From: Mohit Dsor <mohit.dsor@oss.qualcomm.com>
Subject: [PATCH 0/4] LT9611C improvements and fixes updates

Hi,

This series contains improvements and fixes for the Lontium LT9611C
MIPI DSI to HDMI bridge driver, along with DT binding updates.

The key addition is support for selecting the DSI input port using
a new device tree property, which is required for configurations
using port B or dual-port (A+B) operation.

Summary of changes:
- Add DSI port selection support via DT property
- Fixes and improvements
- Increase MCU polling timeout for stability

- Add dt-binding for port configuration

Patches:

1. dt-bindings: bridge: lt9611c: add port-select property for LT9611C
2. drm/bridge: lontium-lt9611c: Increase MCU poll timeout to 200ms
3. drm-bridge: lontium lt9611c: fixes and improvements
4. drm/bridge: lontium-lt9611c: Add DSI port selection via DT property

This has been tested on LT9611C-based platforms.
Please review.

Thanks,
Mohit

Signed-off-by: Mohit Dsor <mohit.dsor@oss.qualcomm.com>
---
Mohit Dsor (4):
      dt-bindings: brige: lt9611c: add port-select property for LT9611C
      drm/bridge: lontium-lt9611c: Increase MCU poll timeout to 200ms
      drm-bridge: lontium lt9611c: fixes and improvements
      drm/bridge: lontium-lt9611c: Add DSI port selection via DT property

 .../bindings/display/bridge/lontium,lt9611.yaml    | 13 ++++
 drivers/gpu/drm/bridge/lontium-lt9611c.c           | 79 ++++++++++++++++++++--
 2 files changed, 85 insertions(+), 7 deletions(-)
---
base-commit: 7b61c580d964f499f3eaf96d6579a7127dda606b
change-id: 20260611-lt9611-b4-send-6f1d39c2d6d7
prerequisite-message-id: <20260420061644.1251070-1-syyang@lontium.com>
prerequisite-patch-id: 5e0ea8907c87174a28fac5456fc51183d8e8b36f
prerequisite-patch-id: 6fd8685174c2c83b8871d9e6419c6f3bd29ccc1a

Best regards,
--  
Mohit Dsor <mohit.dsor@oss.qualcomm.com>