arch/powerpc/configs/44x/warp_defconfig | 2 +- arch/powerpc/configs/ppc44x_defconfig | 2 +- arch/powerpc/platforms/44x/Kconfig | 7 ------- arch/powerpc/platforms/44x/Makefile | 1 - drivers/gpio/Kconfig | 7 +++++++ drivers/gpio/Makefile | 1 + .../platforms/44x/gpio.c => drivers/gpio/gpio-ppc4xx.c | 0 7 files changed, 10 insertions(+), 10 deletions(-) rename arch/powerpc/platforms/44x/gpio.c => drivers/gpio/gpio-ppc4xx.c (100%)
Move the ppc4xx gpio driver out of arch/powerpc/platforms/44x/ into
drivers/gpio/gpio-ppc4xx.c. The driver has no architecture-specific
dependencies and follows the same pattern as other PowerPC GPIO
drivers already in drivers/gpio/ (e.g. gpio-mpc8xxx, gpio-mpc5200).
- Renamed Kconfig symbol from PPC4xx_GPIO to GPIO_PPC4XX
- Updated ppc44x_defconfig and warp_defconfig to use the new symbol
- Marked the new option as tristate (was bool) since the driver
supports module build via module_platform_driver()
- Added COMPILE_TEST support. Needs PPC as clrbits32 is in use.
Assisted-by: OpenCode:BigPickle
Signed-off-by: mangix <mangix@disroot.org>
---
arch/powerpc/configs/44x/warp_defconfig | 2 +-
arch/powerpc/configs/ppc44x_defconfig | 2 +-
arch/powerpc/platforms/44x/Kconfig | 7 -------
arch/powerpc/platforms/44x/Makefile | 1 -
drivers/gpio/Kconfig | 7 +++++++
drivers/gpio/Makefile | 1 +
.../platforms/44x/gpio.c => drivers/gpio/gpio-ppc4xx.c | 0
7 files changed, 10 insertions(+), 10 deletions(-)
rename arch/powerpc/platforms/44x/gpio.c => drivers/gpio/gpio-ppc4xx.c (100%)
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 5757625469c4..380fa15af68d 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -12,7 +12,7 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_EBONY is not set
CONFIG_WARP=y
-CONFIG_PPC4xx_GPIO=y
+CONFIG_GPIO_PPC4XX=y
CONFIG_HZ_1000=y
CONFIG_CMDLINE="ip=on"
# CONFIG_PCI is not set
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index 41c930f74ed4..57a7342232d7 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -22,7 +22,7 @@ CONFIG_GLACIER=y
CONFIG_REDWOOD=y
CONFIG_EIGER=y
CONFIG_YOSEMITE=y
-CONFIG_PPC4xx_GPIO=y
+CONFIG_GPIO_PPC4XX=y
CONFIG_MATH_EMULATION=y
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index fc79f8466933..150813cea945 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -227,13 +227,6 @@ config PPC44x_SIMPLE
help
This option enables the simple PowerPC 44x platform support.
-config PPC4xx_GPIO
- bool "PPC4xx GPIO support"
- depends on 44x
- select GPIOLIB
- help
- Enable gpiolib support for ppc440 based boards
-
# 44x specific CPU modules, selected based on the board above.
config 440EP
bool
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index ca7b1bb442d9..179468a00f5e 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -15,4 +15,3 @@ obj-$(CONFIG_FSP2) += fsp2.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_PPC4xx_HSTA_MSI) += hsta_msi.o
obj-$(CONFIG_PPC4xx_CPM) += cpm.o
-obj-$(CONFIG_PPC4xx_GPIO) += gpio.o
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 020e51e30317..b87d2329900b 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -584,6 +584,13 @@ config GPIO_POLARFIRE_SOC
help
Say yes here to support the GPIO controllers on Microchip FPGAs.
+config GPIO_PPC4XX
+ tristate "PPC4xx GPIO support"
+ depends on 44x || (PPC && COMPILE_TEST)
+ select GPIO_GENERIC
+ help
+ Enable gpiolib support for ppc440 based boards.
