From: surendra <kr494167@gmail.com>
lp5860_device_init() unlocks lp->lock after updating the device mode.
An lp5860_init_dt() failure then jumps to err_disable, which attempts to
unlock the mutex a second time before disabling the chip.
Unlock immediately after the register update and keep the common error
handler lockless.
Fixes: f0a66563aa2d ("leds: Add support for TI LP5860 LED driver chip")
Signed-off-by: surendra <kr494167@gmail.com>
---
drivers/leds/rgb/leds-lp5860-core.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/leds/rgb/leds-lp5860-core.c b/drivers/leds/rgb/leds-lp5860-core.c
index fd0e2f6e6e0f..e21d5f2302be 100644
--- a/drivers/leds/rgb/leds-lp5860-core.c
+++ b/drivers/leds/rgb/leds-lp5860-core.c
@@ -204,9 +204,9 @@ int lp5860_device_init(struct device *dev)
mutex_lock(&lp->lock);
ret = regmap_update_bits(lp->regmap, LP5860_REG_DEV_INITIAL, LP5860_MODE_MASK,
LP5860_MODE_1 << LP5860_MODE_SHIFT);
+ mutex_unlock(&lp->lock);
if (ret)
goto err_disable;
- mutex_unlock(&lp->lock);
ret = lp5860_init_dt(lp);
if (ret)
@@ -215,7 +215,6 @@ int lp5860_device_init(struct device *dev)
return 0;
err_disable:
- mutex_unlock(&lp->lock);
lp5860_chip_enable(lp, LP5860_CHIP_DISABLE);
return ret;
}
--
2.55.0