Qualcomm Kalambo is a Mahua derivative with CPU cluster 0 absent,
leaving it with just cluster 1. Everything else should work as-is.

This series documents the board compatibles and adds the SoC and
Compute Reference Device (CRD) device trees. It also adds the Kalambo
compatible to the UBWC configuration table and allowlists the Kalambo
CRD for QSEECOM to enable access to efivars.

---
Changes in v2:
- Fix the cpu-map and SCMI perf domain for the single cluster.
- Give the SCP shared-memory window its own IMEM section.
- Rebased on next-20260721.
- Picked up R-b tags.
- Link to v1: https://patch.msgid.link/20260718-b4-kalambo-crd-v1-0-a1069b5a2757@oss.qualcomm.com

---
Gopikrishna Garmidi (5):
      dt-bindings: arm: qcom: Document Kalambo SoC and board
      arm64: dts: qcom: Add Kalambo SoC
      arm64: dts: qcom: Add Kalambo CRD
      firmware: qcom: scm: Allow QSEECOM on Kalambo CRD
      soc: qcom: ubwc: Add Kalambo UBWC config

 Documentation/devicetree/bindings/arm/qcom.yaml |  5 ++
 arch/arm64/boot/dts/qcom/Makefile               |  1 +
 arch/arm64/boot/dts/qcom/glymur.dtsi            |  6 +-
 arch/arm64/boot/dts/qcom/kalambo-crd.dts        | 21 ++++++
 arch/arm64/boot/dts/qcom/kalambo.dtsi           | 95 +++++++++++++++++++++++++
 drivers/firmware/qcom/qcom_scm.c                |  1 +
 drivers/soc/qcom/ubwc_config.c                  |  1 +
 7 files changed, 127 insertions(+), 3 deletions(-)
---
base-commit: 290aaf24a551d5a0dce037e3fab30820f9113a10
change-id: 20260715-b4-kalambo-crd-86912a03bbd2

Best regards,
--  
Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>