The &pmh0101_gpios node is extended twice in glymur-crd.dtsi. The first
extension defines the nvme_reg_en pinctrl state for the NVMe regulator
enable GPIO (gpio14), and the second adds key_vol_up_default for the
volume-up key (gpio6).

Merge both pinctrl states into a single &pmh0101_gpios block to avoid
the duplicate node extension.

No functional change intended.

Fixes: a5ad8a8e473c ("arm64: dts: qcom: Commonize Glymur CRD DTSI")
Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/glymur-crd.dtsi | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
index e784b538f42e..faa149b02c69 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
@@ -543,6 +543,13 @@ nvme_reg_en: nvme-reg-en-state {
 		function = "normal";
 		bias-disable;
 	};
+
+	key_vol_up_default: key-vol-up-default-state {
+		pins = "gpio6";
+		function = "normal";
+		output-disable;
+		bias-pull-up;
+	};
 };
 
 &pmh0110_f_e1_gpios {
@@ -553,15 +560,6 @@ nvme_sec_reg_en: nvme-reg-en-state {
 	};
 };
 
-&pmh0101_gpios {
-	key_vol_up_default: key-vol-up-default-state {
-		pins = "gpio6";
-		function = "normal";
-		output-disable;
-		bias-pull-up;
-	};
-};
-
 &pmk8850_rtc {
 	qcom,no-alarm;
 };

---
base-commit: d387b06f7c15b4639244ad66b4b0900c6a02b430
change-id: 20260526-merge-duplicate-pmh0101-gpios-node-52eaf99f8485

Best regards,
-- 
Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>