[PATCH v7 0/2] Enable audio support for J721S2 EVM

Moteen Shah posted 2 patches 1 week ago
.../bindings/clock/ti,am62-audio-refclk.yaml  |   8 +-
.../soc/ti/ti,j721e-system-controller.yaml    |   6 +-
arch/arm64/boot/dts/ti/Makefile               |   4 +
.../boot/dts/ti/k3-j721s2-evm-audio.dtso      | 157 ++++++++++++++++++
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi    |   9 +
5 files changed, 180 insertions(+), 4 deletions(-)
create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-evm-audio.dtso
[PATCH v7 0/2] Enable audio support for J721S2 EVM
Posted by Moteen Shah 1 week ago
Earlier version of the patchset sent upstream[0] was rejected as
its dependency[1], which resolves the DTBS check errors introduced
by [0] also got rejected on the grounds of ABI breakage.

Another solution to fix the DTBS check errors introduced by [0] is
to modify the ti,j721e-system-controller.yaml binding to allow
audio-refclk as clock-controller child. This is done in the first
patch of this series.

Changes since v6:
- Fix commit message in patch 2/2: split the I2C3 and McASP routing
  bullet to correctly describe I2C3 routing via gpio-mux controller
  and McASP serializer routing via GPIO hogs as separate items
- Add Reviewed-by from Sen

Changes since v5:
Link to v5:
https://lore.kernel.org/all/20260520115603.2662930-1-m-shah@ti.com/
- Move audio_refclk1 clock node from the overlay (k3-j721s2-evm-audio.dtso)
  to the main DTSI (k3-j721s2-main.dtsi) so it is always available
  independent of the overlay being applied
- Drop the &scm_conf block from the overlay since it is now in main.dtsi

Changes since v4:
Link to v4:
https://lore.kernel.org/all/20260519142341.2531948-1-m-shah@ti.com/
- Explicitly disable main_mcan3 and main_mcan5 as they will silently
  break mcasp audio routing

Link to v3:
https://lore.kernel.org/all/20260330094459.128648-1-m-shah@ti.com/
Link to v2:
https://lore.kernel.org/all/20260205130707.2033197-1-m-shah@ti.com/
Link to v1:
https://lore.kernel.org/all/20260112104536.83309-1-m-shah@ti.com/
Bootlogs:
https://gist.github.com/Jamm02/f586087dad227450abe8637e8a688c68

[0]: https://lore.kernel.org/linux-arm-kernel/20250604104656.38752-1-j-choudhary@ti.com/
[1]: https://lore.kernel.org/all/20250603095609.33569-4-j-choudhary@ti.com/

Jayesh Choudhary (1):
  arm64: dts: ti: Add audio overlay for k3-j721s2-evm

Moteen Shah (1):
  dt-bindings: ti: Update audio-refclk binding and j721e system
    controller

 .../bindings/clock/ti,am62-audio-refclk.yaml  |   8 +-
 .../soc/ti/ti,j721e-system-controller.yaml    |   6 +-
 arch/arm64/boot/dts/ti/Makefile               |   4 +
 .../boot/dts/ti/k3-j721s2-evm-audio.dtso      | 157 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi    |   9 +
 5 files changed, 180 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-evm-audio.dtso

-- 
2.34.1