.../bindings/media/qcom,sm8250-venus.yaml | 12 ++- .../dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 6 ++ arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 103 ++++++++++++++++++++- arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 6 ++ arch/arm64/boot/dts/qcom/sm8350.dtsi | 81 ++++++++++++++++ 5 files changed, 203 insertions(+), 5 deletions(-)
In order to enable wider testing of the Iris driver on the HFI Gen1
platforms enable support for Qualcomm SM8350 and SC8280XP platforms.
Note, this has been tested only with the Iris driver. Venus driver fails
to boot the Iris core on SM8350 pointing out the UC_REGION error.
Note, the firmware for SM8250 isn't compatible with SM8350 (nor with
SC8280XP). Please use corresponding firmware, extracted from the Windows
/ Android data.
On SM8350 with the Iris driver:
$ v4l2-compliance
v4l2-compliance 1.30.1, 64 bits, 64-bit time_t
Compliance test for iris_driver device /dev/video0:
Driver Info:
Driver name : iris_driver
Card type : Iris Decoder
Bus info : platform:aa00000.video-codec
Driver version : 7.0.0
Capabilities : 0x84204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Detected Stateful Decoder
Required ioctls:
test VIDIOC_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 2 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK
test Composing: OK
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test CREATE_BUFS maximum buffers: OK
test VIDIOC_REMOVE_BUFS: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
test blocking wait: OK
Total for iris_driver device /dev/video0: 48, Succeeded: 48, Failed: 0, Warnings: 0
|TOTALS|FFmpeg-H.265-v4l2m2m|GStreamer-H.265-V4L2-Gst1.0|FFmpeg-H.264-v4l2m2m|GStreamer-H.264-V4L2-Gst1.0|FFmpeg-VP9-v4l2m2m|GStreamer-VP9-V4L2-Gst1.0|
|-|-|-|-|-|-|-|
|TOTAL|169/316|128/316|154/447|126/447|159/311|229/311|
|TOTAL TIME|242.251s|267.903s|293.458s|261.934s|203.009s|366.936s|
|-|-|-|-|-|-|-|
|Profile|FFmpeg-H.265-v4l2m2m|GStreamer-H.265-V4L2-Gst1.0|FFmpeg-H.264-v4l2m2m|GStreamer-H.264-V4L2-Gst1.0|FFmpeg-VP9-v4l2m2m|GStreamer-VP9-V4L2-Gst1.0|
|BASELINE|0/0|0/0|3/7|4/7|0/0|0/0|
|CAVLC_4_4_4|0/0|0/0|0/3|0/3|0/0|0/0|
|CAVLC_4_4_4_INTRA|0/0|0/0|0/4|0/4|0/0|0/0|
|CONSTRAINED_BASELINE|0/0|0/0|32/33|33/33|0/0|0/0|
|EXTENDED|0/0|0/0|1/6|1/6|0/0|0/0|
|HIGH|0/0|0/0|22/45|22/45|0/0|0/0|
|HIGH_10|0/0|0/0|0/2|0/2|0/0|0/0|
|HIGH_10_INTRA|0/0|0/0|0/7|0/7|0/0|0/0|
|HIGH_4_2_2|0/0|0/0|0/21|0/21|0/0|0/0|
|HIGH_4_2_2_INTRA|0/0|0/0|0/7|0/7|0/0|0/0|
|HIGH_4_4_4_INTRA|0/0|0/0|0/6|0/6|0/0|0/0|
|HIGH_4_4_4_PREDICTIVE|0/0|0/0|0/11|0/11|0/0|0/0|
|MAIN|127/135|126/135|41/90|41/90|0/0|0/0|
|MAIN_10|0/11|0/11|0/0|0/0|0/0|0/0|
|MAIN_STILL_PICTURE|1/1|1/1|0/0|0/0|0/0|0/0|
|-|-|-|-|-|-|-|
Tests failing on SM8350, but passing on SM8250 (note, on SM8350 they
also work with FFmpeg, but fail with Gstreamer).
