Add nodes for uart10/11/12/13.

Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
---
Changes in v2:
- rebase on bmc/linux.git aspeed/arm/dt, no functional changes
- Link to v1: https://lore.kernel.org/r/20260327-upstream_g6_dts_uart-v1-1-26e72b47bc97@aspeedtech.com
---
 arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 56 +++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index edf4b74f5ab..fb21e353005 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -844,6 +844,62 @@ uart9: serial@1e790300 {
 				status = "disabled";
 			};
 
+			uart10: serial@1e790400 {
+				compatible = "ns16550a";
+				reg = <0x1e790400 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART10CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart10_default>;
+
+				status = "disabled";
+			};
+
+			uart11: serial@1e790500 {
+				compatible = "ns16550a";
+				reg = <0x1e790500 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART11CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart11_default>;
+
+				status = "disabled";
+			};
+
+			uart12: serial@1e790600 {
+				compatible = "ns16550a";
+				reg = <0x1e790600 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART12CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart12g1_default>;
+
+				status = "disabled";
+			};
+
+			uart13: serial@1e790700 {
+				compatible = "ns16550a";
+				reg = <0x1e790700 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART13CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart13g1_default>;
+
+				status = "disabled";
+			};
+
 			bus@1e78a000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;

---
base-commit: 749c34389679f8d56cb200a69b62f9a64670034f
change-id: 20260327-upstream_g6_dts_uart-78a5ce3b2873

Best regards,
-- 
Jammy Huang <jammy_huang@aspeedtech.com>