This series adds the ADSP and USB related description for the Qualcomm
Eliza platform.

The SoC dtsi gains the ADSP remoteproc node and its communication
dependencies, including IPCC, SMP2P and the AOSS QMP channel. It also
describes the USB controller, the SNPS eUSB2 PHY and the USB3/DP QMP
combo PHY.

The board dts then enables the ADSP and USB stack on the Eliza MTP,
including the Type-C connector graph, PMIC GLINK integration and the
PM7550BA eUSB2 repeater.

The following patchsets document all necessary bindings:

https://lore.kernel.org/all/20260504-eliza-bindings-phy-eusb2-v2-1-fa3a1fd65ab1@oss.qualcomm.com/
https://lore.kernel.org/all/20260504-eliza-bindings-qmp-phy-v2-1-849c4de8d75f@oss.qualcomm.com/
https://lore.kernel.org/all/20260504-eliza-bindings-aoss-v2-1-c3628ca79a25@oss.qualcomm.com/
https://lore.kernel.org/all/20260504-eliza-bindings-pmic-glink-v2-1-d6b5397b7899@oss.qualcomm.com/

Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
---
Changes in v2:
- Rebased on next-20260430.
- Changed the HS PHY ref clock to TCSR_USB2_CLKREF_EN, as suggested by
  Konrad.
- Changed the HS PHY VDD supply to L7K instead of L2B.
- Dropped the dr_mode property from the controller for MTP board, as
  suggested by Konrad.
- Re-worded the cover with more info and updated the bindings required
  patchsets list.
- Link to v1: https://patch.msgid.link/20260331-eliza-adsp-usb-v1-0-d8a251be20c3@oss.qualcomm.com

---
Abel Vesa (3):
      arm64: dts: qcom: eliza: Describe the ADSP and USB related nodes
      arm64: dts: qcom: Add Eliza-specific PM7750BA dtsi
      arm64: dts: qcom: eliza-mtp: Enable USB and ADSP support

 arch/arm64/boot/dts/qcom/eliza-mtp.dts       |  81 +++++++++
 arch/arm64/boot/dts/qcom/eliza.dtsi          | 261 +++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/pm7550ba-eliza.dtsi |  69 +++++++
 3 files changed, 411 insertions(+)
---
base-commit: b9303e6bff706758c167af686b5315ad00233bf8
change-id: 20260330-eliza-adsp-usb-8ef2b1b0fc13

Best regards,
--  
Abel Vesa <abel.vesa@oss.qualcomm.com>