- AMP_E_Hisilicon_3
- AMP_F_Hisilicon_3
- DELTAQP_A_BRCM_4
- SAODBLK_A_MainConcept_4
- TILES_A_Cisco_2
- VPSSPSPPS_A_MainConcept_1 (this one timeouts with ffmpeg on both
SM8250 and SM8350 and fails with Gstreamer on SM8350)
- vp90-2-14-resize-10frames-fp-tiles-8-4-2-1.webm
- vp90-2-14-resize-fp-tiles-8-16.webm
- vp90-2-22-svc_1280x720_1.webm (works with ffmpeg, fails with
Gstreamer)
For SC8280XP:
|TOTALS|FFmpeg-VP9-v4l2m2m|GStreamer-VP9-V4L2|FFmpeg-H.264-v4l2m2m|GStreamer-H.264-V4L2|FFmpeg-H.265-v4l2m2m|GStreamer-H.265-V4L2|
|-|-|-|-|-|-|-|
|TOTAL|158/311|232/311|93/447|126/447|166/316|133/316|
|TOTAL TIME|85.753s|111.439s|359.253s|65.825s|79.435s|88.543s|
|-|-|-|-|-|-|-|
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
Changes in v5:
- Rebaed on the pending next tree.
- Corrected Iris block name (Krzysztof)
- Link to v4: https://lore.kernel.org/r/20260312-iris-sc8280xp-v4-0-a047ef1e3c7d@oss.qualcomm.com
Changes in v4:
- Changed compat strings to use -iris instead of -venus (Konrad,
Dikshita)
- Dropped separate schema file, switched to SM8250 schema
- Dropped driver bits, it's covered by compatible string now
- Link to v3: https://lore.kernel.org/r/20260125-iris-sc8280xp-v3-0-d21861a9ea33@oss.qualcomm.com
Changes in v3:
- Add missing header, sorry.
- Link to v2: https://lore.kernel.org/r/20260125-iris-sc8280xp-v2-0-552cdc3ea691@oss.qualcomm.com
Changes in v2:
- Added missing chunk, including sm8350-videocc.h, lost in rebases.
- Link to v1: https://lore.kernel.org/r/20260125-iris-sc8280xp-v1-0-2c5e69fae76b@oss.qualcomm.com
---
Dmitry Baryshkov (4):
media: dt-bindings: Document SC8280XP/SM8350 Iris
arm64: dts: qcom: sc8280xp: sort reserved memory regions
arm64: dts: qcom: sm8350: add Iris device
arm64: dts: qcom: sm8350-hdk: enable Iris core
Konrad Dybcio (2):
arm64: dts: qcom: sc8280xp: Add Iris core
arm64: dts: qcom: sc8280xp-x13s: Enable Iris
.../bindings/media/qcom,sm8250-venus.yaml | 12 ++-
.../dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 6 ++
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 103 ++++++++++++++++++++-
arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 6 ++
arch/arm64/boot/dts/qcom/sm8350.dtsi | 81 ++++++++++++++++
5 files changed, 203 insertions(+), 5 deletions(-)
---
base-commit: 10f943b12e7cb338da00f10e129043ae27b33af4
change-id: 20260120-iris-sc8280xp-85d13bc60536
Best regards,
--
With best wishes
Dmitry
On 5/12/2026 6:39 PM, Dmitry Baryshkov wrote: > In order to enable wider testing of the Iris driver on the HFI Gen1 > platforms enable support for Qualcomm SM8350 and SC8280XP platforms. > > Note, this has been tested only with the Iris driver. Venus driver fails > to boot the Iris core on SM8350 pointing out the UC_REGION error. > > Note, the firmware for SM8250 isn't compatible with SM8350 (nor with > SC8280XP). Please use corresponding firmware, extracted from the Windows > / Android data. You can push the tested firmware to linux-firmware > > On SM8350 with the Iris driver: > > $ v4l2-compliance > v4l2-compliance 1.30.1, 64 bits, 64-bit time_t > > Compliance test for iris_driver device /dev/video0: > > Driver Info: > Driver name : iris_driver > Card type : Iris Decoder > Bus info : platform:aa00000.video-codec > Driver version : 7.0.0 > Capabilities : 0x84204000 > Video Memory-to-Memory Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04204000 > Video Memory-to-Memory Multiplanar > Streaming > Extended