The Kandou KB9002 is an 8-lane PCIe 5.0 retimer with an integrated
microcontroller that exposes an SMBus 3.0 target (with mandatory PEC)
on its sideband interface. Its firmware aggregates per-lane die
temperatures and publishes the maximum through a register window.
This series adds a hwmon driver for it. The driver reports the
aggregated maximum die temperature as temp1_input, and exposes the
running firmware version and boot status under debugfs.
The series is organised as:
1/4 add the "kandou" vendor prefix
2/4 device tree binding for the retimer
3/4 the driver, Kconfig/Makefile and MAINTAINERS entry
4/4 hwmon documentation
Signed-off-by: Andy Chung <Andy.Chung@amd.com>
---
Changes in v2:
- Drop the unconditional I2C_FUNC_I2C requirement at probe; require raw
I2C only in the host-interface switch path, so the driver loads on
SMBus-only adapters when the chip is already strapped to SMBus.
- kb9002_read_revid(): return immediately on a hard I2C read error
instead of retrying the FIFO drain, avoiding needless bus traffic when
the device is absent.
- Link to v1: https://lore.kernel.org/all/20260714-kb9002-upstream-v1-0-8fd2f0b135d8@amd.com
---
Andy Chung (4):
dt-bindings: Add vendor prefix for Kandou
dt-bindings: hwmon: Add Kandou KB9002
hwmon: (kb9002) Add driver for Kandou KB9002 retimer
hwmon: (kb9002) Add documentation
.../devicetree/bindings/hwmon/kandou,kb9002.yaml | 45 ++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/kb9002.rst | 65 +++
MAINTAINERS | 8 +
drivers/hwmon/Kconfig | 11 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/kb9002.c | 479 +++++++++++++++++++++
8 files changed, 612 insertions(+)
---
base-commit: ca078d004cf58137bcf8cb24a8b271397431ba58
change-id: 20260713-kb9002-upstream-06c686e37833
Best regards,
--
Andy Chung <Andy.Chung@amd.com>