The original dev_info call was intentionally temporary, with a FIXME
comment noting it should be downgraded to dev_dbg once modules with
valid VID/PID values were common. Project Ara was cancelled in 2016,
so that time has long passed.

Remove the FIXME comment and downgrade to dev_dbg as originally intended.

Tested via code inspection only, as Project Ara hardware is no longer
available.

Signed-off-by: Bentley Blacketer  <sonionwhat@gmail.com>
---
Changes in v4:
 - Fixed duplicate Signed-off-by
 - Fixed missing tab on snprintf line
Changes in v3:
 - Fixed author name mismatch
Changes in v2:
 - Fixed whitespace issues
 - Moved testing note below --- line

 drivers/staging/greybus/bootrom.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/staging/greybus/bootrom.c b/drivers/staging/greybus/bootrom.c
index 83921d90c..9e0f24d6d 100644
--- a/drivers/staging/greybus/bootrom.c
+++ b/drivers/staging/greybus/bootrom.c
@@ -168,13 +168,8 @@ static int find_firmware(struct gb_bootrom *bootrom, u8 stage)
 		 intf->ddbl1_manufacturer_id, intf->ddbl1_product_id,
 		 intf->vendor_id, intf->product_id);
 
-	// FIXME:
-	// Turn to dev_dbg later after everyone has valid bootloaders with good
-	// ids, but leave this as dev_info for now to make it easier to track
-	// down "empty" vid/pid modules.
-	dev_info(&connection->bundle->dev, "Firmware file '%s' requested\n",
+	dev_dbg(&connection->bundle->dev, "Firmware file '%s' requested\n",
 		 firmware_name);
-
 	rc = request_firmware(&bootrom->fw, firmware_name,
 			      &connection->bundle->dev);
 	if (rc) {
-- 
2.54.0

On Thu, Apr 30, 2026 at 01:54:36PM -0400, Bentley Blacketer wrote:
> The original dev_info call was intentionally temporary, with a FIXME
> comment noting it should be downgraded to dev_dbg once modules with
> valid VID/PID values were common. Project Ara was cancelled in 2016,
> so that time has long passed.

But other systems are now using greybus, and there was at least 2
different phone models that shipped with this code.  So are you sure
that there is no user for this anymore?

> 
> Remove the FIXME comment and downgrade to dev_dbg as originally intended.
> 
> Tested via code inspection only, as Project Ara hardware is no longer
> available.

You can run greybus on a beaglebone device today.

> Signed-off-by: Bentley Blacketer  <sonionwhat@gmail.com>

You have an extra ' ' in there still.

> ---
> Changes in v4:
>  - Fixed duplicate Signed-off-by
>  - Fixed missing tab on snprintf line
> Changes in v3:
>  - Fixed author name mismatch
> Changes in v2:
>  - Fixed whitespace issues
>  - Moved testing note below --- line
> 
>  drivers/staging/greybus/bootrom.c | 7 +------
>  1 file changed, 1 insertion(+), 6 deletions(-)
> 
> diff --git a/drivers/staging/greybus/bootrom.c b/drivers/staging/greybus/bootrom.c
> index 83921d90c..9e0f24d6d 100644
> --- a/drivers/staging/greybus/bootrom.c
> +++ b/drivers/staging/greybus/bootrom.c
> @@ -168,13 +168,8 @@ static int find_firmware(struct gb_bootrom *bootrom, u8 stage)
>  		 intf->ddbl1_manufacturer_id, intf->ddbl1_product_id,
>  		 intf->vendor_id, intf->product_id);
>  
> -	// FIXME:
> -	// Turn to dev_dbg later after everyone has valid bootloaders with good
> -	// ids, but leave this as dev_info for now to make it easier to track
> -	// down "empty" vid/pid modules.
> -	dev_info(&connection->bundle->dev, "Firmware file '%s' requested\n",
> +	dev_dbg(&connection->bundle->dev, "Firmware file '%s' requested\n",
>  		 firmware_name);
> -

Why did you drop the blank line too?

thanks,

greg k-h