Dependencies
============
1. Depends on USB patches, which are being reviewed, therefore marking it
as RFC as it cannot be applied.
https://lore.kernel.org/all/20260331-eliza-adsp-usb-v1-0-d8a251be20c3@oss.qualcomm.com/

2. Bindings were mostly merged, except change to SM8650 DP bindings
   here:
https://lore.kernel.org/all/20260405-dts-qcom-display-regs-v2-0-34f4024c65dc@oss.qualcomm.com/

Changes in v2:
==============
- New Patch #3: enable display port
- Add tags
- Add CX power domains
- Implement review:
   - correct address ranges for DPU, DSI PHY and DP;
   - add DP address spaces for P2, P3, MST2 and MST3;
   - wrap lines

- Note that DP will work only after adding USB mux, for which I have
  work in progress in github qualcomm-linux/kernel-topics.git, branch
  early/hwe/eliza.  It depends on unfinished I2C support.

- Link to v1: https://patch.msgid.link/20260331-dts-qcom-eliza-display-v1-0-856f0b66b282@oss.qualcomm.com

Description
===========
DSI panel and DP work fine.

HDMI is not yet ready, because of lack of hardware with HDMI (work in
progress).

Best regards,
Krzysztof

---
Krzysztof Kozlowski (3):
      arm64: dts: qcom: eliza: Add display (MDSS) with Display CC
      arm64: dts: qcom: eliza-mtp: Enable DSI display panel
      arm64: dts: qcom: eliza-mtp: Enable DisplayPort on USB

 arch/arm64/boot/dts/qcom/eliza-mtp.dts |  71 ++++++
 arch/arm64/boot/dts/qcom/eliza.dtsi    | 444 +++++++++++++++++++++++++++++++++
 2 files changed, 515 insertions(+)
---
base-commit: 1f68839a688f612e0dc183559adf9161f15db297
change-id: 20260327-dts-qcom-eliza-display-64de3cfc8a50
prerequisite-change-id: 20260330-eliza-adsp-usb-8ef2b1b0fc13:v1
prerequisite-patch-id: e0744310fa58e080587218e62aa6686ed841689f
prerequisite-patch-id: 1b4e40eb33adf28c8b6105f25f6636f82239a962
prerequisite-patch-id: 4671af784a83f9ce69cc2c502912698476ee7719

Best regards,
--  
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>