+
config GPIO_PXA
bool "PXA GPIO support"
depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index b267598b517d..192242988ecb 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -145,6 +145,7 @@ obj-$(CONFIG_GPIO_PCIE_IDIO_24) += gpio-pcie-idio-24.o
obj-$(CONFIG_GPIO_PCI_IDIO_16) += gpio-pci-idio-16.o
obj-$(CONFIG_GPIO_PISOSR) += gpio-pisosr.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
+obj-$(CONFIG_GPIO_PPC4XX) += gpio-ppc4xx.o
obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o
obj-$(CONFIG_GPIO_POLARFIRE_SOC) += gpio-mpfs.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
diff --git a/arch/powerpc/platforms/44x/gpio.c b/drivers/gpio/gpio-ppc4xx.c
similarity index 100%
rename from arch/powerpc/platforms/44x/gpio.c
rename to drivers/gpio/gpio-ppc4xx.c
--
2.54.0
Le 28/05/2026 à 04:56, Rosen Penev a écrit :
> Move the ppc4xx gpio driver out of arch/powerpc/platforms/44x/ into
> drivers/gpio/gpio-ppc4xx.c. The driver has no architecture-specific
> dependencies and follows the same pattern as other PowerPC GPIO
> drivers already in drivers/gpio/ (e.g. gpio-mpc8xxx, gpio-mpc5200).
>
> - Renamed Kconfig symbol from PPC4xx_GPIO to GPIO_PPC4XX
> - Updated ppc44x_defconfig and warp_defconfig to use the new symbol
> - Marked the new option as tristate (was bool) since the driver
> supports module build via module_platform_driver()
> - Added COMPILE_TEST support. Needs PPC as clrbits32 is in use.
Not only clrbits32() but also setbits32() and in_be32().
On the long run we want to get rid of PPC specific IO helpers, at least
outside arch/powerpc/ , so don't add new instances.
Remove that dependency by switching to ioread32be() which has been
equivalent to in_be32() since commit 894fa235eb4c ("powerpc: inline
iomap accessors"), then implement a local equivalent of
clrbits32()/setbits32()
See for instance:
- qe_setbits_be32() in include/soc/fsl/qe/qe.h
- tsa_clrbits32() in drivers/soc/fsl/qe/tsa.c
>
> Assisted-by: OpenCode:BigPickle
> Signed-off-by: mangix <mangix@disroot.org>
Who is that ?
> ---
> arch/powerpc/configs/44x/warp_defconfig | 2 +-
> arch/powerpc/configs/ppc44x_defconfig | 2 +-
> arch/powerpc/platforms/44x/Kconfig | 7 -------
> arch/powerpc/platforms/44x/Makefile | 1 -
> drivers/gpio/Kconfig | 7 +++++++
> drivers/gpio/Makefile | 1 +
> .../platforms/44x/gpio.c => drivers/gpio/gpio-ppc4xx.c | 0
Not gpio-ppc4xx.c but gpio-ppc44x.c
> 7 files changed, 10 insertions(+), 10 deletions(-)
> rename arch/powerpc/platforms/44x/gpio.c => drivers/gpio/gpio-ppc4xx.c (100%)
>
> diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
> index 5757625469c4..380fa15af68d 100644
> --- a/arch/powerpc/configs/44x/warp_defconfig
> +++ b/arch/powerpc/configs/44x/warp_defconfig
> @@ -12,7 +12,7 @@ CONFIG_MODULE_UNLOAD=y
> # CONFIG_BLK_DEV_BSG is not set
> # CONFIG_EBONY is not set
> CONFIG_WARP=y
> -CONFIG_PPC4xx_GPIO=y
> +CONFIG_GPIO_PPC4XX=y
> CONFIG_HZ_1000=y
> CONFIG_CMDLINE="ip=on"
> # CONFIG_PCI is not set
> diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
> index 41c930f74ed4..57a7342232d7 100644
> --- a/arch/powerpc/configs/ppc44x_defconfig
> +++ b/arch/powerpc/configs/ppc44x_defconfig
> @@ -22,7 +22,7 @@ CONFIG_GLACIER=y
> CONFIG_REDWOOD=y
> CONFIG_EIGER=y
> CONFIG_YOSEMITE=y
> -CONFIG_PPC4xx_GPIO=y
> +CONFIG_GPIO_PPC4XX=y
> CONFIG_MATH_EMULATION=y
> CONFIG_NET=y
> CONFIG_PACKET=y
> diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
> index fc79f8466933..150813cea945 100644
> --- a/arch/powerpc/platforms/44x/Kconfig
> +++ b/arch/powerpc/platforms/44x/Kconfig
> @@ -227,13 +227,6 @@ config PPC44x_SIMPLE
> help
> This option enables the simple PowerPC 44x platform support.
