Replace the magic number with an existing define for the LEDCR
register page number on the RTL8211F.

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
---
 drivers/net/phy/realtek/realtek_main.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/realtek/realtek_main.c b/drivers/net/phy/realtek/realtek_main.c
index 75565fbdbf6d..536cbb3820eb 100644
--- a/drivers/net/phy/realtek/realtek_main.c
+++ b/drivers/net/phy/realtek/realtek_main.c
@@ -874,7 +874,7 @@ static int rtl8211f_led_hw_control_get(struct phy_device *phydev, u8 index,
 	if (index >= RTL8211x_LED_COUNT)
 		return -EINVAL;
 
-	val = phy_read_paged(phydev, 0xd04, RTL8211F_LEDCR);
+	val = phy_read_paged(phydev, RTL8211F_LEDCR_PAGE, RTL8211F_LEDCR);
 	if (val < 0)
 		return val;
 
@@ -936,7 +936,8 @@ static int rtl8211f_led_hw_control_set(struct phy_device *phydev, u8 index,
 	reg <<= RTL8211F_LEDCR_SHIFT * index;
 	reg |= RTL8211F_LEDCR_MODE;	 /* Mode B */
 
-	return phy_modify_paged(phydev, 0xd04, RTL8211F_LEDCR, mask, reg);
+	return phy_modify_paged(phydev, RTL8211F_LEDCR_PAGE, RTL8211F_LEDCR,
+				mask, reg);
 }
 
 static int rtl8211e_led_hw_control_get(struct phy_device *phydev, u8 index,
-- 
2.51.0

On Sat, Apr 11, 2026 at 12:51:45PM +0200, Aleksander Jan Bajkowski wrote:
> Replace the magic number with an existing define for the LEDCR
> register page number on the RTL8211F.
> 
> Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>

Reviewed-by: Daniel Golle <daniel@makrotopia.org>