Add support for the Monolithic Power Systems MPQ8646 step-down
converter as a PMBus device.
1/3 pmbus core: add and export pmbus_get_hwmon_device() so a chip
driver can call hwmon_notify_event() from an in-driver
alarm-poll fallback (lm90-style) on boards where the chip's
SMBALERT# pin is unavailable to the CPU.
2/3 dt-bindings: the MPQ8646 binding; schema inspired from the
mpq8785 (same mps,vout-fb-divider-ratio-permille property).
3/3 the MPQ8646 driver: PMBus telemetry plus MFR_CFG_EXT
gate-close retry after CLEAR_LAST_FAULT, alarm acknowledge via
inX_reset_history, MPS-extended STATUS_WORD decode and
post-mortem clear, the alarm-poll fallback for boards without
SMBALERT, and on_off_config / vout_margin / mfr_pmbus_lock
sysfs.
Signed-off-by: Vincent Jardin <vjardin@free.fr>
---
Changes in v2:
- driver: register debugfs only after the DT-property validation, to
avoid an early probe error to avoid dangling debugfs entries
- driver: do not schedule the alarm-poll worker when SMBALERT# (irq)
is wired, and do not re-arm it from the worker in that case
- driver: dput() the dentry returned by debugfs_lookup()
- driver: hold mps_lock around the nvmem snapshot reads
- driver: fix VID coefficients comment
- dt-bindings: fix typo of the commit message
- Link to v1: https://lore.kernel.org/r/20260723-mpq8646_v0-v1-0-14363c75916f@free.fr
---
Vincent Jardin (3):
hwmon: pmbus: event notification with alarms
dt-bindings: hwmon: pmbus: add MPS MPQ8646 binding
hwmon: pmbus: add MPQ8646 driver
.../bindings/hwmon/pmbus/mps,mpq8646.yaml | 50 +
Documentation/hwmon/mpq8646.rst | 314 +++++
MAINTAINERS | 8 +
drivers/hwmon/pmbus/Kconfig | 11 +
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/mpq8646.c | 1223 ++++++++++++++++++++
drivers/hwmon/pmbus/pmbus.h | 1 +
drivers/hwmon/pmbus/pmbus_core.c | 8 +
8 files changed, 1616 insertions(+)
---
base-commit: 248951ddc14de84de3910f9b13f51491a8cd91df
change-id: 20260723-mpq8646_v0-3383cb574d7a
Best regards,
--
Vincent Jardin <vjardin@free.fr>