This is the second series of three on updating the AD5686 driver.
Initially, a big patch series was sent:
https://lore.kernel.org/r/20260422-ad5313r-iio-support-v1-0-ed7dca001d1b@analog.com
Then, the first patch series added fixes and cleanups:
https://lore.kernel.org/linux-iio/20260524-ad5686-fixes-v7-0-b6bf395d08bd@analog.com/
This one is introducing new features:
- Consume optional reset and correct power supplies;
- LDAC GPIO handling (active-low, held low when unused);
- SPI bus sync() implementation for batching multiple transfers;
- Triggered buffer support, leveraging LDAC and sync() to flush
all channel writes atomically;
- Gain control support through the scale property.
Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
---
Rodrigo Alencar (12):
dt-bindings: iio: dac: ad5696: add reset/ldac/gain gpio support
dt-bindings: iio: dac: ad5696: rework on power supplies
dt-bindings: iio: dac: ad5686: add reset/ldac/gain gpio support
dt-bindings: iio: dac: ad5686: rework on power supplies
iio: dac: ad5686: add support for missing power supplies
iio: dac: ad5686: consume optional reset signal
iio: dac: ad5686: add ldac gpio
iio: dac: ad5686: introduce sync operation
iio: dac: ad5686: implement new sync() op for the spi bus
iio: dac: ad5686: add triggered buffer support
iio: dac: ad5686: write_raw: use guard(mutex)()
iio: dac: ad5686: add gain control support
.../devicetree/bindings/iio/dac/adi,ad5686.yaml | 62 +++++-
.../devicetree/bindings/iio/dac/adi,ad5696.yaml | 65 ++++++-
drivers/iio/dac/Kconfig | 2 +
drivers/iio/dac/ad5686-spi.c | 109 ++++++++---
drivers/iio/dac/ad5686.c | 212 +++++++++++++++++++--
drivers/iio/dac/ad5686.h | 29 ++-
drivers/iio/dac/ad5696-i2c.c | 2 +-
7 files changed, 422 insertions(+), 59 deletions(-)
---
base-commit: 3dee3cddb9b2f78447bf1077f3eb8ae0b8251247
change-id: 20260602-ad5686-new-features-e116c04bddb9
Best regards,
--
Rodrigo Alencar <rodrigo.alencar@analog.com>