This series implements support for the RISC-V IOMMU hardware performance
monitor.

The RISC-V IOMMU PMU driver is implemented as an auxiliary device driver
created by the parent RISC-V IOMMU driver. Therefore, the child driver
can obtain resources and information from the parent device, such as
the MMIO base address and IRQ number.

Changed in v2:
- Rebased onto v7.2-rc1
- Use hi-lo-hi mechanism to read counter.
  Suggested by Guo Ren and David Laight

Changed in v1:
- Rebased onto v6.19-rc8
- Pick all suggestions and feedbacks from v1 series
- Add cpu hotplug implementation to avoid race enablement
- Move PMU-related definition from header to c file
- Change PMU driver to auxiliary device driver

Changed in RFC:
- Rebase onto v6.13-rc7
- Clear interrupt pending before handling interrupt
- Fix the counter value issue caused by OF bit in the cycle counter.
- Invoke riscv_iommu_hpm_disable() instead of riscv_iommu_pmu_uninit()
  in riscv_iommu_remove()

Zong Li (2):
  drivers/perf: riscv-iommu: add risc-v iommu pmu driver
  iommu/riscv: create a auxiliary device for HPM

 drivers/iommu/riscv/iommu-bits.h |  61 ---
 drivers/iommu/riscv/iommu.c      |  19 +
 drivers/perf/Kconfig             |  12 +
 drivers/perf/Makefile            |   1 +
 drivers/perf/riscv_iommu_pmu.c   | 703 +++++++++++++++++++++++++++++++
 5 files changed, 735 insertions(+), 61 deletions(-)
 create mode 100644 drivers/perf/riscv_iommu_pmu.c

-- 
2.43.7