Pix Format > Detected Stateful Decoder > > Required ioctls: > test VIDIOC_QUERYCAP: OK > test invalid ioctls: OK > > Allow for multiple opens: > test second /dev/video0 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 2 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK > test Composing: OK > test Scaling: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test CREATE_BUFS maximum buffers: OK > test VIDIOC_REMOVE_BUFS: OK > test VIDIOC_EXPBUF: OK > test Requests: OK (Not Supported) > test blocking wait: OK > > Total for iris_driver device /dev/video0: 48, Succeeded: 48, Failed: 0, Warnings: 0 > > |TOTALS|FFmpeg-H.265-v4l2m2m|GStreamer-H.265-V4L2-Gst1.0|FFmpeg-H.264-v4l2m2m|GStreamer-H.264-V4L2-Gst1.0|FFmpeg-VP9-v4l2m2m|GStreamer-VP9-V4L2-Gst1.0| > |-|-|-|-|-|-|-| > |TOTAL|169/316|128/316|154/447|126/447|159/311|229/311| > |TOTAL TIME|242.251s|267.903s|293.458s|261.934s|203.009s|366.936s| > |-|-|-|-|-|-|-| > |Profile|FFmpeg-H.265-v4l2m2m|GStreamer-H.265-V4L2-Gst1.0|FFmpeg-H.264-v4l2m2m|GStreamer-H.264-V4L2-Gst1.0|FFmpeg-VP9-v4l2m2m|GStreamer-VP9-V4L2-Gst1.0| > |BASELINE|0/0|0/0|3/7|4/7|0/0|0/0| > |CAVLC_4_4_4|0/0|0/0|0/3|0/3|0/0|0/0| > |CAVLC_4_4_4_INTRA|0/0|0/0|0/4|0/4|0/0|0/0| > |CONSTRAINED_BASELINE|0/0|0/0|32/33|33/33|0/0|0/0| > |EXTENDED|0/0|0/0|1/6|1/6|0/0|0/0| > |HIGH|0/0|0/0|22/45|22/45|0/0|0/0| > |HIGH_10|0/0|0/0|0/2|0/2|0/0|0/0| > |HIGH_10_INTRA|0/0|0/0|0/7|0/7|0/0|0/0| > |HIGH_4_2_2|0/0|0/0|0/21|0/21|0/0|0/0| > |HIGH_4_2_2_INTRA|0/0|0/0|0/7|0/7|0/0|0/0| > |HIGH_4_4_4_INTRA|0/0|0/0|0/6|0/6|0/0|0/0| > |HIGH_4_4_4_PREDICTIVE|0/0|0/0|0/11|0/11|0/0|0/0| > |MAIN|127/135|126/135|41/90|41/90|0/0|0/0| > |MAIN_10|0/11|0/11|0/0|0/0|0/0|0/0| > |MAIN_STILL_PICTURE|1/1|1/1|0/0|0/0|0/0|0/0| > |-|-|-|-|-|-|-| Can we do this in the format which we have been following for other SOC ? How to make out which is failing and passing test here ? Regards, Vikash
On Tue, 12 May 2026 at 19:40, Vikash Garodia <vikash.garodia@oss.qualcomm.com> wrote: > > > On 5/12/2026 6:39 PM, Dmitry Baryshkov wrote: > > In order to enable wider testing of the Iris driver on the HFI Gen1 > > platforms enable support for Qualcomm SM8350 and SC8280XP platforms. > > > > Note, this has been tested only with the Iris driver. Venus driver fails > > to boot the Iris core on SM8350 pointing out the UC_REGION error. > > > > Note, the firmware for SM8250 isn't compatible with SM8350 (nor with > > SC8280XP). Please use corresponding firmware, extracted from the Windows > > / Android data. > > You can push the tested firmware to linux-firmware I'd prefer if firmware for devices came from your team. Firmware for SM8350 which I have here identifies itself as video-firmware.1.0-6804c210603073037fb32640a3dd6a46fe04edd6 Firmware for SC8280XP (Lenovo X13s): video-firmware.1.1-b158087140355883dc40b004032856a8feb5d565 > > > > > On SM8350 with the Iris driver: > > > > $ v4l2-compliance > > v4l2-compliance 1.30.1, 64 bits, 64-bit time_t > > > > Compliance test for iris_driver device /dev/video0: > > > > Driver Info: > > Driver name : iris_driver > > Card type : Iris Decoder > > Bus info : platform:aa00000.video-codec > > Driver version : 7.0.0 > > Capabilities : 0x84204000 > > Video Memory-to-Memory Multiplanar > > Streaming > > Extended Pix Format > > Device Capabilities > > Device Caps : 0x04204000 > > Video Memory-to-Memory Multiplanar > > Streaming > > Extended Pix Format > > Detected