mpu3050_drdy_trigger_set_state() calls pm_runtime_get_sync() when the
trigger is enabled, but several error paths in the enable branch return
directly without dropping the usage counter again. pm_runtime_get_sync()
increments the usage counter, so every failed enable leaks a runtime PM
reference and the device can no longer autosuspend. The driver state flag
hw_irq_trigger is also left set after a failed enable.

Jump to a common error label that drops the reference and clears
hw_irq_trigger, mirroring the disable path. The success path deliberately
keeps the reference, as the device must stay resumed while the trigger is
active.

Signed-off-by: Biren Pandya <birenpandya@gmail.com>
---
Changes in v4:
- Reverted stray change converting `mpu3050_read_mem()` kernel-doc to a regular comment.
- Dropped AI assistance tag from the commit message.
Changes in v3:
- Changed to a unified error label instead of individual drops.
Changes in v2:
- Fixed a missed PM release in the first error branch.

 drivers/iio/gyro/mpu3050-core.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/gyro/mpu3050-core.c b/drivers/iio/gyro/mpu3050-core.c
index d84e04e4b4314..783be9a786df0 100644
--- a/drivers/iio/gyro/mpu3050-core.c
+++ b/drivers/iio/gyro/mpu3050-core.c
@@ -994,14 +994,14 @@ static int mpu3050_drdy_trigger_set_state(struct iio_trigger *trig,
 		/* Disable all things in the FIFO */
 		ret = regmap_write(mpu3050->map, MPU3050_FIFO_EN, 0);
 		if (ret)
-			return ret;
+			goto err_power_down;
 
 		/* Reset and enable the FIFO */
 		ret = regmap_set_bits(mpu3050->map, MPU3050_USR_CTRL,
 				      MPU3050_USR_CTRL_FIFO_EN |
 				      MPU3050_USR_CTRL_FIFO_RST);
 		if (ret)
-			return ret;
+			goto err_power_down;
 
 		mpu3050->pending_fifo_footer = false;
 
@@ -1013,12 +1013,12 @@ static int mpu3050_drdy_trigger_set_state(struct iio_trigger *trig,
 				   MPU3050_FIFO_EN_GYRO_ZOUT |
 				   MPU3050_FIFO_EN_FOOTER);
 		if (ret)
-			return ret;
+			goto err_power_down;
 
 		/* Configure the sample engine */
 		ret = mpu3050_start_sampling(mpu3050);
 		if (ret)
-			return ret;
+			goto err_power_down;
 
 		/* Clear IRQ flag */
 		ret = regmap_read(mpu3050->map, MPU3050_INT_STATUS, &val);
@@ -1037,10 +1037,16 @@ static int mpu3050_drdy_trigger_set_state(struct iio_trigger *trig,
 
 		ret = regmap_write(mpu3050->map, MPU3050_INT_CFG, val);
 		if (ret)
-			return ret;
+			goto err_power_down;
 	}
 
 	return 0;
+
+err_power_down:
+	pm_runtime_put_autosuspend(mpu3050->dev);
+	mpu3050->hw_irq_trigger = false;
+
+	return ret;
 }
 
 static const struct iio_trigger_ops mpu3050_trigger_ops = {
-- 
2.50.1 (Apple Git-155)

On Fri, 17 Jul 2026 23:40:48 +0530
Biren Pandya <birenpandya@gmail.com> wrote:

> mpu3050_drdy_trigger_set_state() calls pm_runtime_get_sync() when the
> trigger is enabled, but several error paths in the enable branch return
> directly without dropping the usage counter again. pm_runtime_get_sync()
> increments the usage counter, so every failed enable leaks a runtime PM
> reference and the device can no longer autosuspend. The driver state flag
> hw_irq_trigger is also left set after a failed enable.
> 
> Jump to a common error label that drops the reference and clears
> hw_irq_trigger, mirroring the disable path. The success path deliberately
> keeps the reference, as the device must stay resumed while the trigger is
> active.
> 
> Signed-off-by: Biren Pandya <birenpandya@gmail.com>
Never send a new version in reply to an old one.  It both leads to confusing
threads and also generally increases the time before a reviewer or maintainer
will look at it. 

We mostly work backwards through our inboxes because old stuff is often
resolved in later threads!

> ---
> Changes in v4:
> - Reverted stray change converting `mpu3050_read_mem()` kernel-doc to a regular comment.
> - Dropped AI assistance tag from the commit message.
> Changes in v3:
> - Changed to a unified error label instead of individual drops.
> Changes in v2:
> - Fixed a missed PM release in the first error branch.
> 
>  drivers/iio/gyro/mpu3050-core.c | 16 +++++++++++-----
>  1 file changed, 11 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/iio/gyro/mpu3050-core.c b/drivers/iio/gyro/mpu3050-core.c
> index d84e04e4b4314..783be9a786df0 100644
> --- a/drivers/iio/gyro/mpu3050-core.c
> +++ b/drivers/iio/gyro/mpu3050-core.c
> @@ -994,14 +994,14 @@ static int mpu3050_drdy_trigger_set_state(struct iio_trigger *trig,

If touching this code, can we also check for errors from the pm_runtime_get_sync().

A number of paths were cleaned up in
acc3949aab3e ("iio: gyro: mpu3050-core: fix pm_runtime error handling")
but oddly not this one.  Antoniu any idea why you didn't address this one?


>  		/* Disable all things in the FIFO */
>  		ret = regmap_write(mpu3050->map, MPU3050_FIFO_EN, 0);
>  		if (ret)
> -			return ret;
> +			goto err_power_down;
>  
>  		/* Reset and enable the FIFO */
>  		ret = regmap_set_bits(mpu3050->map, MPU3050_USR_CTRL,
>  				      MPU3050_USR_CTRL_FIFO_EN |
>  				      MPU3050_USR_CTRL_FIFO_RST);
>  		if (ret)
> -			return ret;
> +			goto err_power_down;
>  
>  		mpu3050->pending_fifo_footer = false;
>  
> @@ -1013,12 +1013,12 @@ static int mpu3050_drdy_trigger_set_state(struct iio_trigger *trig,
>  				   MPU3050_FIFO_EN_GYRO_ZOUT |
>  				   MPU3050_FIFO_EN_FOOTER);
>  		if (ret)
> -			return ret;
> +			goto err_power_down;
>  
>  		/* Configure the sample engine */
>  		ret = mpu3050_start_sampling(mpu3050);
>  		if (ret)
> -			return ret;
> +			goto err_power_down;
>  
>  		/* Clear IRQ flag */
>  		ret = regmap_read(mpu3050->map, MPU3050_INT_STATUS, &val);
> @@ -1037,10 +1037,16 @@ static int mpu3050_drdy_trigger_set_state(struct iio_trigger *trig,
>  
>  		ret = regmap_write(mpu3050->map, MPU3050_INT_CFG, val);
>  		if (ret)
> -			return ret;
> +			goto err_power_down;
>  	}
>  
>  	return 0;
> +
> +err_power_down:
> +	pm_runtime_put_autosuspend(mpu3050->dev);
> +	mpu3050->hw_irq_trigger = false;
> +
> +	return ret;
>  }
>  
>  static const struct iio_trigger_ops mpu3050_trigger_ops = {