of_find_compatible_node() returns a device node with its refcount
incremented. altr_portb_setup() looks up the SDMMC ECC node but does
not drop that reference on error paths or after successful setup.

Route those exits through an of_node_put() cleanup path. Also free the
EDAC control info if devres_open_group() fails after dci has been
allocated, and release the devres group before freeing dci because
altdev is stored in dci->pvt_info.

Fixes: 911049845d70 ("EDAC, altera: Add Arria10 SD-MMC EDAC support")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
---
Changes since v1:
- Free the EDAC control info when devres_open_group() fails after dci
  has been allocated.
- Release the PortB devres group before freeing dci so altdev->ddev
  remains valid during devres cleanup.
- Keep the !dci failure path limited to dropping the OF node reference.

 drivers/edac/altera_edac.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 4edd2088c2db..1b050e35ec4b 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -1526,15 +1526,18 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 		edac_printk(KERN_ERR, EDAC_DEVICE,
 			    "%s: Unable to allocate PortB EDAC device\n",
 			    ecc_name);
-		return -ENOMEM;
+		rc = -ENOMEM;
+		goto out_put_node;
 	}
 
 	/* Initialize the PortB EDAC device structure from PortA structure */
 	altdev = dci->pvt_info;
 	*altdev = *device;
 
-	if (!devres_open_group(&altdev->ddev, altr_portb_setup, GFP_KERNEL))
-		return -ENOMEM;
+	if (!devres_open_group(&altdev->ddev, altr_portb_setup, GFP_KERNEL)) {
+		rc = -ENOMEM;
+		goto err_free_ctl;
+	}
 
 	/* Update PortB specific values */
 	altdev->edac_dev_name = ecc_name;
@@ -1607,13 +1610,17 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 
 	devres_remove_group(&altdev->ddev, altr_portb_setup);
 
-	return 0;
+	rc = 0;
+	goto out_put_node;
 
 err_release_group_1:
-	edac_device_free_ctl_info(dci);
 	devres_release_group(&altdev->ddev, altr_portb_setup);
+err_free_ctl:
+	edac_device_free_ctl_info(dci);
 	edac_printk(KERN_ERR, EDAC_DEVICE,
 		    "%s:Error setting up EDAC device: %d\n", ecc_name, rc);
+out_put_node:
+	of_node_put(np);
 	return rc;
 }
 
-- 
2.43.0

On Sun, May 03, 2026 at 05:25:58PM -0400, Yuho Choi wrote:
> of_find_compatible_node() returns a device node with its refcount
> incremented. altr_portb_setup() looks up the SDMMC ECC node but does
> not drop that reference on error paths or after successful setup.
> 
> Route those exits through an of_node_put() cleanup path. Also free the
> EDAC control info if devres_open_group() fails after dci has been
> allocated, and release the devres group before freeing dci because
> altdev is stored in dci->pvt_info.
> 
> Fixes: 911049845d70 ("EDAC, altera: Add Arria10 SD-MMC EDAC support")
> Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
> ---
> Changes since v1:
> - Free the EDAC control info when devres_open_group() fails after dci
>   has been allocated.
> - Release the PortB devres group before freeing dci so altdev->ddev
>   remains valid during devres cleanup.
> - Keep the !dci failure path limited to dropping the OF node reference.

https://sashiko.dev/#/patchset/20260503212558.2811480-1-dbgh9129%40gmail.com

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette

> From: Yuho Choi <dbgh9129@gmail.com>
> Sent: Monday, May 4, 2026 5:26 AM
> To: Dinh Nguyen <dinguyen@kernel.org>; Borislav Petkov <bp@alien8.de>;
> Luck, Tony <tony.luck@intel.com>
> Cc: linux-edac@vger.kernel.org; linux-kernel@vger.kernel.org; Yuho Choi
> <dbgh9129@gmail.com>
> Subject: [PATCH v2] EDAC/altera: Fix SDMMC PortB OF node reference leak
> 
> of_find_compatible_node() returns a device node with its refcount
> incremented. altr_portb_setup() looks up the SDMMC ECC node but does not
> drop that reference on error paths or after successful setup.
> 
> Route those exits through an of_node_put() cleanup path. Also free the EDAC
> control info if devres_open_group() fails after dci has been allocated, and
> release the devres group before freeing dci because altdev is stored in dci-
> >pvt_info.
> 
> Fixes: 911049845d70 ("EDAC, altera: Add Arria10 SD-MMC EDAC support")
> Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
> ---
> Changes since v1:
> - Free the EDAC control info when devres_open_group() fails after dci
>   has been allocated.
> - Release the PortB devres group before freeing dci so altdev->ddev
>   remains valid during devres cleanup.
> - Keep the !dci failure path limited to dropping the OF node reference.
> 
>  drivers/edac/altera_edac.c | 17 ++++++++++++-----
>  1 file changed, 12 insertions(+), 5 deletions(-)


LGTM. Thanks.

   Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>

On 5/3/26 16:25, Yuho Choi wrote:
> of_find_compatible_node() returns a device node with its refcount
> incremented. altr_portb_setup() looks up the SDMMC ECC node but does
> not drop that reference on error paths or after successful setup.
> 
> Route those exits through an of_node_put() cleanup path. Also free the
> EDAC control info if devres_open_group() fails after dci has been
> allocated, and release the devres group before freeing dci because
> altdev is stored in dci->pvt_info.
> 
> Fixes: 911049845d70 ("EDAC, altera: Add Arria10 SD-MMC EDAC support")
> Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
> ---

I think you need the

Cc: stable@vger.kernel.org

But other than that:

Acked-by: Dinh Nguyen <dinguyen@kernel.org>

Thanks,
Dinh