Stateful Decoder > > > > Required ioctls: > > test VIDIOC_QUERYCAP: OK > > test invalid ioctls: OK > > > > Allow for multiple opens: > > test second /dev/video0 open: OK > > test VIDIOC_QUERYCAP: OK > > test VIDIOC_G/S_PRIORITY: OK > > test for unlimited opens: OK > > > > Debug ioctls: > > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > > test VIDIOC_LOG_STATUS: OK (Not Supported) > > > > Input ioctls: > > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > > test VIDIOC_ENUMAUDIO: OK (Not Supported) > > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > > test VIDIOC_G/S_AUDIO: OK (Not Supported) > > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > > > Output ioctls: > > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > > > Input/Output configuration ioctls: > > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > > test VIDIOC_G/S_EDID: OK (Not Supported) > > > > Control ioctls: > > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > > test VIDIOC_QUERYCTRL: OK > > test VIDIOC_G/S_CTRL: OK > > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > > Standard Controls: 2 Private Controls: 0 > > > > Format ioctls: > > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > > test VIDIOC_G/S_PARM: OK (Not Supported) > > test VIDIOC_G_FBUF: OK (Not Supported) > > test VIDIOC_G_FMT: OK > > test VIDIOC_TRY_FMT: OK > > test VIDIOC_S_FMT: OK > > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > > test Cropping: OK > > test Composing: OK > > test Scaling: OK (Not Supported) > > > > Codec ioctls: > > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > > test VIDIOC_(TRY_)DECODER_CMD: OK > > > > Buffer ioctls: > > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > > test CREATE_BUFS maximum buffers: OK > > test VIDIOC_REMOVE_BUFS: OK > > test VIDIOC_EXPBUF: OK > > test Requests: OK (Not Supported) > > test blocking wait: OK > > > > Total for iris_driver device /dev/video0: 48, Succeeded: 48, Failed: 0, Warnings: 0 > > > > |TOTALS|FFmpeg-H.265-v4l2m2m|GStreamer-H.265-V4L2-Gst1.0|FFmpeg-H.264-v4l2m2m|GStreamer-H.264-V4L2-Gst1.0|FFmpeg-VP9-v4l2m2m|GStreamer-VP9-V4L2-Gst1.0| > > |-|-|-|-|-|-|-| > > |TOTAL|169/316|128/316|154/447|126/447|159/311|229/311| > > |TOTAL TIME|242.251s|267.903s|293.458s|261.934s|203.009s|366.936s| > > |-|-|-|-|-|-|-| > > |Profile|FFmpeg-H.265-v4l2m2m|GStreamer-H.265-V4L2-Gst1.0|FFmpeg-H.264-v4l2m2m|GStreamer-H.264-V4L2-Gst1.0|FFmpeg-VP9-v4l2m2m|GStreamer-VP9-V4L2-Gst1.0| > > |BASELINE|0/0|0/0|3/7|4/7|0/0|0/0| > > |CAVLC_4_4_4|0/0|0/0|0/3|0/3|0/0|0/0| > > |CAVLC_4_4_4_INTRA|0/0|0/0|0/4|0/4|0/0|0/0| > > |CONSTRAINED_BASELINE|0/0|0/0|32/33|33/33|0/0|0/0| > > |EXTENDED|0/0|0/0|1/6|1/6|0/0|0/0| > > |HIGH|0/0|0/0|22/45|22/45|0/0|0/0| > > |HIGH_10|0/0|0/0|0/2|0/2|0/0|0/0| > > |HIGH_10_INTRA|0/0|0/0|0/7|0/7|0/0|0/0| > > |HIGH_4_2_2|0/0|0/0|0/21|0/21|0/0|0/0| > > |HIGH_4_2_2_INTRA|0/0|0/0|0/7|0/7|0/0|0/0| > > |HIGH_4_4_4_INTRA|0/0|0/0|0/6|0/6|0/0|0/0| > > |HIGH_4_4_4_PREDICTIVE|0/0|0/0|0/11|0/11|0/0|0/0| > > |MAIN|127/135|126/135|41/90|41/90|0/0|0/0| > > |MAIN_10|0/11|0/11|0/0|0/0|0/0|0/0| > > |MAIN_STILL_PICTURE|1/1|1/1|0/0|0/0|0/0|0/0| > > |-|-|-|-|-|-|-| > > Can we do this in the format which we have been following for other SOC > ? How to make out which is failing and passing test here ? Sure. I will fix this for the next iteration (tomorrow). > > Regards, > Vikash -- With best wishes Dmitry
© 2016 - 2026 Red Hat, Inc.