This series adds initial remoteproc support for AMD MicroBlaze soft
processors.

The binding models the MicroBlaze remote processor as a child node whose
reg property describes the executable firmware memory window in the
MicroBlaze-local address space. The parent bus ranges property provides
the standard devicetree address translation to the Linux-visible system
physical address.

The driver uses that translated memory window as the executable
remoteproc carveout and coredump segment, holds the MicroBlaze in reset
through an active-low GPIO until firmware loading completes, and allows
the firmware image to be selected with the optional firmware-name
property. Firmware images without a resource table are also accepted.

This initial series focuses on basic load/start/stop support for a
single executable memory window. It does not add any transport or
mailbox integration.

Ben Levinsky (2):
  dt-bindings: remoteproc: add AMD MicroBlaze binding
  remoteproc: add AMD MicroBlaze driver

 .../bindings/remoteproc/amd,microblaze.yaml   |  67 ++++++
 MAINTAINERS                                   |   7 +
 drivers/remoteproc/Kconfig                    |  15 ++
 drivers/remoteproc/Makefile                   |   1 +
 drivers/remoteproc/amd_microblaze_rproc.c     | 202 ++++++++++++++++++
 5 files changed, 292 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/amd,microblaze.yaml
 create mode 100644 drivers/remoteproc/amd_microblaze_rproc.c

-- 
2.34.1