qoriq_tmu_resume() enables the TMU clock before clearing the
power-down bit and enabling monitoring.

If either register update fails, the function returns with the clock
still enabled. This leaves the clock enable count unbalanced after a
failed resume.

Disable the clock on those failure paths before returning the error.

Fixes: 51904045d4aa ("thermal: qoriq: Add clock operations")
Cc: stable@vger.kernel.org
Signed-off-by: Can Peng <pengcan@kylinos.cn>
---
 drivers/thermal/qoriq_thermal.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 35439ec5f8bc..297724e81593 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -415,11 +415,20 @@ static int qoriq_tmu_resume(struct device *dev)
 	if (data->ver > TMU_VER1) {
 		ret = regmap_clear_bits(data->regmap, REGS_TMR, TMR_CMD);
 		if (ret)
-			return ret;
+			goto disable_clk;
 	}
 
 	/* Enable monitoring */
-	return regmap_update_bits(data->regmap, REGS_TMR, TMR_ME, TMR_ME);
+	ret = regmap_update_bits(data->regmap, REGS_TMR, TMR_ME, TMR_ME);
+	if (ret)
+		goto disable_clk;
+
+	return 0;
+
+disable_clk:
+	clk_disable_unprepare(data->clk);
+
+	return ret;
 }
 
 static DEFINE_SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
-- 
2.53.0