Add USB ID 2357:0607 for TP-Link TL-UB250.

This is a Realtek RTL8761BUV based Bluetooth adapter.

Without this entry the device is picked up by the generic Bluetooth USB
class match and exposes hci0, but the Realtek setup path is not used and
rtl8761bu firmware/config are not loaded.

The controller reports Realtek Semiconductor Corporation as the
manufacturer and LMP subversion 0x8761. With this entry added, btusb
loads rtl_bt/rtl8761bu_fw.bin and rtl_bt/rtl8761bu_config.bin
successfully.

Relevant part of /sys/kernel/debug/usb/devices:

T:  Bus=01 Lev=02 Prnt=06 Port=00 Cnt=01 Dev#=  9 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2357 ProdID=0607 Rev= 2.00
S:  Product=TP-Link TL-UB250 Adapter
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Use the same flags as the existing TP-Link 2357:0604 entry.

Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Cris <cxs1494089474@gmail.com>
---
Changes in v2:
- Add the relevant /sys/kernel/debug/usb/devices excerpt.
- Drop Cc stable to avoid the checkpatch warning without a Fixes tag.
- Add Reviewed-by from Paul Menzel.

 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 3aef21d4c..3cbb3c22e 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -831,6 +831,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x2357, 0x0604), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x2357, 0x0607), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x2550, 0x8761), .driver_info = BTUSB_REALTEK |
-- 
2.34.1