>
> -config PPC4xx_GPIO
> - bool "PPC4xx GPIO support"
> - depends on 44x
> - select GPIOLIB
> - help
> - Enable gpiolib support for ppc440 based boards
> -
> # 44x specific CPU modules, selected based on the board above.
> config 440EP
> bool
> diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
> index ca7b1bb442d9..179468a00f5e 100644
> --- a/arch/powerpc/platforms/44x/Makefile
> +++ b/arch/powerpc/platforms/44x/Makefile
> @@ -15,4 +15,3 @@ obj-$(CONFIG_FSP2) += fsp2.o
> obj-$(CONFIG_PCI) += pci.o
> obj-$(CONFIG_PPC4xx_HSTA_MSI) += hsta_msi.o
> obj-$(CONFIG_PPC4xx_CPM) += cpm.o
> -obj-$(CONFIG_PPC4xx_GPIO) += gpio.o
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 020e51e30317..b87d2329900b 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -584,6 +584,13 @@ config GPIO_POLARFIRE_SOC
> help
> Say yes here to support the GPIO controllers on Microchip FPGAs.
>
> +config GPIO_PPC4XX
I'd prefer CONFIG_GPIO_PPC44X
That was added by 878e7556bfe7 ("powerpc/4xx: Add PowerPC 4xx GPIO
driver") but since then 40x is gone with commit 47d13a269bbd
("powerpc/40x: Remove 40x platforms.") so only 44x remains as depicted
by commit 7bf5f0562b62 ("powerpc: Replace CONFIG_4xx with CONFIG_44x")
> + tristate "PPC4xx GPIO support"
> + depends on 44x || (PPC && COMPILE_TEST)
> + select GPIO_GENERIC
> + help
> + Enable gpiolib support for ppc440 based boards.
> +
> config GPIO_PXA
> bool "PXA GPIO support"
> depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index b267598b517d..192242988ecb 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -145,6 +145,7 @@ obj-$(CONFIG_GPIO_PCIE_IDIO_24) += gpio-pcie-idio-24.o
> obj-$(CONFIG_GPIO_PCI_IDIO_16) += gpio-pci-idio-16.o
> obj-$(CONFIG_GPIO_PISOSR) += gpio-pisosr.o
> obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
> +obj-$(CONFIG_GPIO_PPC4XX) += gpio-ppc4xx.o
> obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o
> obj-$(CONFIG_GPIO_POLARFIRE_SOC) += gpio-mpfs.o
> obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
> diff --git a/arch/powerpc/platforms/44x/gpio.c b/drivers/gpio/gpio-ppc4xx.c
> similarity index 100%
> rename from arch/powerpc/platforms/44x/gpio.c
> rename to drivers/gpio/gpio-ppc4xx.c
On Thu, May 28, 2026 at 11:50 PM Christophe Leroy (CS GROUP)
<chleroy@kernel.org> wrote:
>
>
>
> Le 28/05/2026 à 04:56, Rosen Penev a écrit :
> > Move the ppc4xx gpio driver out of arch/powerpc/platforms/44x/ into
> > drivers/gpio/gpio-ppc4xx.c. The driver has no architecture-specific
> > dependencies and follows the same pattern as other PowerPC GPIO
> > drivers already in drivers/gpio/ (e.g. gpio-mpc8xxx, gpio-mpc5200).
> >
> > - Renamed Kconfig symbol from PPC4xx_GPIO to GPIO_PPC4XX
> > - Updated ppc44x_defconfig and warp_defconfig to use the new symbol
> > - Marked the new option as tristate (was bool) since the driver
> > supports module build via module_platform_driver()
> > - Added COMPILE_TEST support. Needs PPC as clrbits32 is in use.
