Convert LM3533 to OF bindings, add missing VIN supply, add support for
setting mapping mode and LED sources based on device tree. 

---
Changes in v2:

schema
- maximum led sources for leds set to 4
- anyOf > oneOf in ALS
- improved ALS descriptions
- adjusted example
drivers
- dropped devm convertion of irq and mfd helpers
- all als configuration moved into lm3533_als_setup
- added regulator/consumer.h
- lm3533_bl_setup set before sysfs_create_group in backlight
- added check if LVLED is valid
- LM3533_REG_OUTPUT_CONF1 > LM3533_REG_OUTPUT_CONF2 for LVLED4 and LVLED5
---

Svyatoslav Ryhel (6):
  dt-bindings: leds: Document TI LM3533 LED controller
  mfd: lm3533: Convert to use OF bindings
  mfd: lm3533: Add support for VIN power supply
  mfd: lm3533: Set DMA mask
  video: backlight: lm3533_bl: Set initial mapping mode from DT
  video: leds: backlight: lm3533: Support getting LED sources from DT

 .../leds/backlight/ti,lm3533-backlight.yaml   |  68 ++++
 .../bindings/leds/ti,lm3533-leds.yaml         |  66 ++++
 .../devicetree/bindings/leds/ti,lm3533.yaml   | 170 ++++++++++
 drivers/iio/light/lm3533-als.c                |  95 +++---
 drivers/leds/leds-lm3533.c                    | 108 +++++--
 drivers/mfd/lm3533-core.c                     | 291 +++++++-----------
 drivers/video/backlight/lm3533_bl.c           | 127 ++++++--
 include/linux/mfd/lm3533.h                    |  53 +---
 8 files changed, 653 insertions(+), 325 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/leds/backlight/ti,lm3533-backlight.yaml
 create mode 100644 Documentation/devicetree/bindings/leds/ti,lm3533-leds.yaml
 create mode 100644 Documentation/devicetree/bindings/leds/ti,lm3533.yaml

-- 
2.51.0