The driver falls back to PIO mode if DMA setup fails during probe.

Make sure to the clear the DMA channel pointers on setup failure to
avoid dereferencing an error pointer on later probe errors or driver
unbind.

This issue was flagged by Sashiko when reviewing a devres allocation
conversion patch.

Fixes: e79e7c2df627 ("spi: ep93xx: add DT support for Cirrus EP93xx")
Link: https://sashiko.dev/#/patchset/20260429091333.165363-1-johan%40kernel.org?part=10
Cc: stable@vger.kernel.org	# 6.12
Cc: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/spi/spi-ep93xx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index db50018050e5..f716c9607be4 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -582,12 +582,14 @@ static int ep93xx_spi_setup_dma(struct device *dev, struct ep93xx_spi *espi)
 	espi->dma_rx = dma_request_chan(dev, "rx");
 	if (IS_ERR(espi->dma_rx)) {
 		ret = dev_err_probe(dev, PTR_ERR(espi->dma_rx), "rx DMA setup failed");
+		espi->dma_rx = NULL;
 		goto fail_free_page;
 	}
 
 	espi->dma_tx = dma_request_chan(dev, "tx");
 	if (IS_ERR(espi->dma_tx)) {
 		ret = dev_err_probe(dev, PTR_ERR(espi->dma_tx), "tx DMA setup failed");
+		espi->dma_tx = NULL;
 		goto fail_release_rx;
 	}
 
-- 
2.53.0

On Tue, 12 May 2026 09:48:49 +0200, Johan Hovold wrote:
> spi: ep93xx: fix error pointer deref after DMA setup failure

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-7.1

Thanks!

[1/1] spi: ep93xx: fix error pointer deref after DMA setup failure
      https://git.kernel.org/broonie/spi/c/5e121a81667a

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

On Tue, 2026-05-12 at 09:48 +0200, Johan Hovold wrote:
> The driver falls back to PIO mode if DMA setup fails during probe.
> 
> Make sure to the clear the DMA channel pointers on setup failure to
> avoid dereferencing an error pointer on later probe errors or driver
> unbind.
> 
> This issue was flagged by Sashiko when reviewing a devres allocation
> conversion patch.
> 
> Fixes: e79e7c2df627 ("spi: ep93xx: add DT support for Cirrus EP93xx")
> Link:
> https://sashiko.dev/#/patchset/20260429091333.165363-1-johan%40kernel.org?part=10
> Cc: stable@vger.kernel.org	# 6.12
> Cc: Nikita Shubin <nikita.shubin@maquefel.me>
> Signed-off-by: Johan Hovold <johan@kernel.org>

Acked-by: Nikita Shubin <nikita.shubin@maquefel.me>

> ---
>  drivers/spi/spi-ep93xx.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
> index db50018050e5..f716c9607be4 100644
> --- a/drivers/spi/spi-ep93xx.c
> +++ b/drivers/spi/spi-ep93xx.c
> @@ -582,12 +582,14 @@ static int ep93xx_spi_setup_dma(struct device
> *dev, struct ep93xx_spi *espi)
>  	espi->dma_rx = dma_request_chan(dev, "rx");
>  	if (IS_ERR(espi->dma_rx)) {
>  		ret = dev_err_probe(dev, PTR_ERR(espi->dma_rx), "rx
> DMA setup failed");
> +		espi->dma_rx = NULL;
>  		goto fail_free_page;
>  	}
>  
>  	espi->dma_tx = dma_request_chan(dev, "tx");
>  	if (IS_ERR(espi->dma_tx)) {
>  		ret = dev_err_probe(dev, PTR_ERR(espi->dma_tx), "tx
> DMA setup failed");
> +		espi->dma_tx = NULL;
>  		goto fail_release_rx;
>  	}
>