>
> Not only clrbits32() but also setbits32() and in_be32().
Right. I noted it as an example.
>
> On the long run we want to get rid of PPC specific IO helpers, at least
> outside arch/powerpc/ , so don't add new instances.
>
> Remove that dependency by switching to ioread32be() which has been
> equivalent to in_be32() since commit 894fa235eb4c ("powerpc: inline
> iomap accessors"), then implement a local equivalent of
> clrbits32()/setbits32()
>
> See for instance:
> - qe_setbits_be32() in include/soc/fsl/qe/qe.h
> - tsa_clrbits32() in drivers/soc/fsl/qe/tsa.c
>
> >
> > Assisted-by: OpenCode:BigPickle
> > Signed-off-by: mangix <mangix@disroot.org>
>
> Who is that ?
My computer username. I've since edited AGENTS.md so it always adds --signoff.
>
> > ---
> > arch/powerpc/configs/44x/warp_defconfig | 2 +-
> > arch/powerpc/configs/ppc44x_defconfig | 2 +-
> > arch/powerpc/platforms/44x/Kconfig | 7 -------
> > arch/powerpc/platforms/44x/Makefile | 1 -
> > drivers/gpio/Kconfig | 7 +++++++
> > drivers/gpio/Makefile | 1 +
> > .../platforms/44x/gpio.c => drivers/gpio/gpio-ppc4xx.c | 0
>
> Not gpio-ppc4xx.c but gpio-ppc44x.c
ACK
>
> > 7 files changed, 10 insertions(+), 10 deletions(-)
> > rename arch/powerpc/platforms/44x/gpio.c => drivers/gpio/gpio-ppc4xx.c (100%)
> >
> > diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
> > index 5757625469c4..380fa15af68d 100644
> > --- a/arch/powerpc/configs/44x/warp_defconfig
> > +++ b/arch/powerpc/configs/44x/warp_defconfig
> > @@ -12,7 +12,7 @@ CONFIG_MODULE_UNLOAD=y
> > # CONFIG_BLK_DEV_BSG is not set
> > # CONFIG_EBONY is not set
> > CONFIG_WARP=y
> > -CONFIG_PPC4xx_GPIO=y
> > +CONFIG_GPIO_PPC4XX=y
> > CONFIG_HZ_1000=y
> > CONFIG_CMDLINE="ip=on"
> > # CONFIG_PCI is not set
> > diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
> > index 41c930f74ed4..57a7342232d7 100644
> > --- a/arch/powerpc/configs/ppc44x_defconfig
> > +++ b/arch/powerpc/configs/ppc44x_defconfig
> > @@ -22,7 +22,7 @@ CONFIG_GLACIER=y
> > CONFIG_REDWOOD=y
> > CONFIG_EIGER=y
> > CONFIG_YOSEMITE=y
> > -CONFIG_PPC4xx_GPIO=y
> > +CONFIG_GPIO_PPC4XX=y
> > CONFIG_MATH_EMULATION=y
> > CONFIG_NET=y
> > CONFIG_PACKET=y
> > diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
> > index fc79f8466933..150813cea945 100644
> > --- a/arch/powerpc/platforms/44x/Kconfig
> > +++ b/arch/powerpc/platforms/44x/Kconfig
> > @@ -227,13 +227,6 @@ config PPC44x_SIMPLE
> > help
> > This option enables the simple PowerPC 44x platform support.
> >
> > -config PPC4xx_GPIO
> > - bool "PPC4xx GPIO support"
> > - depends on 44x
> > - select GPIOLIB
> > - help
> > - Enable gpiolib support for ppc440 based boards
> > -
> > # 44x specific CPU modules, selected based on the board above.
