Introduce support for the HONOR MagicBook Art 14 laptop.
This version is based on the initial work by Kirill A. Korinsky [1]
and Valentin Manea [2].

I'm using it with an external display connected to the HDMI port as
a daily driver for quite some time now.

Supported:

- Sound (with alsa-ucm-conf config [5])
  - Speakers
  - Headphone jack
- Bluetooth
- Battery
- HDMI
- Touchpad
- Keyboard (with backlight)
- Touchscreen
- WiFi
- USB-C ports
- USB-A port
- UFS
- H/W accel

Untested:

- Camera
- Fingerprint reader
- Sleep/Suspend

Broken:

- eDP
- DP over USB-C

ACPI dumps are available in aarch64-laptops repo [3].
HWids in dtbloader repo [4].

[1]: https://lore.kernel.org/all/871px910m1.wl-kirill@korins.ky/
[2]: https://github.com/vamanea/linux-magicbook/blob/x1e80100-magicbook-6.19/arch/arm64/boot/dts/qcom/x1e80100-honor-magicbook-art-14.dts
[3]: https://github.com/aarch64-laptops/build/tree/master/misc/honor-magicbook-art-14/acpi
[4]: https://github.com/TravMurav/dtbloader/blob/main/src/devices/honor_magicbook_art_14.c
[5]: https://github.com/alsa-project/alsa-ucm-conf/pull/755

Konstantin Shabanov (4):
  dt-bindings: vendor-prefixes: Add HONOR
  dt-bindings: arm: qcom: Add HONOR MagicBook Art 14
  arm64: dts: qcom: Add HONOR MagicBook Art 14 device tree
  firmware: qcom: scm: Allow QSEECOM on Honor Magicbook Art 14

 .../devicetree/bindings/arm/qcom.yaml         |    1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |    2 +
 arch/arm64/boot/dts/qcom/Makefile             |    2 +
 .../qcom/x1e80100-honor-magicbook-art-14.dts  | 1542 +++++++++++++++++
 drivers/firmware/qcom/qcom_scm.c              |    1 +
 5 files changed, 1548 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-honor-magicbook-art-14.dts


base-commit: e75a43c7cec459a07d91ed17de4de13ede2b7758
--
2.53.0