From: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>

Technically, the reset signal is active low - it's called RST_n after all.

But it is ignored completely unless RST_n_FUNCTION=1 (byte 162 in extcsd)
is set in the emmc. It is 0 per default.

For emmcs that have RST_n_FUNCTION=1 we failed like this:

	[    3.074480] mmc1: Failed to initialize a non-removable card

With this change they work normally.

Cc: stable@vger.kernel.org
Fixes: bb510ddc9d3e ("arm64: dts: rockchip: add px30-cobra base dtsi and board variants")
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
---
v2: Add correct "From: " line

 arch/arm64/boot/dts/rockchip/px30-cobra.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/px30-cobra.dtsi b/arch/arm64/boot/dts/rockchip/px30-cobra.dtsi
index b7e669d8ba4d..90751b04f95c 100644
--- a/arch/arm64/boot/dts/rockchip/px30-cobra.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-cobra.dtsi
@@ -35,7 +35,7 @@ emmc_pwrseq: emmc-pwrseq {
 		compatible = "mmc-pwrseq-emmc";
 		pinctrl-0 = <&emmc_reset>;
 		pinctrl-names = "default";
-		reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_LOW>;
 	};
 
 	gpio-leds {
-- 
2.47.3

Hi Jakob,

On 6/9/26 10:17 AM, Jakob Unterwurzacher wrote:
> From: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
> 
> Technically, the reset signal is active low - it's called RST_n after all.
> 
> But it is ignored completely unless RST_n_FUNCTION=1 (byte 162 in extcsd)
> is set in the emmc. It is 0 per default.
> 
> For emmcs that have RST_n_FUNCTION=1 we failed like this:
> 
> 	[    3.074480] mmc1: Failed to initialize a non-removable card
> 
> With this change they work normally.
> 
> Cc: stable@vger.kernel.org
> Fixes: bb510ddc9d3e ("arm64: dts: rockchip: add px30-cobra base dtsi and board variants")

Tested-by: Quentin Schulz <quentin.schulz@cherry.de>

Thanks!
Quentin

Hi Jakob,

On 6/9/26 10:17 AM, Jakob Unterwurzacher wrote:
> From: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
> 
> Technically, the reset signal is active low - it's called RST_n after all.
> 
> But it is ignored completely unless RST_n_FUNCTION=1 (byte 162 in extcsd)
> is set in the emmc. It is 0 per default.
> 
> For emmcs that have RST_n_FUNCTION=1 we failed like this:
> 
> 	[    3.074480] mmc1: Failed to initialize a non-removable card
> 
> With this change they work normally.
> 
> Cc: stable@vger.kernel.org
> Fixes: bb510ddc9d3e ("arm64: dts: rockchip: add px30-cobra base dtsi and board variants")
> Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>

Please try to not forget to add tags (Reviewed-by, Acked-by, Tested-by, 
...) given in earlier versions of a newer version of the patch (except 
if substantial changes were made, which isn't the case here).

Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>

Thanks!
Quentin