If mixel_lvds_phy_reset() fails in probe after pm_runtime_enable(),
the function returns directly without calling pm_runtime_disable(),
leaving runtime PM permanently enabled for the device.

Fix this by using devm_pm_runtime_enable() so that cleanup is
automatic on any probe failure or driver unbind. This also allows
removing the manual err label and the .remove callback.

Fixes: 06ff622d61d2 ("phy: freescale: Add i.MX8qm Mixel LVDS PHY support")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
---
 drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c | 24 +++++++-----------------
 1 file changed, 7 insertions(+), 17 deletions(-)

diff --git a/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c b/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c
index ece357443521..c662f91e598c 100644
--- a/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c
+++ b/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c
@@ -345,7 +345,9 @@ static int mixel_lvds_phy_probe(struct platform_device *pdev)
 
 	dev_set_drvdata(dev, priv);
 
-	pm_runtime_enable(dev);
+	ret = devm_pm_runtime_enable(dev);
+	if (ret)
+		return ret;
 
 	ret = mixel_lvds_phy_reset(dev);
 	if (ret) {
@@ -355,17 +357,15 @@ static int mixel_lvds_phy_probe(struct platform_device *pdev)
 
 	for (i = 0; i < PHY_NUM; i++) {
 		lvds_phy = devm_kzalloc(dev, sizeof(*lvds_phy), GFP_KERNEL);
-		if (!lvds_phy) {
-			ret = -ENOMEM;
-			goto err;
-		}
+		if (!lvds_phy)
+			return -ENOMEM;
 
 		phy = devm_phy_create(dev, NULL, &mixel_lvds_phy_ops);
 		if (IS_ERR(phy)) {
 			ret = PTR_ERR(phy);
 			dev_err(dev, "failed to create PHY for channel%d: %d\n",
 				i, ret);
-			goto err;
+			return ret;
 		}
 
 		lvds_phy->phy = phy;
@@ -379,19 +379,10 @@ static int mixel_lvds_phy_probe(struct platform_device *pdev)
 	if (IS_ERR(phy_provider)) {
 		ret = PTR_ERR(phy_provider);
 		dev_err(dev, "failed to register PHY provider: %d\n", ret);
-		goto err;
+		return ret;
 	}
 
 	return 0;
-err:
-	pm_runtime_disable(dev);
-
-	return ret;
-}
-
-static void mixel_lvds_phy_remove(struct platform_device *pdev)
-{
-	pm_runtime_disable(&pdev->dev);
 }
 
 static int __maybe_unused mixel_lvds_phy_runtime_suspend(struct device *dev)
@@ -432,7 +423,6 @@ MODULE_DEVICE_TABLE(of, mixel_lvds_phy_of_match);
 
 static struct platform_driver mixel_lvds_phy_driver = {
 	.probe = mixel_lvds_phy_probe,
-	.remove = mixel_lvds_phy_remove,
 	.driver = {
 		.pm = &mixel_lvds_phy_pm_ops,
 		.name = "mixel-lvds-phy",

---
base-commit: a225caacc36546a09586e3ece36c0313146e7da9
change-id: 20260604-lvds-d67cb619df17

Best regards,
--  
Felix Gu <ustc.gu@gmail.com>

On Thu, Jun 04, 2026 at 10:39:07PM +0800, Felix Gu wrote:
> If mixel_lvds_phy_reset() fails in probe after pm_runtime_enable(),
> the function returns directly without calling pm_runtime_disable(),
> leaving runtime PM permanently enabled for the device.
> 
> Fix this by using devm_pm_runtime_enable() so that cleanup is
> automatic on any probe failure or driver unbind. This also allows
> removing the manual err label and the .remove callback.
> 
> Fixes: 06ff622d61d2 ("phy: freescale: Add i.MX8qm Mixel LVDS PHY support")
> Signed-off-by: Felix Gu <ustc.gu@gmail.com>
> ---
>  drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c | 24 +++++++-----------------
>  1 file changed, 7 insertions(+), 17 deletions(-)

It would be good if the patch subject prefix can be changed to
"phy: freescale: phy-fsl-imx8qm-lvds-phy:".

With that done:
Acked-by: Liu Ying <victor.liu@nxp.com>

-- 
Regards,
Liu Ying