> > config 440EP
> > bool
> > diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
> > index ca7b1bb442d9..179468a00f5e 100644
> > --- a/arch/powerpc/platforms/44x/Makefile
> > +++ b/arch/powerpc/platforms/44x/Makefile
> > @@ -15,4 +15,3 @@ obj-$(CONFIG_FSP2) += fsp2.o
> > obj-$(CONFIG_PCI) += pci.o
> > obj-$(CONFIG_PPC4xx_HSTA_MSI) += hsta_msi.o
> > obj-$(CONFIG_PPC4xx_CPM) += cpm.o
> > -obj-$(CONFIG_PPC4xx_GPIO) += gpio.o
> > diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> > index 020e51e30317..b87d2329900b 100644
> > --- a/drivers/gpio/Kconfig
> > +++ b/drivers/gpio/Kconfig
> > @@ -584,6 +584,13 @@ config GPIO_POLARFIRE_SOC
> > help
> > Say yes here to support the GPIO controllers on Microchip FPGAs.
> >
> > +config GPIO_PPC4XX
>
> I'd prefer CONFIG_GPIO_PPC44X
>
> That was added by 878e7556bfe7 ("powerpc/4xx: Add PowerPC 4xx GPIO
> driver") but since then 40x is gone with commit 47d13a269bbd
> ("powerpc/40x: Remove 40x platforms.") so only 44x remains as depicted
> by commit 7bf5f0562b62 ("powerpc: Replace CONFIG_4xx with CONFIG_44x")
Agreed.
>
> > + tristate "PPC4xx GPIO support"
> > + depends on 44x || (PPC && COMPILE_TEST)
> > + select GPIO_GENERIC
> > + help
> > + Enable gpiolib support for ppc440 based boards.
> > +
> > config GPIO_PXA
> > bool "PXA GPIO support"
> > depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
> > diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> > index b267598b517d..192242988ecb 100644
> > --- a/drivers/gpio/Makefile
> > +++ b/drivers/gpio/Makefile
> > @@ -145,6 +145,7 @@ obj-$(CONFIG_GPIO_PCIE_IDIO_24) += gpio-pcie-idio-24.o
> > obj-$(CONFIG_GPIO_PCI_IDIO_16) += gpio-pci-idio-16.o
> > obj-$(CONFIG_GPIO_PISOSR) += gpio-pisosr.o
> > obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
> > +obj-$(CONFIG_GPIO_PPC4XX) += gpio-ppc4xx.o
> > obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o
> > obj-$(CONFIG_GPIO_POLARFIRE_SOC) += gpio-mpfs.o
> > obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
> > diff --git a/arch/powerpc/platforms/44x/gpio.c b/drivers/gpio/gpio-ppc4xx.c
> > similarity index 100%
> > rename from arch/powerpc/platforms/44x/gpio.c
> > rename to drivers/gpio/gpio-ppc4xx.c
>
On Wed, May 27, 2026 at 7:56 PM Rosen Penev <rosenp@gmail.com> wrote: > > Move the ppc4xx gpio driver out of arch/powerpc/platforms/44x/ into > drivers/gpio/gpio-ppc4xx.c. The driver has no architecture-specific > dependencies and follows the same pattern as other PowerPC GPIO > drivers already in drivers/gpio/ (e.g. gpio-mpc8xxx, gpio-mpc5200). > > - Renamed Kconfig symbol from PPC4xx_GPIO to GPIO_PPC4XX > - Updated ppc44x_defconfig and warp_defconfig to use the new symbol > - Marked the new option as tristate (was bool) since the driver > supports module build via module_platform_driver() > - Added COMPILE_TEST support. Needs PPC as clrbits32 is in use. > > Assisted-by: OpenCode:BigPickle > Signed-off-by: mangix <mangix@disroot.org> Sigh forgot to check this. Was too focused on testing this. > --- > arch/powerpc/configs/44x/warp_defconfig | 2 +- > arch/powerpc/configs/ppc44x_defconfig | 2 +- > arch/powerpc/platforms/44x/Kconfig | 7 ------- > arch/powerpc/platforms/44x/Makefile | 1 - > drivers/gpio/Kconfig | 7 +++++++ > drivers/gpio/Makefile | 1 + > .../platforms/44x/gpio.c => drivers/gpio/gpio-ppc4xx.c | 0 > 