 ("HID: sony: support for ghlive ps3/wii u dongles")
Cc: stable@vger.kernel.org
Assisted-by: 0sec:multi-model
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
---
 drivers/hid/hid-sony.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 253fff4066eb..5f9670f3910a 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -2431,7 +2431,19 @@ static void sony_remove(struct hid_device *hdev)
 	struct sony_sc *sc = hid_get_drvdata(hdev);
 
 	if (sc->quirks & (GHL_GUITAR_PS3WIIU | GHL_GUITAR_PS4)) {
-		timer_delete_sync(&sc->ghl_poke_timer);
+		/*
+		 * ghl_magic_poke() resubmits sc->ghl_urb from the poke timer
+		 * and its completion ghl_magic_poke_cb() re-arms the timer, so
+		 * an in-flight URB can re-arm the timer after a plain
+		 * timer_delete_sync() (a no-op while the URB is in flight and
+		 * the timer is not pending).  sc is devm-allocated and freed
+		 * once sony_remove() returns, so the re-armed timer would fire
+		 * on freed memory.  Kill the URB first so no completion can
+		 * re-arm the timer, then timer_shutdown_sync() to drain it and
+		 * permanently block further re-arming.
+		 */
+		usb_kill_urb(sc->ghl_urb);
+		timer_shutdown_sync(&sc->ghl_poke_timer);
 		usb_free_urb(sc->ghl_urb);
 	}
 
-- 
2.43.0