7 files changed, 10 insertions(+), 10 deletions(-) > rename arch/powerpc/platforms/44x/gpio.c => drivers/gpio/gpio-ppc4xx.c (100%) > > diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig > index 5757625469c4..380fa15af68d 100644 > --- a/arch/powerpc/configs/44x/warp_defconfig > +++ b/arch/powerpc/configs/44x/warp_defconfig > @@ -12,7 +12,7 @@ CONFIG_MODULE_UNLOAD=y > # CONFIG_BLK_DEV_BSG is not set > # CONFIG_EBONY is not set > CONFIG_WARP=y > -CONFIG_PPC4xx_GPIO=y > +CONFIG_GPIO_PPC4XX=y > CONFIG_HZ_1000=y > CONFIG_CMDLINE="ip=on" > # CONFIG_PCI is not set > diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig > index 41c930f74ed4..57a7342232d7 100644 > --- a/arch/powerpc/configs/ppc44x_defconfig > +++ b/arch/powerpc/configs/ppc44x_defconfig > @@ -22,7 +22,7 @@ CONFIG_GLACIER=y > CONFIG_REDWOOD=y > CONFIG_EIGER=y > CONFIG_YOSEMITE=y > -CONFIG_PPC4xx_GPIO=y > +CONFIG_GPIO_PPC4XX=y > CONFIG_MATH_EMULATION=y > CONFIG_NET=y > CONFIG_PACKET=y > diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig > index fc79f8466933..150813cea945 100644 > --- a/arch/powerpc/platforms/44x/Kconfig > +++ b/arch/powerpc/platforms/44x/Kconfig > @@ -227,13 +227,6 @@ config PPC44x_SIMPLE > help > This option enables the simple PowerPC 44x platform support. > > -config PPC4xx_GPIO > - bool "PPC4xx GPIO support" > - depends on 44x > - select GPIOLIB > - help > - Enable gpiolib support for ppc440 based boards > - > # 44x specific CPU modules, selected based on the board above. > config 440EP > bool > diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile > index ca7b1bb442d9..179468a00f5e 100644 > --- a/arch/powerpc/platforms/44x/Makefile > +++ b/arch/powerpc/platforms/44x/Makefile > @@ -15,4 +15,3 @@ obj-$(CONFIG_FSP2) += fsp2.o > obj-$(CONFIG_PCI) += pci.o > obj-$(CONFIG_PPC4xx_HSTA_MSI) += hsta_msi.o > obj-$(CONFIG_PPC4xx_CPM) += cpm.o > -obj-$(CONFIG_PPC4xx_GPIO) += gpio.o > diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig > index 020e51e30317..b87d2329900b 100644 > --- a/drivers/gpio/Kconfig > +++ b/drivers/gpio/Kconfig > @@ -584,6 +584,13 @@ config GPIO_POLARFIRE_SOC > help > Say yes here to support the GPIO controllers on Microchip FPGAs. > > +config GPIO_PPC4XX > + tristate "PPC4xx GPIO support" > + depends on 44x || (PPC && COMPILE_TEST) > + select GPIO_GENERIC > + help > + Enable gpiolib support for ppc440 based boards. > + > config GPIO_PXA > bool "PXA GPIO support" > depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST > diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile > index b267598b517d..192242988ecb 100644 > --- a/drivers/gpio/Makefile > +++ b/drivers/gpio/Makefile > @@ -145,6 +145,7 @@ obj-$(CONFIG_GPIO_PCIE_IDIO_24) += gpio-pcie-idio-24.o > obj-$(CONFIG_GPIO_PCI_IDIO_16) += gpio-pci-idio-16.o > obj-$(CONFIG_GPIO_PISOSR) += gpio-pisosr.o > obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o > +obj-$(CONFIG_GPIO_PPC4XX) += gpio-ppc4xx.o > obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o > obj-$(CONFIG_GPIO_POLARFIRE_SOC) += gpio-mpfs.o > obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o > diff --git a/arch/powerpc/platforms/44x/gpio.c b/drivers/gpio/gpio-ppc4xx.c > similarity index 100% > rename from arch/powerpc/platforms/44x/gpio.c > rename to drivers/gpio/gpio-ppc4xx.c > -- > 2.54.0 >
© 2016 - 2026 Red Hat, Inc.